Custom Arduino Code for Stepper Motor Control with RFID and LCD Display

$30-250 AUD

Pågår

Lagt ut

15 dager siden

$30-250 AUD

Betalt ved levering

Hi there, I'm looking for an expert in Arduino programming who can develop custom code. I have all the hardware including an Arduino Uno R4, a NEMA 17 stepper motor, an A4988 stepper motor controller, an RC522 RFID antenna, a 1602IIC LCD display, and push buttons. All of these components need to be connected to the same arduino. I need this system function as follows: - When the push button is pressed, the stepper motor will be moved X amount of steps in one direction after a delay of 1 second. At this time, the LCD display should display "Scan ID to Unlock". - When a registered and accepted RFID tag is scanned, the LCD will display "Tool Unlocked". When this happens, the stepper motor should be moved X amount of steps BACK to where it came from. - If an RFID card which is NOT registered (ie not valid) is scanned, the stepper motor should not move and the LCD display should say "Invalid User. Access Denied". As I am not amazing at this kind of thing, I will also need to be supplied with a wiring diagram on how to EXACTLY wire up the system so that it works with the code you make. Within the code itself, please also make comments on what each section of the code is doing, so that I can gather a better understanding. Please make sure it is relatively for me to alter elements such as steps made by the stepper motor and messages displayed on the LCD display. I understand that for the stepper motor/controller I will need to supply external power, which is fine. If possible, I would like to also somehow be able to see a log of who had "unlocked" the tool. Not sure how this would work but if it is possible please let me know. IF for the LCD display I need to get one of the fancy I2C display adapters to make the wiring work, please inform me and I will get one. Thank you for your help.

Software Architecture

Prosjekt-ID: 38056829

Om prosjektet

24 forslag

Eksternt prosjekt

Aktiv 14 dager siden

Ønsker du å tjene penger?

E-postadresse

Fordeler med budgivning på Freelancer

Angi budsjettet og tidsrammen

Få betalt for arbeidet ditt

Skisser forslaget ditt

Det er gratis å registrere seg og by på jobber

Tildelt til:

@macroenergy

Dear project holder, Thank you for sharing such a detailed and interesting project. My name is Metin, and I am an expert in Arduino programming and electronics with years of experience working on similar projects. I have successfully managed numerous tasks like designing digital and analog control systems, motor drives, RFID integration, and LCD displays. With my proficiency in C programming and wide knowledge of multiple microcontrollers including Arduino Uno R4, I can easily complete your requirement list. I will create neatly structured code that not only serves your present needs but also allows for future adjustments. Additionally, as requested, I will provide a clear wiring diagram along with detailed comments throughout the code. Coming to your last request for a tool access log, this is definitely feasible. My approach would be to store the successful RFID scans along with current date-time in non-volatile memory (EEPROM) of the Arduino, so even if it's powered off, data won't be lost. We can later retrieve the logs via either serial monitor or even LCD display if you prefer. In summary, choosing me ensures you get an experienced professional who thrives on clean code, documentation, thorough understanding, and customer satisfaction. I look forward to discussing further specifics with you to ensure we develop a system that aligns perfectly with your needs. Thank you for your consideration. Best Regards, Metin (970 Chars)

$84 AUD om 7 dager

4,9

(110 omtaler)

7,0

24 frilansere byr i gjennomsnitt $171 AUD for denne jobben

@ahmedmohamed85

Dear sir I have more than 10 years experience in embedded systems design including Arduino and STM32 microcontrollers, I have implemented motor controllers including PID and SVWM, Also I have done many RFID interfaces with Arduino, using Parallex, I am very interested in doing this project

$250 AUD om 7 dager

4,9

(299 omtaler)

