Alarm app design jobber

I'm looking for an experienced and reliable programmer to program a basic intruder alarm system for a Honeywell Vista alarm system. I have the manual, so the programmer should have knowledge of how to best use it in order to program the alarm. The programmer should be familiar with the various features of the Honeywell Vista alarm system, as well as the hardware and wiring necessary for the successful installation of the alarm system. The programmer should also be capable of creating a program that appropriately detects intruder activity and sets off the alarm when necessary.

Vennligst Registrer deg eller Logg inn for å se detaljer.

...of Ground floor 1-bed Studio 42sqm Flat & Split Level 2-bed 80sqm Flat Structural calculations and construction details to be provided. Details of plumbing to be provided. Details of ventilation both mechanical and natural to be provided. Details of Sound insulation between dwellings to be provided. Details of means of escape from dwellings to be provided. Details of fire detection and alarm to be provided. Details of provision for means of access and facilities for disabled people to be provided. Details of electrical and lighting installation to be provided. Details of heating to be provided. Details of provision to show compliance with parts R and S of the building regulations to be provided. Details to show compliance with part L of the building regulations t...

...cycling (Specific to pressure control) Pipe fill - If the system wakes up and pressure is low, pipe fill runs a single pump to gently build pipe pressure and shuts the pump down if unable to build pressure within 10 minutes (Specific to pressure mode) Fault Protection Protection modes - Apply to most protections, and include alarm (alarm only), lockout (alarm and pump shutdown) and inhibit (pump shutdown only, no alarm) High and low level, pressure or temperature protection - Alarm and/or shutdown on high and low level, pressure or temperature depending on the system type, low pressure protection features automatic restart attempts Auxiliary tank level protection - Pump shut-down on supply tank low or destination tank full Maximum run protection - Acti...

Project Title: Technology web site SEO Description: - I am looking for a skilled SEO specialist to optimize my technology website and generate leads. - The primary goal of the website is to generate leads, so the focus will be on attracting potential customers and converting them into leads. - The website is focused on system integration, low current, CCTV, fire alarm, IT network, and PA system technologies. - The industry is highly competitive in terms of SEO, so the ideal candidate should have experience in optimizing websites in competitive industries. - The selected freelancer should have a strong understanding of SEO best practices and be able to implement strategies to improve search engine rankings. - Knowledge of the technology industry and its specific keywords and trends ...

...the following works for us: 1. Design a network of Fire/Smoke Detection system in our company 2. Source to buy the best and certified equipment to make the design installed in place in the company premises 3. Support us in the installation and the test Brief of the requirement: 1. Our company premises contain 6 blocks of Offices + Accommodation room 2. Smoke detector connected to a standalone strobe and siren for each single room. 3. smoke detectors connected to same (1) standalone strobe and siren for each double room. 4. Heat and smoke or combined detectors shall be installed in both dining and kitchen areas 5. Diesel generator and diesel storage tank areas to be protected by fire alarm 6. Possibility of uninterrupted power supply (UPS) to keep fire alarm...

I am looking for a freelancer to create a kitchen box timer that includes both a countdown and interval timer. The ideal candidate should have experience in creating timers with the following features: - Audible alarm: The timer should have an audible alarm to alert the user when the time is up. - Medium size: The timer should be able to fit in the hand for easy handling and portability. Skills and experience required for this project: - Experience in creating timers with audible alarms. - Knowledge of designing and building small electronic devices. If you have the skills and experience required for this project, please submit your proposal.

We are looking for a capable team to deliver a turnkey app made in flutter. The app is a mix between alarm clock, instagram story feed and domotic integration. Stories are fed to the user as a media presentation (pictures, texts, video) making extensive use of animations for all the elements, team should be able to handle very polished app style and animations. App should use firebase ML vision library or similar to detect facial expression from users. We will provide an API for the content feed. There is a requirement to integrate some functions with alexa/google home/home assistant (start routines or get status of a device). Its NOT a front end app, there ar many custom coding requirements both in visual, logic, API and library use. We need a e...

I am looking for a freelancer to help me generate leads for security camera sales and installation and Burglar Alarm installation and monitoring. I have specific criteria for the leads, and my preferred method of contact is through email. This kind of lead generation requires an individual with an in-depth understanding of the choices available on the market and the ability to create campaigns and strategies that will deliver results. Working with the right person will ensure consistent success for my business.

