Find Jobs
Hire Freelancers

Arduino GPS Speedometer Odometer LED display

$250-750 AUD

Pågår
Lagt ut over 5 år siden

$250-750 AUD

Betalt ved levering
Arduino with GPS speedometer and odometer with a LED display to be used for land speed racing. Project is for DESIGN, BUILD AND SHIPPING OF 2 UNITS. Continuous display of speed from 0-500+ mph: 3 digit speed display with 1 mph increments. Continuous display of straight line distance from origin: 0.0 to 9.9 miles maximum distance. 2 digit display with 0.1 mile increments. Maximum speed is retrieved by a push button (Hold to display) Origin and peak speed reset by another push button (Hold 10 seconds to reset) Change display units from Miles per hour to Kilometers per hour by holding both buttons for 10 seconds. Acceleration is 0 to 500 mph in 60 seconds. Display of speed and distance needs to keep up with minimal latency and be stable to read easily with no rapid flickering (estimate 0.7 second display refresh). Display numbers must be at least 50mm tall and visible in bright daylight. Display will fit into an instrument panel. Preferred display is 7 segment LED but open to alternatives. The driver will be wearing polarised sunglasses so LCD displays may not work. 11 - 14 volt DC powered. All LEDs light up for 10 seconds when powered on to check function. I need 2 units constructed. Components can be loose. I will make the enclosure and mounting hardware. I have CNC machining capability. Documentation required: I need a list of components, supplier details and price. Also program code and PCB files for editing. The GPS receiver must be fast and accurate for speed calculation. Hardware must be very reliable and able to work in high vibration environment with temperatures up to 40 deg C. All of the hardware must be grouped with the 3 digit speed display. A 700mm cable connects this to the 2 digit odometer display. A 180mm cable connects to the buttons. The assembly should also be able to work with the odometer display disconnected. From the front view, none of the hardware should extend beyond the LED display. The GPS receiver can be remote mounted. Let me know if more information is required or if you have alternative suggestions. Videos of similar function GPS Arduino Speedometers: [login to view URL] [login to view URL] This is the preferred display: Green LED is brightest, but open to alternative displays: [login to view URL],searchweb201602_5_10152_10151_10065_10344_10068_10130_10342_10547_10325_10343_10546_10340_10548_10341_5012515_10696_5012615_10084_10083_10618_10307_10131_10132_10133_10059_100031_10103_10624_10623_10622_10621_10620,searchweb201603_51,ppcSwitch_5&algo_expid=302c85b9-11f9-412c-9930-5cd23d55eb6a-2&algo_pvid=302c85b9-11f9-412c-9930-5cd23d55eb6a&priceBeautifyAB=0 preferred push buttons: [login to view URL] Please note: any bids which do not include build costs and delivery to Sydney, Australia will not be considered. regards and thank you.
Prosjekt-ID: 17681043

Om prosjektet

21 forslag
Eksternt prosjekt
Aktiv 6 år siden

Ønsker du å tjene penger?

