Pid temperature controller schematic jobber
I require an intricate hardware developer with technical mastery to custom design an isolated encoder signal splitter board that's compatible with Arduino micro-controller, specifically ATmega2560. Key Features: 1. Voltage Isolation: The board must feature voltage isolation to ensure safe transmissions. 2. Compatibility: It must be fully interoperable with Arduino libraries which serves as a platform for expansion and experimentation. 3. Signal Amplification: the board should not draw more current than pull-up resistors for incremental encoders connection. If required, a signal amplification needs to be implemented. Standard signal voltage is 5V DC. Main Purpose: 1. Noise Reduction: It should provide clear communication by suppressing ambient noise in the signal. There is a...
...accelerator. Our main objectives for this project are: • Research and development specifically relevant to unsaturated polymers • Achieving an optimal medium cure time • Minimizing waste through precise usages of chemicals at specific temperatures Our goal is to achieve the best cure time and minimize waste. However, we’re facing challenges during the winter and rainy seasons, typically when the temperature drops to around 5 degrees Celsius and the conditions become humid. During these periods, we’ve observed that the reaction does not start as expected. We’re unsure about the precise quantities of hardener or accelerator to use under these conditions. We’re seeking your expertise to help us understand how to adjust the quantities of ...
Portal details: We are seeking a highly skilled Drupal developer tin developing our existing Case Management System into a modular and API-driven architecture. The project involves migrating from Drupal 6 to the latest version of Drupal while implementing a Model-View-Controller (MVC) pattern to enhance maintainability and scalability. Responsibilities: • Analyze the existing codebase to identify areas for modularization and API integration. • Design and implement modular architecture following MVC principles, ensuring clear separation of concerns. • Develop RESTful APIs to facilitate communication between modules, adhering to industry best practices. • Refactor and migrate existing functionalities into the new architecture
I'm in need of an electronics circuit designer who can create a basic level sensor interface circuit for a radio. Key Requirements: - The circuit is a sensor interface for a radio. - The complexity level is basic, meaning it should be able to perform simple functions like temperature sensing. Ideal Skills and Experience: - Proficient in electronics circuit design. - Experience in basic level sensor interface design. - Understanding of radio electronics is a plus.
I have a project that requires setting u...project that requires setting up an 8 Channel Arduino Relay Module and programming it to operate using a basic 4 button hand controller. My Arduino board of choice is the Arduino Uno. For the hand controller, I need different functionalities: - Each button should be able to toggle a specific relay on and off. - Certain buttons should cycle through a sequence of relays. - Some buttons should have the ability to control a combination of relays. Importantly, only 1 relay should be controlled at a time. The ideal freelancer for this project should have a deep understanding of Arduino programming, particularly with Arduino Uno, and experience with relay modules and controller setup. Familiarity with creating flexible, customiz...
...framework. The API will be designed to manage interactions with a database using a single, generic controller capable of handling all database tables. This project will involve implementing advanced features such as column selection, filtering, sorting, pagination, and complex table relationships like aggregations and master-detail references. Core Requirements: 1. API Framework: The API should be developed using .NET 8. I am open to using either OData or GraphQL for the API architecture, depending on what the developer finds most suitable for the project requirements. Alternative suggestions are welcome for discussion. 2. Generic Controller: The API should feature a single, generic controller that can dynamically handle all tables within the database. This approa...
...Regulation: Conversion of 24V input to 12V and 5V outputs. MOSFETs: 5 MOSFETs for 24V, 7A control. 4 MOSFETs for 12V, 5A control. Communication: USB Type-C for robust serial communication. Inputs and Outputs: 2 analog inputs. 1 One Wire communication interface. Additional pins for digital input/output as required. Deliverables: Complete PCB design files ready for manufacturing, including gerber files. Schematic capturing and PCB layout. BOM (Bill of Materials) with sourcing options. Documentation for assembly, testing, and troubleshooting. Qualifications: Proven track record with PCB design for power-intensive and multi-function projects. Proficient with voltage regulation techniques in PCB designs. Familiarity with RP2040 microchip and serial communication protocols. Proficien...
I am on the lookout for a highly skilled electrical designer with in-depth knowledge of electrical and schematic designs for commercial, residential, and institutional and healthcare projects an asset. Your role will involve: - Designing electrical design and schematics for commercial spaces including but not limited to office spaces, retail stores and restaurants - Creating detailed layouts that ensure safety and comply with all electrical codes and standards - Conducting thorough load analysis to optimize electrical system performance Having previous experience in electrical design will help to better understand the job requirements and deliver high-quality results. This project involves all aspects of electrical design including residential, commercial, healthcare, and inst...