7,7

@ircrashed

Hello I have got your job posting “Custom Arduino Code for Stepper Motor Control with RFID and LCD Display” and I am very much interested to work in your project. I am a circuit designer and have more than 5 years experience of working with the Analog/Digital Electronics embedded systems(Arduino, Raspberry pi ,ARM processors ,PIC microcontrollers, ESP Wifi/Wireless boards, TFT Touch Displays, All types of sensors and actuators).I have done tons of similar projects So, I think you’ll find that, I have the skills you’re looking for. For more on my skills and successfully finished projects, please have a look on my Profile and Portfolio. I have all the components available here with me so I will develop a working prototype according to your specifications and then send you the code and schematics so things will work for sure. I will remotely guide you and help you build the system on your side. I am always available on Email and Skype. Please have a voice or video chat if necessary. I shall be available round the clock and able to start your project as soon as possible according to you. Thank you for your consideration, Best Regards, Haseeb Shafqat

$150 AUD om 7 dager

4,9

(80 omtaler)

6,6

@crucifige

I have BSc from electrical engineering, MSc from mechanical engineering, am currently preparing my PhD thesis about control enginerring. I have designed and realized various automation projects in industrial grade. Please contact me to discuss further about your project and create milestones.

$300 AUD om 10 dager

5,0

(140 omtaler)

6,6

@mairajali11

As an Electrical/Electronics Engineer and the co-founder of 365SoftTec, I have not only vast experience in web, app development and SEO but also a strong grounding in the intricate world of Arduino programming. Over the years, I've successfully navigated similar tasks as yours such as developing custom code for Arduino projects with various sensors, modules, and displays. Understanding your concerns about keeping the code comprehensible to you, I'm confident in my ability to maintain clear comments throughout the code to offer insights into each section's function. My expertise in C programming and proficiency with tools like Altium, Eagle will ensure a solid well-commented wiring diagram that precisely serves your needs. Additionally, I appreciate your desire for a log system. We can achieve this by using an SD card module with the Arduino. The scanned RFID tag IDs can be logged along with timestamps for you to keep track. Rest assured, I believe in producing efficient and adaptable code that allows users to adjust elements such as the number of motor steps or displayed messages easily. I genuinely value open communication and tailor-making solutions that best suit my clients' needs. Let's chat further about your project, get even more clarity on what you're looking for, and start building an impeccable system together!

$140 AUD om 7 dager

4,9

(74 omtaler)

6,1

@poduzov

Hi I'm an electronics engineer with 10+ years of experience, including Arduino, ESP, STM, and Raspberry. I have all the hardware for the project - RFID reader, Arduino, stepper motor driver, i2C LCD display and am ready to start immediately. Please contact me to discuss the details. Best regards, Dennis

$200 AUD om 10 dager

5,0

(35 omtaler)

5,7

@tshibsamuel477

Hello, I specialize in Arduino programming and can develop custom code to meet your requirements. I'll ensure the seamless integration of the Arduino Uno R4 with the NEMA 17 stepper motor, RC522 RFID antenna, 1602IIC LCD display, and push buttons. The system will function as described, with clear comments in the code for easy understanding and flexibility. I'll provide a detailed wiring diagram for your reference. Regarding the log of tool usage, I'll explore feasible options and discuss them with you. If necessary, I'll advise on acquiring an I2C display adapter for the LCD display. Looking forward to working on this project with you. Best regards, Samuel TShibangu

$180 AUD om 1 dag

4,9

(42 omtaler)

5,4

@omnamasshivay

yeah i m well versed with the Arduino so as i got your task ready to start work from now

$500 AUD om 2 dager

5,0

(9 omtaler)

5,0

@MuAdel17

Hello dear, As a professional embedded software engineer, I've worked on many projects that involved many different microcontrollers and wide range of applications, including Arduino series, and other complicated targets regarding ARM microprocessor such as stm32f1/stm32f4 and tivaC Microcontrollers. I've interfaced with wide range of sensors, and worked on many IoT solutions using MQTT, HTTP, BLE and other protocols. Kindly check my profile to see my previous work and experience. I'm really interested in providing a completed and professional work. Looking forward to hearing from you soon to further discuss your project needs. Best Regards, Mohamed Elnaggar

$160 AUD om 10 dager

5,0

(8 omtaler)

4,1

@devbaloni1983

I have more than 15 years of experience in the development As I am an expert, I can build it according to your requirements. Because I have a lot of experience in these fields, I can build your project as soon as possible. I offer excellent software quality work and provide the best support for your project. If you give me this job, I will do my best to finish your job by your timeline. If you want to see my past works, I can show you my past works right now. Ready to discuss this with you about the task now. Thank you for the reading.