Fordeler med budgivning på Freelancer

Angi budsjettet og tidsrammen
Få betalt for arbeidet ditt
Skisser forslaget ditt
Det er gratis å registrere seg og by på jobber
Tildelt til:
Brukeravatar
$750 AUD om 30 dager
5,0 (25 omtaler)
4,9
4,9
21 frilansere byr i gjennomsnitt $1 153 AUD for denne jobben
Brukeravatar
Hi there i have made my bid and i can complete this project perfectly inbox me for further details Regards!!
$5 555 AUD om 35 dager
5,0 (77 omtaler)
7,3
7,3
Brukeravatar
Hi good day very high skill in RF Senior ENGINEER has more of 40 years’ experience in this profession, developing Hardware and Software Expertise in video processing and associated simulation and evaluation tools and methods, communication I2C, I2S, SATA, RS232, RS422, RS485, USB, TCP, Bluetooth, RF433, Wi-fi, GSM, GPS, GPRS and any other serial communication. Producing Analog/Digital board designs, layouts and modifications or any other multi-layer PCB design, Verifying designs and layouts. See Portfolio for samples of works. Preparing documentation for manufacturing. Gerber, Bom, 3D model Contact with partner in China for make PCB in 32 layers Design in Any CAD, Allegro, Altium, Orcad, Eagle, and other. Developing board layout including 3D model, size, performance, power consumption, and cost. Developing software for any microcontroller or microprocesor in C, C++, Basic, Assembler, compiler Keil, IAR, and other. SKILL Strong Hardware Design Skills, Analogue/Digital Video Audio and Power signals, communication signals OrCAD/ Protel / Altium/ Mentor Graphic / Eagle and similar PCB include 3D Model Design/Applications, Embedded Software Programming Assembler (C, C++) and Visual Basic, Full understanding of Micro-controllers, and microprocessor Hardware Engineering Fundamentals and Hardware Specifications, Attention to Detail Programming in Assembler for any microcontroller or Microprocessor
$2 777 AUD om 10 dager
4,9 (52 omtaler)
6,4
6,4
Brukeravatar
Hi, I have built similar projects , several times in 19 years . Please check my profile. Please send me a message so that I can ask questions. I don't think your hardware this way can give expected results. btw. I built a project for boat racing also, it is in my completed projects list.
$998 AUD om 10 dager
4,6 (16 omtaler)
6,4
6,4
Brukeravatar
Easy, can design it in a day. I designed and created prototypes for many gps based devices.. how about using an LCD instead of the LED?
$1 666 AUD om 100 dager
4,8 (2 omtaler)
5,5
5,5
Brukeravatar
hi how are you i have good experience in this field and i can handle your work, kindly text me so that we can further discuss the work. thanks
$555 AUD om 10 dager
4,7 (24 omtaler)
5,3
5,3
Brukeravatar
Hello I have got your job posting “Arduino GPS Speedometer Odometer LED display” and I am very much interested to work in your project. I am a circuit designer and have more than 5 years experience of working with the Analog/Digital Electronics embedded systems(Arduino,Rasberry pi ,ARM processors ,PIC microcontrollers,Wireless boards,TFT Touch Displays,All types of sensors and actuators). i have done tons of similar projects So, I think you’ll find that, I have the skills you’re looking for. For more on my skills and successfully finished projects, please have a look on my Profile and Portfolio. I have all the components available here with me so i will develop a working prototype according to your specifications and then send you the code and schematics so things will work for sure.I will remotely guide you and help you build the system on your side. I am always available on Email and Skype. Please have a voice or video chat if necessary. I shall be available round the clock and able to start your project as soon as possible according to you. Thank you for your consideration, Best Regards, Haseeb Shafqat
$750 AUD om 15 dager
4,7 (41 omtaler)
5,6
5,6
Brukeravatar
$800 my work about $150 for parts about $50 shipping and packaging website charge $112 total $1112 u getting two PCB with component on
$1 111 AUD om 15 dager
5,0 (9 omtaler)
4,3
4,3
Brukeravatar
Hi there,me and my husband are electronic enginees, And we are quiet Experienced with High Speed PCB Design and Implementation. And experts in Eagle CAD,and Altium Designer. Can you please send me a message,So we can discuss more about the project? I can design your PCB Perfectly and send you the files ready to manufacture the Boards for the GPS Speedometer Design is a huge part of my life and I work hard to produce the highest quality, effective, innovative, timeless, designs that my clients will love and I would love to work with you!! :) Thank you
$1 500 AUD om 10 dager
4,9 (11 omtaler)
4,0
4,0
Brukeravatar
Expertise in Arduino with a substantial background in embedded systems and electronics I have completed various protects related this field as you can view my profile for completed projects. I can provide you your complete task in decided time frame with quality work. We can discuss further details in the message box Regards
$700 AUD om 10 dager
5,0 (10 omtaler)
3,5
3,5
Brukeravatar
Buddy,,How r u?I will build and send u the complete prototype in 250 AUD to sydney. I did the same project for bike,,,i will make changes in it to fit ur requirements, U will feel brotherhood....We usedn= nextion oled in our project...thanx
$250 AUD om 10 dager
4,6 (24 omtaler)
4,0
4,0
Brukeravatar
I've experience in prototyping products with multiple functionalities as I've done this before in many projects. I've dealt also with different versions of UBLOX GPS before in two projects and I know their interface and message parsing using arduino and atmel microcontrollers. Check my portfolio for my previous projects and we can discuss the price details on chat.
$777 AUD om 5 dager
5,0 (5 omtaler)
3,2
3,2
Brukeravatar
I had experience in Led segments interfacing and automotive domain knowledge. I can do your project.
$616 AUD om 20 dager
5,0 (1 omtale)
0,0
0,0
Brukeravatar
I can complete it within a week. But shipping may take some time which I cannot assure. If you are interested come to the chat.
$750 AUD om 5 dager
0,0 (0 omtaler)
0,0
0,0
Brukeravatar
i am an electronics engineer. i will try to do this, i am familier with arduino and related instruments.
$833 AUD om 10 dager
0,0 (0 omtaler)
0,0
0,0
Brukeravatar
hi, I have done similar boards and delivered to my customers with quality. For quality deliverables, the price mentioned by me is reasonable.
$1 244 AUD om 25 dager
0,0 (0 omtaler)
0,0
0,0

Om klienten

AUSTRALIAs flagg
Kingsgrove, Australia
5,0
1
Betalingsmetode bekreftet
Medlem siden aug. 25, 2018

Klientbekreftelse

Takk! Vi har sendt deg en lenke for at du skal kunne kreve din gratis kreditt.
Noe gikk galt. Vær så snill, prøv på nytt.
Registrerte brukere Publiserte jobber
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Forhåndsvisning innlasting
Tillatelse gitt for geolokalisering.
Påloggingsøkten din er utløpt og du har blitt logget ut. Logg på igjen.