Mininet vlan jobber

I am looking for someone to help create a network project simulation on Cisco Packet Tracer. Specifically, I need a simulation of routing and switching, VLAN configuration, and network security. The network topology should follow a specific one that I will provide. Additionally, the simulation should include more than 10 devices. The task needs to be done completely in Cisco Packet Tracer and must support both IPv4 and IPv6 connectivity. The person I choose should have a good understanding of network topology design and be able to properly set up the network with the devices I provide.

I am looking for a network setup expert who can assist me in troubleshooting my small-scale Local Area Network (LAN) setup for Hp arubra switches. The ideal candidate should have experience in troubleshooting network setups and be familiar with Hp arubra switches. This project requires the following skills and experience: - Expertise in troubleshooting network setups - Knowledge of Hp arubra switches - Ability to diagnose and resolve network connectivity issues - Familiarity with LAN configurations and protocols - Strong problem-solving skills and attention to detail If you have the necessary skills and experience, please submit your proposal with relevant examples of your past work.

I am looking for a freelancer to help with my Cisco Config project. The ideal candidate should have experience in configuring Cisco devices, specifically firewalls. Specific requirements for this project include: - VLAN configuration: I need assistance in setting up VLANs on the Cisco device. - General idea of the Cisco device model: While I don't have a specific model in mind, I have a general idea of what I am looking for. - Basic network setup: The freelancer should have experience in setting up basic network configurations. - Security settings: Knowledge of security settings on Cisco devices is required. If you have experience in Cisco device configuration, particularly with VLANs and firewalls, please reach out to discuss further details.

...level knowledge in SDN and Honeypot is required. - Experience with Openflow and Python scripting is necessary. Timeline: - The project should be completed within 1 month. If you have the required skills and expertise, and can deliver the project within the specified timeline, please submit your proposal. Below is a Summary of the targets to be achieved: 1. The project needs to be emulated on Mininet 2. The purpose of the project is to use the concept of Moving target defense and Software define networking to prevent cyber attack on an infrastructure 3. Network devices in the infrastructure are Openflow 4. The concept of the project is that the controller ( Ruy or Floodlight controller ) should send script that would change the Ip address of the Router and map the existing ...

I am looking for a freelancer to develop a Moving Target Defence system using SDN and Honeypot. The desired outcome of this project is improved detection and prevention of cyber attacks. Development of codes needs to be in python and code line needs to have comment Preferred Platform: - The preferred platform for the SDN is OpenFlow. The Emulation needs to be performed on Mininet Required Experience: - I am looking for a freelancer with intermediate level of experience in SDN and honeypot technology. Skills and Experience: - Experience in developing Moving Target Defence systems using SDN and Honeypot - Proficiency in OpenFlow platform - Intermediate level knowledge in SDN and honeypot technology If you have the required skills and experience, please submit your proposal.

...network infrastructure. - The expected timeline for this project is 1-2 weeks. NOTES for routers: - Dual BGP configuration for ISP High availably, dual routers and dual switches. - Zero point of failure design. - Auto Failover in case of any upstream or hardware failure. NOTES for Switches: -High availably switches configuration 2X 1GB for Internet - 2X 1GB for internal - 2X 40GB for storage. -Vlan for diffrent networks. -Jumbo frame for 40GB switches. VERY IMPORTANT: we need low level and High level documentation and diagrams. also we are looking support for monthly basis for maintenance or configuration changes. Switches and routers Models: 2X CISCO ASR1001-X 2X Cisco Nexus 93180LC-EX 40G 4X Cisco Nexus Cisco N3K-C3048TP-1GE If you have the skills and experience in ad...

...python and code line needs to have comment Preferred Platform: - The preferred platform for the SDN is OpenFlow. The Emulation needs to be performed on Mininet Required Experience: - I am looking for a freelancer with intermediate level of experience in SDN and honeypot technology. Skills and Experience: - Experience in developing Moving Target Defence systems using SDN and Honeypot - Proficiency in OpenFlow platform - Intermediate level knowledge in SDN and honeypot technology If you have the required skills and experience, please submit your proposal. Below is a summary of target to be achieved: 1. The project needs to be emulated on Mininet 2. The purpose of the project is to use the concept of Moving target defence and Software define networking to prevent cyber...

I am looking for a freelancer who can help me with an issue I am experiencing with Proxmox SDN and QINQ 802.1q. The specific problem I am facing is that the VLAN tags are not being recognized. A identical Cluster is not having this issue Skills and Experience: - Strong knowledge and experience with Proxmox SDN and QINQ 802.1q - Expertise in troubleshooting VLAN connectivity issues - Familiarity with different versions of Proxmox, including the version I am using (which is not specified) - Ability to upgrade or downgrade Proxmox versions to resolve the issue I have already tried reconfiguring the VLAN settings, but it did not solve the problem. Therefore, I am open to upgrading or downgrading the Proxmox version in an attempt to fix the issue. If you have experien...