$100 AUD om 7 dager

5,0

(7 omtaler)

4,0

@botiko123

Hi! I am working in Arduino development as a hobby for more than 10 years now. I have developed multiple cool projects like a crossroad with intelligent signals, or an Iron Man mask that opens up bot on button or with touch, automatic flower watering, etc. Worked with multiple types of servos, RFID scanner, and everything that your project needs. Contact me in private to discuss more about your project and your needs! Thank you in advance, Best regards, Botond!

$250 AUD om 7 dager

5,0

(5 omtaler)

3,5

@DGM999

Hello Harry F., I am Sadat Saeed, a Software Architecture expert with 8 years of experience. I have carefully read your requirements for the Custom Arduino Code project. I propose to develop custom code for stepper motor control with RFID and LCD display. I will ensure that the system functions as per your specifications, including the movement of the stepper motor based on RFID scans and displaying messages on the LCD screen. I have a strong track record of successful projects and positive client feedback. You can review my portfolio at https://www.freelancer.ca/u/DGM999 Let's discuss further details in chat. Best regards, Sadat Saeed

$85 AUD om 3 dager

5,0

(2 omtaler)

2,0

@CyberSasu

DEMO READY. With extensive knowledge in Arduino and microcontrollers, I am confident that I can deliver a functional system that meets all your requirements. I have hands-on experience with similar projects involving stepper motor control, RFID, and LCD display. This direct experience means I can execute your project effectively using the Arduino Uno R4, A4988 controller, NEMA 17, RC522 RFID antenna, and 1602IIC LCD display you have. In addition to developing the custom code for your project, I'll also provide a secure wiring diagram for easy installation. To support your better understanding of the codebase, I'll include detailed comments explaining the functions of each section. You'll be able to modify parameters like steps made by the stepper motor and messages displayed on the LCD screen conveniently. My commitment to quality extends beyond functionality. As such, if it's possible to implement a log file of tool users in your system, I'll not only make it happen but also ensure it's an intuitive process for you to check at your convenience. With a well-organized approach and a demonstrated history of problem-solving proficiency like this, I'm confident you will be satisfied with my work. Let's bring this project to life together!

$80 AUD om 7 dager

5,0

(3 omtaler)

2,0

@dishasudra

I'm excited to take on your Arduino project, crafting custom code to seamlessly integrate your hardware components. With my expertise, I'll ensure your system operates smoothly. I'll provide a comprehensive wiring diagram and detailed comments within the code for easy understanding and future adjustments. Additionally, I'll explore options for user logging and suggest integrating an I2C display adapter if necessary. Let's make your project a success together!

$105 AUD om 5 dager

0,0

(0 omtaler)

0,0

@EngrSadiaa

Having examined your detailed project requirements, it's clear that my experience in Arduino and electronics aligns perfectly with your needs. I have a deep understanding of integrated systems, and that expertise will allow me to seamlessly integrate the stepper motor, RFID antenna, and LCD display into your Arduino Uno. My commendable grasp on wiring automation solutions will ensure you receive a comprehensive wiring diagram and a user-friendly code with comprehensive comments for easy customization. Ultimately, let my track record for diligent performance, demonstrated through projects involving Assembly programming, FPGA work using Verilog/VHDL, and Image Processing dexterity, speak for itself. I bring to bear a rich toolkit of skills encompassing MATLAB/SIMULINK mechanics filtering techniques all ultimately for optimizing performance and ensuring I'm available even after project completion. Moreover, with me on board, be assured of timely progress updates as I take pride in effective communication with my clients at every step of the way. Thank you for considering my bid; I look forward to discussing how best we can realize a robust yet user-friendly solution to meet your needs.