I'm seeking a skilled indi...handing over after initial setup. The tasks include: - Watering & Nutrient Monitoring: Ensuring plants receive adequate water and nutrients, adjusting as needed. - pH Level Management: Regular monitoring and adjusting for optimal growth. - Temperature Control: Checking and maintaining temperature settings. - Harvesting & Replanting: Timely harvesting and replanting as per the growth cycle. The ideal candidate should have: - Strong background in hydroponics - Proficiency in nutrient and pH management - Experience in managing lighting and temperature settings - Proven track record in harvesting and replanting in hydroponics - Ability to oversee management of day to day operations efficiently and effectively and troubleshoot. ...
I am seeking a talented mechanical designer with expertise in any 3D software who can support with the digital 3D prototyping phase of my project. The output files must be parametric files that can opend by FreeCad (I not accepted any mesh files as output). Main duties include: - Making use of 3D SW to crea...requirements. Ideal Skills: - Proficiency in 3D software - Extensive experience in 3D prototyping - Strong communication skills - Attention to detail - Experience in the field of mechanical design. Please share your past projects related to 3D mechanical prototyping using FreeCad to support your bid. The design includs a differential unit (reduced to 3 tooth wheels) and a freewheel ratchet. A schematic description will be sent to the cadidate freelancers. This is a su...
...focusing on building wiring. This project is for a college assignment. The project requires the preparation of the following AutoCAD drawings: Containment Drawing: Showcasing the paths and management of electrical conduits and other containment systems. All containment will be mounted on suspended Unistrut brackets, with a minimum of 800mm of space above the false ceiling. Single Line Schematic: A detailed schematic for the main distribution board, illustrating the arrangement and connections of switches, fuses, circuit breakers, and other electrical components. Layout Drawings: These will include separate sheets for: Fire Alarm System: Displaying all devices and their connections throughout the building. General Services & Power: Illustrating the placement and rou...
I am looking for a skilled developer to port an existing monitoring program from Windows XP, written in C#, to a modern Windows version or to Linux. The program is currently written in C# ...in programming with C#. - Expertise in porting applications between different operating systems. - Prior experience with implementing real-time monitoring, data visualization, and control functionalities. - XEY ! The software is to monitored controllers with 3analog inputs, 2 analog outputs, 10 digital inputs, 10 digital outputs, over simple serial communication, software can link up to 128 controller. If you have the right skills and experience, please don't hesitate to request for the place your bid. Copy of the source code will be provided for potential successful bidders for furthe...
Написати код для проекту розробка системи контролю мікроклімату на базі arduino leonardo (є також UNO) в середовищі Arduino IDE Макет буде у коробці у якій треба буде продемонструвати роботу. Треба щоб на екрані відображалась поточна температура та також можливість встановлювати температуру через джойстик. Треба щоб значення температури регулювалась через PID-регулятор (програмно) для того щоб пристрої охолодження та нагріву змінювали потужність плавно в залежності від поточної температи. Список датчиків та деталей: 1. Датчик вологості та температури DHT11 (Є також bme 280) 2. Датчик газу MQ2 3. LCD1602 з i2c 4. Джойстик для ардуіно 5. Вентилятор 5v або 12v - для охолодження повітря (такий який в ПК встановлюється) 6. Нагрівальний елемент – лампа накалювання (не остат...
...Organisation Tool to Flutter, with the aim of releasing it as a web application. The primary objectives of this project include implementing a robust user authentication system, enhancing work organisation capabilities through calendar events, introducing user profile management for self-updating special user data, incorporating team management by assigning role models such as Teammember, Teamorganiser, Controller, Boss, and Admin, adding communication options to send team emails, chats, SMS, and WhatsApp messages, including timestamp functions for each team member with a summary feature for administrators and special users, and integrating the ability to view uploaded pictures and videos. **User Authentication:** - Develop an email and password authentication system fortified w...
I'm seeking a seasoned freelancer with substantial experience in ESP32 programming and Nextion Display configuration. Your primary task will be to develop a comforting touchscreen control system that's attention-grabbing and user-friendly. This project r...user-friendly. This project requires: - Design and implementation of a multi-level menu structure. The idea is simple: we want users to navigate easily through various menu options without experiencing any difficulties. - Wireless connectivity isn't required. Key Skills: - Exceptional understanding of ESP32 programming. - Proven expertise with Nextion Display setup. -SD Card Read. -PID Control Please ensure your proposal demonstrates your experience with these specific requirements. Looking forw...