I need someone to create a dataset and an application for a project for car accidents prevention which includes fatigue detection and prevention. The app uses the phone camera and detects fatigue and give alarm in iOS app. Also I will be needing a report on it and specifically on the deep learning and machine learning part which is the most important thing and the real purpose of this project. Project - The project is about real-time driver fatigue detection-based accident prevention system using spatiotemporal machine learning models Deliverables 1. Model, code with explanation 2. Helping me to run on my machine 3. iOS app which I can test 3. Report of the project

...for an experienced electrical engineer to help me with a commercial building project. I need assistance with the power distribution aspect of the construction, and have a rough idea of what the design should look like. The timeframe for the project is within one month. I'm looking for someone with a strong understanding of electrical systems and components, and the ability to provide reliable solutions. The ideal candidate will be knowledgeable on best practices in the industry, as well as industry certifications and have experience with relevant codes and laws. Knowledge of lighting and fire alarm systems would be a plus. I am ready to get started as soon as the right person is found, so if you think you have the skills and experience to complete this project in the...

I need someone to create a dataset and an application for a project for car accidents prevention which includes fatigue detection and prevention. The app uses the phone camera and detects fatigue and give alarm in iOS app. Also I will be needing a report on it and specifically on the deep learning and machine learning part which is the most important thing and the real purpose of this project. Project - The project is about real-time driver fatigue detection-based accident prevention system using spatiotemporal machine learning models Deliverables 1. Model, code with explanation 2. Helping me to run on my machine 3. iOS app which I can test 3. Report of the project

****** Please Read This Project Carefully And Only Respond If you Have Experience With Accelerometers And Fall Detection ************ I am looking for an experienced embedded engineer to create a fall detection algorithm specifically for a personal alarm wristband. The algorithm will need to be implemented using C programming language and fitted into an existing development. Project Requirements: - Develop a fall detection algorithm that can accurately detect specific types of falls on a wristband - The algorithm should provide precise and reliable results for both watch and pendant style wearing. - The embedded engineer should have a strong understanding of sensor data processing and signal analysis - Familiarity with machine learning techniques and algorithms for fall detection ...

I need someone to create a dataset and an application for a project for car accidents prevention which includes fatigue detection and prevention. The app uses the phone camera and detects fatigue and give alarm in iOS app. Also I will be needing a report on it and specifically on the deep learning and machine learning part which is the most important thing and the real purpose of this project. Project - The project is about real-time driver fatigue detection-based accident prevention system using spatiotemporal machine learning models Deliverables 1. Model, code with explanation 2. Helping me to run on my machine 3. iOS app which I can test 3. Report of the project

...make it into the machine. We have a camera system in place that records videos for up to 30 days. Objective: We are seeking a qualified freelancer to develop an object detection system that can analyze the camera footage to ensure that money handed over by the customer ends up in the cash register, and not elsewhere. If the money does not end up in the cash register, the system should send an "alarm" notification, preferably via email. Requirements: Object detection for recognizing money handed from customer to employee. Object detection for recognizing if that same money is placed into the POS machine. A mechanism to alert via email if the money does not end up in the POS machine. A user-friendly interface to access and analyze the results. The ability to work with o...

I need someone to create a dataset and an application for a project for car accidents prevention which includes fatigue detection and prevention. The app uses the phone camera and detects fatigue and give alarm in iOS app. Also I will be needing a report on it and specifically on the deep learning and machine learning part which is the most important thing and the real purpose of this project. Project - The project is about real-time driver fatigue detection-based accident prevention system using spatiotemporal machine learning models Deliverables 1. Model, code with explanation 2. Helping me to run on my machine 3. iOS app which I can test 3. Report of the project

...installation company. we do alarms, cameras, access control and fire alarm. this will be something that is left on the door at a business or home Audience: - The target audience for the flyer is primarily residential and business or corporate individuals. Tone or Style: - The flyer should have a formal and professional tone and style. Skills and Experience: - Graphic design expertise, with a strong portfolio showcasing previous flyer designs. - Proficiency in design software such as Adobe Illustrator or Photoshop. - Attention to detail to ensure the flyer is visually appealing and communicates the desired message effectively. - Understanding of branding and the ability to incorporate business logos and colors into the design. - Excellent communication s...