I need help with a configuration related to Aruba 8320 switches, i have configured VSX between 2 switches and MC-LAG, now i have configured bond interface on a Linux box and not getting required throughput along with redundancy when i restart switch1, but there is packet loss which it shouldn't because of MC-LAG and VSX. There is a PXE,TFTP,DHCP server running and on the same VLAN when and server cannot boot when LAG is configured, when i removed the LAG server can work boot from PXE and so on. I would like to have some someone to troubleshoot this with me and get this working.

Hello! I am in need of assistance for configuring a vlan on my network. I am using a Firewall as my network equipment and have Administrative access to it. The network is fully configured, but the configuration is incorrect. As such, I require someone experienced to help me reconfigure it correctly in order to set up the vlan. With your help, we can get the vlan configured properly so that my network runs as efficiently as possible. Thanks in advance!

...impacting our WiFi and RDP connections severely, making them barely usable. Our technology stack comprises 24 UniFi switches, an Untangle Firewall, Extreme Networks WiFi access points, and operates over 7 VLANs. Tasks: - Diagnose the root cause of the network disconnections and instability. - Inspect and troubleshoot Spanning Tree Protocol (STP) configurations across the UniFi switches. - Review VLAN configurations and ensure they are correctly set up. - Recommend and implement solutions to resolve the network instability. - Provide a clear communication channel for real-time updates on the troubleshooting process. Qualifications: - Proven experience in network troubleshooting, especially in environments with UniFi switches, Untangle Firewalls, and Extreme Networks WiFi acces...

...impacting our WiFi and RDP connections severely, making them barely usable. Our technology stack comprises 24 UniFi switches, an Untangle Firewall, Extreme Networks WiFi access points, and operates over 7 VLANs. Tasks: - Diagnose the root cause of the network disconnections and instability. - Inspect and troubleshoot Spanning Tree Protocol (STP) configurations across the UniFi switches. - Review VLAN configurations and ensure they are correctly set up. - Recommend and implement solutions to resolve the network instability. - Provide a clear communication channel for real-time updates on the troubleshooting process. Qualifications: - Proven experience in network troubleshooting, especially in environments with UniFi switches, Untangle Firewalls, and Extreme Networks WiFi acces...

I'm looking for an experienced professional to help set up a SonicWall firewall for more than 50 devices. The ideal candidate will possess the necessary technical expertise to consult on and properly configure and setup my FIREWALL, 2 WAN with load balancing, NAT for 4, Vlan or 2 department interfaces. Additionally, the person will be responsible for making any necessary repairs and updates in order to ensure the protection of my network. Finally, I'm looking for someone who is customer-oriented, with excellent communication skills. This is a great opportunity for an individual or organization who is an expert in firewall technology and setup.

...of our Aruba Instant on system. The main focus of this project is to set up 2 WLAN SSIDs with high-speed connectivity. On the Switch we have Trunk Port with 2 VLAN 11 and 15. And we need to configurate the new Aruba Instant ON with these 2 VLANS. 11 for Office and 15 for Guest. Specific requirements for this project include: - Configuring the Aruba Instant on system to support 2 WLAN SSIDs - Implementing high-speed connectivity for optimal performance - Ensuring seamless integration with our existing hardware Ideal skills and experience for this job: - Proficiency in Aruba Instant on setup and configuration - Strong knowledge of VLAN Layer 2 Switches - Experience in setting up and managing WLAN SSIDs - Familiarity with optimizing network performance for high-speed conne...

...of our Aruba Instant on system. The main focus of this project is to set up 2 WLAN SSIDs with high-speed connectivity. On the Switch we have Trunk Port with 2 VLAN 11 and 15. And we need to configurate the new Aruba Instant ON with these 2 VLANS. 11 for Office and 15 for Guest. Specific requirements for this project include: - Configuring the Aruba Instant on system to support 2 WLAN SSIDs - Implementing high-speed connectivity for optimal performance - Ensuring seamless integration with our existing hardware Ideal skills and experience for this job: - Proficiency in Aruba Instant on setup and configuration - Strong knowledge of VLAN Layer 2 Switches - Experience in setting up and managing WLAN SSIDs - Familiarity with optimizing network performance for high-speed conne...

I am looking for a skilled developer who can convert a Mininet py file to make it work in Miniedit. The ideal candidate should have experience with Mininet and Miniedit and be familiar with the specific changes required to make the conversion. The project needs to be completed within a short timeframe. Requirements: - Experience with Mininet and Miniedit - Knowledge of Python programming - Ability to make necessary changes to the Mininet py file - Understanding of network simulation and virtualization - Strong problem-solving skills - Ability to meet tight deadlines If you have the necessary skills and can complete the project within a short timeframe, please submit your proposal.