I need help to build a library for the tmp1827 (Texas Instruments) onewire sensor in arduino. It should run also with an ESP32. The Library should have at least following methods: Read temperature Read unique ID Write EPROM Read EPROM
As an individual working on a project, I need support with OrCAD. Specifically, I require assistance with: - The designing of a schematic - Simulating the subsequent circuit behavior The particular circuit is complex, requiring expertise in a variety of component types. Your knowledge should extend to understanding the function and interaction of these component types in a complex circuit. The project timeline is fairly critical. I anticipate the work to be completed within 1-2 weeks from the start date. Please take this into consideration when bidding. Ideal skills and experience include: - Extensive experience with OrCAD Schematic Design & Simulation - An understanding of a range of component types - Comfortable in working with complex circuits - The ability to ...
I am in need of a skilled professional with experience in developing a Mitsubishi PLC program. The program is intended to control equipment using PID (Proportional, Integral, Derivative) control system. It should be able to handle both analog and digital input/output signals. Key requirements include: - Developing a Mitsubishi PLC program for PID control - Integrating both analog and digital input/output signals into the PLC program - Ensuring the program is efficient and effective in controlling the equipment The ideal candidate should have: - Proven experience in developing Mitsubishi PLC programs - Expertise in PID control system - Previous work with both analog and digital signals - Ability to deliver efficient and effective control systems I have a small test j...
I’m looking to make a smart controller that can integrate with 12v compressors for inflating tires on off road vehicles. Mainly I need the the pcb and electronics designed and I can make the housing and everything else. If you would also want to design the housing in ok with that. Needs to be almost waterproof. Mainly splash proof and heat resistant. It will be mounted in the engine bay. As far as the controller goes all it need to be able to do is check pressure from a pressure sensor that will be connected in line from the compressor and control a 12v output source(5a at 12v) to trigger the compressor to turn on as well as for deflating need a valve to be controlled to air down to set pressure. Looking for keep it as simple as possible. Only gonna need about 4 buttons...
Hi there, I'm looking for an expert in Arduino programming who can develop custom code. I have all the hardware including an Arduino Uno R4, a NEMA 17 stepper motor, an A4988 stepper motor controller, an RC522 RFID antenna, a 1602IIC LCD display, and push buttons. All of these components need to be connected to the same arduino. I need this system function as follows: - When the push button is pressed, the stepper motor will be moved X amount of steps in one direction after a delay of 1 second. At this time, the LCD display should display "Scan ID to Unlock". - When a registered and accepted RFID tag is scanned, the LCD will display "Tool Unlocked". When this happens, the stepper motor should be moved X amount of steps BACK to where it came from. - If ...
...when heat disperse, heat exchange will not be balance. Compression flow must be precision. Must know how a stirling cryocooler works. Must have some knowledge through gas especially density and purity. Pressure generates gas and changes its form. Stirling cryocooler consists of a high pressure compression that compressed the gas back a forward that creates the heat exchange and causes the temperature drop that forms cooling as why it is called cryocooler. Now I have to enter more characters, words as asked in order to have enough so that this can be load through for viewing by freelancers. Gas that makes cryocooler possible are reactive. When they are reactive, they can be put through a debouncing effect that causes cooling different and more advance compare to being c...
...reading a variety of vital signs and sending corresponding signals. This will be the start up phase for the device, which in end phase will be able to detect and alert for other signals like: environmental signals, chemical signals, thermal sensors, motion sensors, and/or communication and GPS signals. Key Features: - The device should have the ability to read heart rate, blood pressure, and temperature. - It should be able to send alert notifications in case of abnormal readings. - The device should also have the capability to send data to a mobile app and a cloud server, allowing for remote monitoring and data collection. Ideal Skillset: - Proficiency in electronics design and prototyping, particularly in the development of wearable devices. - Understanding of medical elect...
I'm in need of a skilled PCB designer to create a design for a straightforward electrical device focused on temperature control. Key Details: - The main function of the device is temperature control. - I already have in mind the components that I need for the device such as temperature sensors, and cooling/heating elements. - The desired temperature range for the device to control is around 40°C. Desired Skills and Experience: - Proficiency in PCB design, particularly in the context of temperature control devices. - Experience in working with temperature sensors and cooling/heating elements. - Understanding of the thermal dynamics and the design constraints of temperature control devices. - Ability to bring this project to life i...