Vennligst Registrer deg eller Logg inn for å se detaljer.

I am looking for a skilled professional to develop a simple alarm system integrated with IP cameras for fire detection. The ideal candidate will have experience in the following areas: - IP camera integration: The application should seamlessly integrate with IP cameras, allowing for live streaming of camera feeds on the alarm window. - Display IP camera stream: The alarm should be able to display the live stream from the IP cameras. - Call for pre-set: The system should also be able to call for pre-set actions based on the camera SDk/API If you have experience in developing IP camera integration and possess the necessary skills mentioned above, please submit your proposal.

...when the battery temperature is BELOW -20°C or ABOVE 60°C. 5. Each cell is monitored utilizing a unity-gain differential amplifier with the amplifier output going into the PIC16. (PIC 32 or other PIC may be utilized for efficiency of design or code). 6. Each cell will be maintained when 3.45V or above by utilizing trickle charging technique of 20mA charge @ 3.65V. 7. Each cell must be monitored for temperature. If any temperature sensor determines abnormal temperatures, the micro will disconnect the three or four cells from the charging circuit and close an alarm output (relay dry contact, 1A @ 24vdc max current). 8. Once the batteries are disconnected due to low temperature, the cells are permitted to drop to -40°C. Once the enclosure temperature rises to 0&...

...The system shall allow users with appropriate permissions to control PTZ (Pan-Tilt-Zoom) cameras remotely, adjusting camera angles, zoom levels, and focus as needed. 3.6 Video Recording: The VMS shall provide the capability to record video streams from cameras. Users shall be able to initiate manual recording or set up scheduled recordings based on specific time intervals, motion detection, or alarm triggers. 3.7 Playback and Retrieval: The system shall allow users to access recorded video footage for playback. Users shall be able to search for recordings based on date, time, camera, and other relevant parameters. 3.9 Remote Access: The system shall provide secure remote access capabilities, allowing authorized users to access the VMS from remote locations through a web-based ...

I'm looking for a logo designer to create a logo for KPE Alarms that conveys a classic and timeless feel. The logo should be unique, memorable, and professional. Whether you make use of modern symbols, icons, and colors or draw inspiration from more traditional designs, I'm confident you'll help create a log...designs, I'm confident you'll help create a logo that exudes a classic elegance. I'm open to suggestions and ideas so feel free to present new options, but rest assured, I'm looking for a logo that captures a classic sophistication and timeless essence. I'm looking forward to seeing your creativity! We have attached a copy of our logo from a division of this new company Our main business is fire alarm installation and maintenance. As...

...this carefully, do not message me directly with any generic messages if you dont have Asterisk and SCAIP experience. I am in need of an English speaking Asterisk & Kamailio specialist to assist with my project. The specific tasks that I require assistance with include configuring the Asterisk and Kamailio servers and the settings. Specifically we want help in complying with SCAIP (Social Care Alarm Internet Protocol). If you have this experience that is perfect. We already have an Asterisk engineer but he may need some help with interpretation. I already have existing infrastructure in place, so the specialist will be working with that instead of setting up everything from scratch. The expected turnaround time for this project is moderate, ranging from 1 to 2 weeks. Ide...

JOB DESCRIPTION: FIRE ALARM CAD ENGINEER Position Overview: We are NYC based rapidly growing start up Fire Alarm Company, seeking a dynamic and detail-oriented Administrative Assistant to join our team. The successful candidate will play a pivotal role in our operations by accurately analyzing blueprints to perform device counts, inputting data into Excel spreadsheets, and transforming the information into comprehensive proposals. This position requires exceptional organizational skills, strong attention to detail, and the ability to collaborate effectively with our team. The role also encompasses general administrative tasks to support the smooth functioning of the office. Responsibilities: Blue Print Device Take Off: Review blueprints and construction documents to extr...

