Manufacture a Product for me

I do have a job to build three pilot plants as follow: Process Operation Trainer Unit: · Closed flow circulation of hot and cold water or glycol solution or any other safe fluid through pipe networks. · Pumps · Heater and cooler unit. · Shell and tube heat exchanger. · Manual and automatic control valves. · Manual by-pass valves · Strainers. · Chemical injection points, sampling points, safety relief valves, safety shower and eye wash, etc. · Unit may have the capability to be operated stand-alone or preferably integrated with other pilot plant units. Distillation Process Operation Trainer Unit: · Binary mixture of water and any other safe fluid to be used as feed stock. · Distillation process to separate feed stock to nearly pure water and sample fluid with recycling the fluid to feed tank to ensure continuity of operation. Utility Plant: · To provide necessary utilities for the above two units. · Compressor, steam boiler and the de mineralization section of the unit. · Compressor shall provide enough supply of instrument air for all pneumatic operated instruments. · Steam boiler unit to supply enough steam to reboiler in the distillation and heat exchangers. · De mineralization unit is to provide purified water and fluids to units as per required quantity. Automation: · Emergency interlock systems to be provided on all units for safely operating and automatic response of various instruments. · Basic Emerson delta V control system to be employed. · System to be configured to control all the pilot plants. · Complete set of transmitters/field buses and I/O modules. · Suitable number of operator stations to supervise and control the process.