Vennligst Registrer deg eller Logg inn for å se detaljer.
Vennligst Registrer deg eller Logg inn for å se detaljer.
The following features are important for the Smart Thermostat Valve: -There must be temperature and humidity sensors. -For double-sided communication between the thermostat and GateWay, it must be provided with RF 433 MHz communication protocol. -Must be powered by AAA or AA batteries. -Communication between devices should be encrypted for data security. -It should have low power consumption. -All source files must be shared at the end of the project. The Software Gateway requires the following: -Must be able to connect to the internet via Wi-Fi protocol via a Gateway. -The product must be controllable via mobile application. -It should include various automation modes. -The data in the sensors must be tracked during the time they are stored. -All source files must be shared at ...
...3: Common Reasons to Change Insulation Asthma: Upgrading insulation can reduce indoor air pollutants that aggravate asthma symptoms. Allergies: Improved insulation helps minimize allergens and dust particles circulating in the home. Dust Throughout House: Proper insulation reduces dust infiltration, promoting cleaner indoor air. Hot/Cold in Various Rooms: Inadequate insulation can lead to temperature inconsistencies throughout the home. High Energy Bill: Outdated or insufficient insulation contributes to increased energy consumption and higher utility bills. Slide 4: How Most Homes Were Insulated vs. How They Should Be Insulated Illustrate typical attic insulation practices in older homes versus modern, energy-efficient insulation standards. Emphasize the importance of upgr...
...revise my existing pole barn plans to meet the requirements of the Fire Marshal in Louisiana. Key Requirements: - Structural Modifications: The primary changes needed for the plans are structural in nature. These modifications are necessary to ensure the building meets safety standards and regulations set by the Fire Marshal. - Insulation: The revised plans should also include insulation for temperature control. This is essential, as the pole barn will be used for storage and office space. - Ventilation System: Another key requirement is the inclusion of a ventilation system in the plans. This system is crucial to maintain air quality and create a comfortable environment inside the pole barn. Ideal Skills: - Professional Engineering Background: The ideal candidate should have ...
This is a project for concept design, schematic design and design development of a detached single family house. *Project Description* An architect is sought to deliver a concept, schematic design and design development of a detached single family house in a rural/natural setting. The house would be on two floors with gross area in total approx. 350sq m, plus basement. The work will be based on a rough sketch of the floor plans that we will provide, along with other program requirements. The architect will be required to improve our project program in communication with us, in order to identify opportunities, cost savings, and extra value in the project of which we may not have been aware. The results of this project must be suitable to serve as inputs towards a complete ...
...that will be used for sales and marketing purposes. The primary task is to remove any existing graphics from the vans, making them appear as plain white vans, and adjust the images for a professional look. This includes modifying brightness, color temperature, and other necessary photo corrections. Key Responsibilities: Remove all visible graphics from the van images, ensuring the van appears plain white. Where featured, retain the "Courier Academy" logo on the van but ensure no other logos or text are visible. Adjust brightness, color temperature, and make general enhancements to the photos to achieve a professional and appealing look. Remove the "Yellow Express" logo and any yellow references on the man's uniform in the images. Follow the styli...
Description:** We are currently facing critical issues with our network setup and are looking for a freelance network engineer with expertise in Aruba environments and network access control (NAC) configurations. Below are the details of the issues we need help with: **1. Aruba Controller Issue:** - **Problem:** WiFi clients are unable to obtain an IP address from DHCP after authenticating the SSID. Despite having DHCP relay configured on our firewall (where the DHCP server is located behind), and the ip helper address configured under the VLAN of the WiFi clients, the issue persists. - **Requirements:** We need an expert who can troubleshoot and resolve DHCP relay issues in an Aruba controlled environment, ensuring reliable connectivity and IP address allocation for WiFi clients. ...