JOB DESCRIPTION: ADMINISTRATIVE ASSISTANT Position Overview: We are NYC based rapidly growing start up Fire Alarm Company, seeking a dynamic and detail-oriented Administrative Assistant to join our team. The successful candidate will play a pivotal role in our operations by accurately analyzing blueprints to perform device counts, inputting data into Excel spreadsheets, and transforming the information into comprehensive proposals. This position requires exceptional organizational skills, strong attention to detail, and the ability to collaborate effectively with our team. The role also encompasses general administrative tasks to support the smooth functioning of the office. Responsibilities: Blue Print Device Take Off: Review blueprints and construction documents to extract re...

As a truck driver, you need to know when your tail gate or lift is open. This tail gate / lift open sensor is designed to alert you in an audible way with an alarm when there is a tail gate or lift open. This way, you know immediately when the tail gate or lift is left open without having to remember to check it. The tail gate / lift open sensor is for an individual truck and can be used on any type of vehicle. The preferred method of notification is an audible alarm, so you know immediately when the tail gate or lift is open.

...ensuring compliance with fire safety regulations - The fire risk assessment should cover all aspects of fire safety, including fire prevention measures, detection systems, evacuation plans, and emergency response procedures - The fire engineer should provide a detailed report after the assessment, highlighting potential fire hazards, recommended improvements, and any necessary fire protection system design changes - The report should include a summary of findings, prioritized recommendations, and cost estimates for implementing the suggested improvements - The fire engineer should have knowledge of residential fire safety standards and be able to provide tailored fire safety training to homeowners and residents, if required. I'm requiring some services for a new residential...

Hi i want a simple webserver on my esp32 that i can plug my temp probe into and also a water level sensor, I can then log in from my phone to the server and set the alarm notification. So when it gets to a temp and stays within 1-2 degrees for more then 3 mins it alarms me staying ready. I set the range like 70-75 c. if it goes higher or lower than that for more than 1mins it notifies me, High or low temp When the water level sensor is triggered it tells me - Bottle full

Thanks for doing this project. Name of the APP : Phone Tracker +: Real-Time GPS Developer Corporation is : VeryPlugApps What is expected for delivery : - 1 App Icon ratio 512w*512h in PNG and JPG - (SVG if possible) - 1 App Presentation Banner for Marketing and Branding ratio 1024w*500h in PNG and JPG (this is the first picture they see usually) -"Phone Tracker +: Real-Time GPS For Free" -Put a "24/7 Uptime Guaranteed" Badge Somewhere -Put a "Privacy Guaranteed" Badge Somewhere -Put a "Kids Safe" Badge Somewhere -Put a "No account needed" phrase somewhere -You have to use the color set in description -You have to use the font set in description - 5 to 7 banners with ratio 9w:16h in PNG and JPG for sm...

Project Description: UCA Logo Design I am looking for a skilled designer to create a new professional logo for our organization, UCA United Citizens Alarm The logo should have a symbolic style and should primarily serve the purpose of identification. Requirements: - The logo should incorporate bold and vibrant colors to make it visually appealing and attention-grabbing. - We need a logo sheet with 1-3 ton colors to provide versatility and flexibility in its usage. - Our current logo is very basic, so we are seeking a fresh and innovative design that reflects our brand identity. Ideal Skills and Experience: - Proven experience in creating visually striking and symbolic logos. - Strong understanding of color theory and ability to create bold and vibrant color schemes...

Our security company is boon security. We are looking for logo design ideas. Attached are 2 inspiration pics of logos. We design sell and install alarm systems. Keycard access systems cameras systems.

Focusing 2 persons in crowd (train/bus/ supermarket). Person-2 in back is pickpocketer and picks the valet from Person-1 in front and because of the small device (details will be provided later) attached to the Person-1's trouser theft alarm goes on. So, pick pocketer gets caught. More details: What style of animation are you looking for? Realistic What is the duration of the animation? 1-3 minutes How soon do you need your project completed? ASAP

I have a raspberry Pi that I would like to control a smart lamp using SK6812 RGBW leds. I have a script that is checking my...that I would like to control a smart lamp using SK6812 RGBW leds. I have a script that is checking my google calendar looking for events with a reminder set and this is working. What I need is the correct modules to run the LEDs installed and the script modified to slowly turn the lamp to full brightness over 30 min before an event starts. (led count is 61 and connected to GPIO 18) I also have an alarm buzzer connected to GPIO 23 which needs to sound at the event time and beep until a stop command is provided by a 433mhz receiver connected to GPIO 24. This is the reciever:

I am looking for a CCTV surveillance software system that supports motion detection and is compatible with both IP and Analog Cameras. In addition, it must have the ability to integrate with alarm systems. No other features are necessary. The software should be intuitive and easy-to-use, and able to manage multiple different types of cameras from one interface. It must also be secure and reliable. I expect it to provide accurate real-time alerts related to incidents captured on camera. Lastly, it should be compatible with major operating systems and have reasonable pricing options. Thank you for your bid!