$140 AUD om 7 dager

0,0

(0 omtaler)

0,0

@haider06021996

I am an electronics engineer with a vast experience in embedded systems. I did these kind of projects very often. I understood your problem 100% and 100% confident that I could deliver it efficiently within specified time period. Feel free ask anything if you have any query regarding how I would do that project or whether I have relavant experience or not. I would happy to give you confidence that I am the right person for this project.

$250 AUD om 7 dager

0,0

(0 omtaler)

0,0

@Nuraizatul9902

With my extensive experience in Arduino programming and connecting various extensions like the ones you listed, I'm confident that I can deliver the precise solution you need for your stepper motor control project. I have developed several similar projects involving Bluetooth, stepper motors, and LCD displays, giving me valuable insights into tackling the challenges they pose. I understand the complexities of your project and will prioritize clarity and thoroughness in both the code I provide and in explaining its different segments. You can expect detailed comments on each section of the code, which will help you navigate it easily and make any necessary alterations later on. For the LCD display wiring part, I'll confirm if an I2C display adapter is needed for your specific case after assessing the rest of your hardware configuration. After we complete the project, I will provide a comprehensive wiring diagram to ensure that everything is connected appropriately to facilitate understanding and any future modifications you may consider.

$250 AUD om 15 dager

0,0

(0 omtaler)

0,0

@Erolchelik

Hello, I have many experiences at steppers and rfid systems. We can easily go on together with this project. My 12 years of experience in industrial automation has given me a deep understanding of not just the Arduino platform but also stepper motors, RFID antennas, and LCD displays. This means I can help you design a robust system that suits your specific needs. I understand that the security of your tool is paramount, and my expertise in wiring and programming will ensure that your stepper motor works correctly with the A4988 controller, while perfectly integrating with the RC522 RFID antenna and 1602IIC LCD display. I'll make sure that messages displayed are clearly understandable, and the wiring diagram I provide will be easy for you to follow. Lastly, we can discuss any tweaks or changes you would like/amendments to be made after completion. Let's make this system work efficiently for your unique requirements while you gain more knowledge about its operations. Allow me to bring my knowledge and expertise to bear on your project – together, our possibilities are endless!

$140 AUD om 7 dager

0,0

(0 omtaler)

0,0

@VimaldasK

I am 10+ years of experience in Arduino programming as well as circuit board designing. I have designed and implemented so many automated projects in both domestic as well as industrial applications. I am confident in this project to meet your requirement. We can use the same code for stand alone systems using Atmega8 microcontroller also instead of Atmega328p with Arduino board as a professional approach.

$95 AUD om 7 dager

0,0

(0 omtaler)

0,0

@varun450

Quick Proposal for Arduino Software Development Objective: Develop custom Arduino software to control a stepper motor, RFID reader, and LCD via Arduino Uno, integrating secure access functions. Scope: Software Development: Program Arduino to interact with stepper motor, RFID, and LCD based on user actions. Documentation: Provide a detailed guide and wiring instructions for system setup and customization. Deliverables: Arduino code files with extensive comments. PDF instruction manual with wiring diagrams. Timeline: Completion within 1 week from the start date. Payment Terms: 50% upfront, 50% on completion. Acceptance: Full ownership of software and documentation transfers upon final payment.

$80 AUD om 7 dager

0,0

(0 omtaler)

0,0

@nirmal9182001811

I'll create Arduino code for accurate Stepper Motor control via RFID, connect it to an LCD for instant updates, and provide clear instructions and flexible settings for easy use. Excited to work together for a customized solution that fits your project perfectly!

$141 AUD om 6 dager