This project consist of following phases for its prototype development. Phase 1. Hardware Design 1. Schematic design 2. PCB Design 3. BOM (Bill of material) , PCB Gerber 4. PCB Fabrication 5. Components/Part procurement 6. PCB assembly Phase 2. Firmware/Code development and PCB testing Deliverables will be as given below: 1. Source PCB files 2. PCB Geber 3. BOM (Bill of material) 4. Source firmware 5. One working Prototype
I am in need of an industrial aut...experience in PIC programming and equipment integration. The project involves working with hotpress. • Your task will be to program Peripheral Interface Controllers (PIC) and integrate this with our existing equipment. • Further, knowledge in temperature control and pressure monitoring systems for hotpress is essential, as you'll be required to implement these functionalities in our automation system. Ideal skills and experience for this role would be: • Extensive PIC programming experience. • Experience with hotpress equipment. • Sound understanding of temperature control and pressure monitoring in automation systems. Your ability to successfully implement these tasks efficiently will high-light your eligib...
...when heat disperse, heat exchange will not be balance. Compression flow must be precision. Must know how a stirling cryocooler works. Must have some knowledge through gas especially density and purity. Pressure generates gas and changes its form. Stirling cryocooler consists of a high pressure compression that compressed the gas back a forward that creates the heat exchange and causes the temperature drop that forms cooling as why it is called cryocooler. Now I have to enter more characters, words as asked in order to have enough so that this can be load through for viewing by freelancers. Gas that makes cryocooler possible are reactive. When they are reactive, they can be put through a debouncing effect that causes cooling different and more advance compare to being c...
...to select the best shots - Enhancing colors without making them look unnatural - Adjusting white balance, brightness and contrast carefully - Setting the right temperature and saturation levels - Reducing noise and sharpening the images - Cropping the images as needed Your work should be meticulous and not overly edited, keeping the images looking natural while still making them appealing. Ideal Skills and Experience: - Proven experience in professional photo editing - Proficiency in Adobe Photoshop or similar software - Strong understanding of color correction and balance - Excellent knowledge of brightness, contrast, temperature, and saturation adjustments - Demonstrated ability in noise reduction and sharpening - A good eye for detail and composition - Previous exp...
I have a plant model for a solenoid that will push a rack to lock brakes and create a parking lock. I need assistance to create the control algorithm for this solenoid that will use full H bridge and PID I guess.
I am looking for an Arduino project that will have a range of features and capabilities to help me create Internet of Things (IoT) solutions. Specifically, I am looking for functionalities that include temperature and humidity monitoring, water level indicator, dc5v humidifier portable bluetooth speaker,soil moisture monitoring, multicolour led and remote control capabilities. In addition, I also need features such as a water level indicator, soil moisture indicator, fogger, and bluetooth operated. I need the remote control capabilities to have a range of 10-50 meters. Finally, I need the project to be able to control small sensors.
I require the development of a Printed Circuit Board (PCB) based on provided schematics and design guidelin. This PCB ...provided schematics and design guidelin. This PCB is specifically designed to amplify signals from a silicon PIN diode used to sense gamma radiation. Top Features: A PIN photodiode, four low-noise op amps and a comparator are used to detect individual photons of gamma radiation. Expertise: - A solid background in PCB design and experience in providing PCB manufacturing data Expected output: • Schematic and Source data in EAGLE or Protel 98/99/SE/Altium/Protel-DXP format. • Extended Gerber File RS-274X. • Bill of Materials (BOM) in Excel format, based on components from Digikey or Mouser. • Pick-N-Place / XY-File. Please share relevant exper...
Hello there, I have a working Op Amp circuit that I would like to increase the output Gain from 2 to 4. I have +12v single supply, I have Schematic In Altium. Please Check attachment. Let me know if you can help.
I'm looking for someone skilled in Arduino and SNMP integration who can create a sketch for my IOT project. Key requirements: - Utilize temperature and humidity sensors - Report sensor readings and their status via SNMP, specifically tracking temperature, humidity, and particulate matter (PM 1.0, 2.5, etc) -Utilize the eInk device for device status Ideal candidates should have good understanding and hands-on experience with environmental sensors, Arduino programming, SNMP protocols and Zabbix software. Hardware is the M5 AirQ device () I have attached the original config file that presents all sensor data via a web interface and should provide all the details required.
I'm seeking an expert in circuit design for consumer electronics. Very simple design with two LEDs when one LED is on the other will turn off. Very simple. Need schematic and BOM. NO pcb layout or gerber files needed. Please look at attached PDF before messaging me. MUST INCLUDE PROJECT NAME LISTED ON THE ATTACHED FILE IN MESSAGE TO ME OR YOU WIL NOT BE CONSIDERED Key requirements: - Knowledge and experience in circuit design, with a preference for consumer electronics - The ability to translate concept into a viable, efficient circuit design - Strong communication skills to understand the intended application and adapt the design accordingly Please include in your proposal examples of past consumer electronic circuit design projects, or any relevant experience.