...safety regulations. Scope: - The review will focus on the exhibition space where we are intending to bring in some welding robots. I am attaching a scope of work for the fit-out of this building, where we are intending to get : A weld blanket over the robotic welding machine at ceiling level Extract ducts to extract welding fumes – this is not a regulated fire or smoke extract system. A fire alarm break glass unit A fire warden with handheld fire extinguisher There is an existing fire hose positioned in the space. We are currently in the process of getting a technical note prepared by a fire engineer / spcialist who will review our principal architectural drawings/sketches and provide a fire strategy on : » Means of Escape/Egress » Internal Spread of ...

I am looking for an experienced iOS developer to create an app 1-2 screen that plays a custom alarm notification sound for a duration of 3 minutes. This is for personal use so no need to be on app store but you may need to help to install on xcode to iOS device in case if there is any issue. Requirements: - The app should allow me to use a custom sound file for the alarm notification. - I will provide the custom sound file to be used. - The app should include a snooze option, allowing the user to delay the alarm for a specified period of time. Ideal skills and experience: - Proficiency in iOS app development using Swift. - Experience working with audio files and notifications in iOS. - Knowledge of implementing snooze functionali...

I am looking to integrate mqtt alarms into my system, and would like the help of an experienced professional. The platform that I am working on is "Other (please specify)" and I have specific requirements for the alarm triggers. I expect the response time of the alarms to be immediate. My ideal freelancer will have a solid understanding of mqtt technology and experience integrating it with a range of platforms such as Arduino, Raspberry Pi, and others. They should be comfortable configuring alarm triggers according to exact specifications as well as ensuring an immediate response for all alarms. If you believe you are the right candidate for this project, please don't hesitate to get in touch.

9) Alarm & Building Management System Design a monitoring and control system for a building, with the following specifications: • 6 door/window alarms• 1 code-access entry door, door only opens when the correct code provided [user-input]• users cannot enter the building if they are already in it, or leave if they are outside • local alarm system (output to a flashing LED) • able to call security (output to another flashing LED and serial output) • alarm system activated and deactivated using user input code [serial input] • emergency button triggers local and security alarms• temperature and humidity of 2 production rooms are recorded every [user-input] min • high / low temperature ([user-input]C and [user-input...

...required (Can turn on and off at the app level - will require SDK) - Connect through the API to collect: * Sleep Data from API (REM, Normal etc) and time of sleep.   * Need to pull data on whether the device is online and connected (watch to phone and phone to network).  * Last Contacted (Perhaps ever 10 minutes) * Need to pull data on whether the device is on the wrist or not (Perhaps every 10 minutes) * Need to pull data on whether the device is on charge or not (perhaps every 10 minutes) * Need to pull data on whether the device is low on battery (10%) perhaps check every 30 Minutes * Allow access to GPS data - either from phone or watch, ideally watch * Allow the user to press and hold any button the watch which is held, will trigger an alarm...

...service using the number of daily steps **Device you are using** - Mobile App (Android, ios) **Using environment** - react-native **Service structure** - Provide service through react webview in react native - Provide data about step counter from react native to react webview - past steps - Today's step count - Step count increasing in real time **Requirements** - You can measure the number of steps taken today. - You can measure the increase in the number of steps in real time. - You can reset the step count every midnight and re-measure it. - Even if the app is not turned on, the number of steps can be initialized at midnight and counted from the beginning. - Even if you do not use the app for a long time (eg, 7 days), you can...

...small application which detects every <configurable> ms a certain noise threshold and if detected, analyse that noise. Goal is the acoustical detection of as many as possible smoke detectors in the room. Unfortunalety, these systems are only standardized in terms of loudness, but not in the used frequencies and noise patterns. A good overview is here: These detectors shall be supported. We need the code in C++, external libs may be used but in this case we need to know lib details (license, etc.). The code shall be written in a way, that we might easily add new smoke detectors / patterns to the list of devices. Budget to be discussed....

please submit your request indicating how much time you need to develop the AWS Fargate service using the AWS CDK (TypeScript) Please note: My budget for this project is a maximum of...comments. your AWS CDK TypeScript, must contain: --> task definition --> create target group. --> Create a Service AutoScaling Polices --> Create Load Balancer (networking choose 3 availability zones in your vpc.) --> Create security group (Enter name and descritpion and add inbound rule) --> Create a cluster service ( clear part to define the "desired number of Tasks") --> Create a CloudWatch alarm and send an SNS notification to an email. (have to have a places to set up the email to get the notification.) please see manual guide. (when you get the job. ) My budge...

I'm looking for a IOT door alarm and log system. I need an door magnetic sensor connected to an IOT device for with Sound Alarm, SMS & log tracking. Additionally, I have specific requirements for the system. It must be wired via ethernet, and transfer the same to a remote file/database. I'm looking for a reliable system that would be able to meet my needs. I can buy the hardware. Looking for a someone to suggest appropriate hardware and provide me the program.

Hi Miftahul Arrijal R., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

I am looking for a skilled developer to create an indoor tracking app using GPS. The app needs to track in real-time and provide a high level of accuracy, within a few meters. Skills and Experience Required: - Proficiency in GPS or Bluetooth or Wi-fi tracking technology - Experience in developing real-time tracking applications - Strong knowledge of indoor positioning systems and algorithms - Familiarity with mobile app development for both iOS and Android platforms - Ability to optimize battery usage for continuous tracking - Knowledge of data encryption and security measures to protect user privacy -There should be an admin panel that should have a general overview of all users, individual user tracking and alarm system when user go out of the allocated zone...

I am looking for security products with specific features to protect my business premises. My goal is to improve my perimeter protection with the installation of surveillance cameras, alarm systems, and access control systems. I have specific features in mind, and I am looking for a provider who can provide me with the best options for achieving my goals. My scope of installation will only cover some parts of the building and not the entire building or individual floors.

I am looking to develop a flashing alarm circuit that has Wi-Fi, SMS and email notifications with a range of more than 500 feet. I am open to suggestions when it comes to specific requirements, but I would like the circuit to provide Wi-Fi, SMS and email notifications to alert users. I would also like the range of the Wi-Fi and cell notifications to reach more than 500 feet. With this system, I can be sure that the notifications reach the intended recipients in time.

...simple Bluetooth printing app. The app needs to be compatible with thermal printer called star micronics tsp650ii bluetooth. Requirements: - The app should be able to handle text-based documents, specifically the latest order from the WooCommerce REST API. - The app should be able to print order details such as customer name and order items and times and dates, prices. Ideal Skills and Experience: - Strong knowledge and experience in Android development. - Familiarity with Bluetooth printing technology. - Experience working with REST APIs, specifically WooCommerce REST API. - Ability to handle text-based documents and extract relevant information for printing. The app must ALWAYS print latest ordre and MUST give an alarm when a new ordre com...

I am looking to develop an indoor tracker app for mobile devices and a website platform. The app will feature GPS tracking, or bluetooth and wifi tracking, indoor mapping and user profiles for authentication purposes. The app will show realtime location of users on a website and will show zones they are assigned to. If user leaves zone it will trigger alarm and notify admins. The interface should be available for both mobile and website platforms, and the app must be secure even though I don't have any specific security requirements.

Use an Arduino Board to read temperature and Humidity Values from a DHT22 sensor Communicate Temperature and Humidity values to a master over RS485 Drive an LCD display with values for Temperature & Humidity Receive values for MinT, MaxT, MinRH, Max RH from master and display on LCD If actual T or RH breach the Min/max range, then activate a 12VDC output Multiple Arduino boards should be able to be communicate with One Master See detailed document as attached Skills and Experience: - RS485 - Modbus - LED/LCD - Arduino - DHT22 - DS18B20 If you have the skills and experience required for this project, please submit your proposal.