I'm looking for a graphic designer who can create a bold and colourful personal branding package for my Yo...this channel is for gaming, and a graphic design of myself. - Video Intro and Outro: These clips should be brief but unforgettable. Showcase your creativity in designing an introduction and conclusion that keeps viewers coming back. Previous work with promotional videos or YouTube channels is preferred. The intro and outro should have something that indicates it's a gaming channel (Keyboard, controller or anything like that) Creativity, proficiency in graphic design software and strong understanding of YouTube’s platform are ideal qualities for this project. This is a fantastic opportunity to make vibrant and energetic personal branding elements that trul...
I am in need of an industrial aut...experience in PIC programming and equipment integration. The project involves working with hotpress. • Your task will be to program Peripheral Interface Controllers (PIC) and integrate this with our existing equipment. • Further, knowledge in temperature control and pressure monitoring systems for hotpress is essential, as you'll be required to implement these functionalities in our automation system. Ideal skills and experience for this role would be: • Extensive PIC programming experience. • Experience with hotpress equipment. • Sound understanding of temperature control and pressure monitoring in automation systems. Your ability to successfully implement these tasks efficiently will high-light your eligib...
...who can assist me in developing accurate transport equations for solvents in pressure-driven membrane processes. The ideal candidate should have a strong background in membrane technology, polymers, and understanding the impact of concentration and temperature on transport. Key responsibilities for this project will include: - Developing accurate transport equations for solvent and substance transport in pressure-driven membrane processes - Conducting sorption/diffusion analysis in polymers - Examining the impact of concentration and temperature on transport - Constructing and utilizing membrane modules - Calculating flux and selectivity - Analyzing fouling in membrane processes The desired level of accuracy for this project is high, so the successful candidate will nee...
...devices using Lora technology. Key Project Details: - The project involves simple packet sending between devices, specifically focusing on transmitting GPS coordinates. - You need to be proficient in Lora programming for this project. Previous experience in similar projects is highly desirable. - The sensors that need to be integrated with the Arduino for remote sensing and monitoring include temperature and humidity sensors, soil moisture sensors, as well as motion detectors. Ideal Skills and Experience: - Strong Arduino programming skills. - Proficiency in Lora technology. - Experience with integrating various sensors. - Experience with GPS location data handling. - 1 device is lilygo t-beam v1.2 and the other is Arduino uno with sx1276 Please get in touch if you have the r...
I'm looking for a skilled developer to create a simple graphical user interface specifically for an STM32H7 CPU. The interface is primarily intended for displaying the system's status and temperature. Key requirements: - The interface should be designed to run on the STM32H7 CPU, ensuring optimal performance and compatibility. - The primary purpose of the GUI is to display system status and temperature information. It should do this in a clear and easy-to-understand manner. Ideal skills and experience for this job: - Proficiency in GUI development, particularly for embedded systems - Strong understanding of STM32 microcontrollers and their associated toolsets - Experience in designing UIs for information display purposes - Experience using ST TouchGFX software ...
...software developer familiar with Python and Bitcoin ASIC miners. The core functionality of this software is to control and monitor miner status, including Hashrate, Temperature, and Uptime. Key Skills/Experience: - Extensive understanding of Python - Familiarity with Luxor firmware and pool APIs - Hands-on experience with Bitcoin ASIC miners' processes Scope: - Develop a software application that interfaces with Luxor firmware and pool APIs - Implement functionality to monitor miner status, specifically Hashrate, Temperature, and Uptime - Configure wifi/LAN port of the development board (banana pi r2 pro) - Integrate external temperature sensors and relay control (hardware interfacing is completed already) The complete boot/control/satefy logic are all comp...
I am in need of an industrial aut...experience in PIC programming and equipment integration. The project involves working with hotpress. • Your task will be to program Peripheral Interface Controllers (PIC) and integrate this with our existing equipment. • Further, knowledge in temperature control and pressure monitoring systems for hotpress is essential, as you'll be required to implement these functionalities in our automation system. Ideal skills and experience for this role would be: • Extensive PIC programming experience. • Experience with hotpress equipment. • Sound understanding of temperature control and pressure monitoring in automation systems. Your ability to successfully implement these tasks efficiently will high-light your eligib...