...methods for it and a api call for downloading backup MS2: - CRUDing routes MS3: - CRUDing firewall rules and aliases MS4: - CRUDING interfaces VIP & VLAN Implementations: - a Interface representing the above methods - the impl of the interface - the DTOs are hardcoded examples in multiple JUnit tests, so that the JUnit tests is basically your "main" method replacement with multiple entry points NO UI for now required! NO database required! No REST endpoint exposing for the above named

Project Description: I am looking for a freelancer who can fix and setup IPv6 vlan in CentOS. I have root access to the CentOS server and my current network configuration is a single network. The specific issue that I am experiencing with the IPv6 vlan is that it is not working at all. Ideal Skills and Experience: - Strong knowledge and experience with CentOS server administration - Expertise in IPv6 vlan configuration and troubleshooting - Familiarity with networking protocols and concepts - Ability to identify and resolve connectivity issues - Excellent problem-solving skills and attention to detail

...reception. Connection and integrate the satellite dish with the data center infrastructure. Server Installation: Mounting and install 8 servers in designated racks. Properly manage and label cables for easy identification and troubleshooting. Verify proper power and network connectivity for each server. Switch Installation: Install and configure 2 switches in the specified rack. Ensure proper STACK, VLAN configuration and integration with existing network infrastructure. Test for network functionality and stability. Decoder Installation and Setup: Install the decoder in the designated location. Connect the decoder to the satellite dish and integrate with the data center infrastructure. Configure and test to ensure optimal performance and compatibility. Documentation & Reporti...

...router. 5. Proper routing of cables and labelling equipment/cables. 6. NTT Global Networks Engineer will be on call with your engineer and he will help your engineer to complete the activity. 7. Engineer to share post install pics, Site Visit Report with NTT Global Networks after completion of the activity. Person's laptop OS should either be Windows 10 Professional or Enterprise version with Vlan settings enabled. The engineer must also carry along a labelling machine. ...

...programming concepts. If you have a strong background in PowerShell scripting and are comfortable with high complexity projects, please submit your proposal. Brief examples of the scripts include; 1) Connect to VMware vsphere, check network switches (both dvswitch and vswitch) used within VM's, export all this data to daily data extraction file, find any VLAN ids "100", find any Network name containing name of "Corp", track changes to VLAN id. Provide log file of script execution progress and keep appending to this file and a report file within Excel and HTML format to display this data. 2) Licensing Usage. Provide log file of script execution progress and keep appending to this file and a report file within Excel and HTML format to display th...

having an hetzner server with vmware ESXi 8.0u1a installed. VMs running fine network packages are travelling through vm-guest on vmware to other hosts on hetzner-vlan (external servers) but reply packets never reach the vm on the esxi you have to be master of vmware, hetzner, vlan & networking

...application should be able to perform general conversation with the user. 2. The chatbot should save the user input in a file (txt or xls) and should scan for keywords. 3. The keyword is provided, if identified in the input file, then the number of times the keyword has to be called should be identified. For example, if user inputs - "Create 50 vlans starting from vlan id 200" - In this statement, vlan is the keyword, 50 is the number of times vlan has to be created, and 200 is the the start id of that object, and 249 is the end id of the object. Here keyword to object mapping is 1:1. The number of times the object is called, and the id of the object has to be sent as key value pair. 4. A pre-defined set of Terraform codes are created. Based on the user in...

Hola. Trabajo en una o...Se espera que las propuestas incluyan diagrama de red con los equipos sugeridos. Consideraciones generales: - En total, la cantidad de equipos a remplazar son: 3 switches y 12 APs. - Los APs están alimentados mediante PoE. - Actualmente no hay ruteo dinámico. - El control y salida a Internet es provisto por 1 firewall. Este no se requiere remplazar. - Se manejan actualmente 2 VLAN (trabajo e invitados). Estas VLAN no se ven entre si, pero las dos tienen internet por el mismo firewall. - La conexión a la red WiFi es por medio de contraseña compartida (pre-shared key). - A la red WiFi se conectan sistemas Windows, Mac y Android. La distribución de los equipos se muestra en la imagen anexa. Estoy abierto a brindar...

Configurar red omada de TP link. Se adjuntarian credenciales y seria necesario configurar 4 VLANS. Configurar 2 redes inalambricas con estas. Y ademas necesitaria luego seleccionar desde la boca del switch a que vlan pertenece ese puerto, con el fin de que una red inalambrica del tipo "Empleados" pueda estar en la misma VLAN que un puerto del switch. La infraestructura cuenta de lo siguiente ya configurado con la cuenta omada: Router ER706 2 Switch TL-SG3452XP 2 EAP (670/650)

I am looking for a software developer who can create a simple software for subneting and vlan allocation. The ideal candidate should have experience in developing software for Windows operating system with a graphical user interface. The main feature of the software should be subnet and vlan allocation.

need to connect VLAN across with head office and remote branch.

Setting up VLAN, subnet masks, network security protocols and best practices

I am looking for a freelancer who can help me set up a Virtual Local Area Network (VLAN) using Cisco Switch. I do not require any firewalling solutions for this project. Skills and Experience: - Experience in setting up VLANs using Cisco software - Knowledge of network configurations and routing protocols - Familiarity with ESXI Server for virtualization purposes We need Help in Cisco Area to create 6 VLANs and the correct routing for Opnsense and ESXI. Opnsense and Esxi are set up, only the Cisco switch configuration is still missing.

FortiGate Vlan - I am in need of a skilled professional who can set up a FortiGate Vlan to Siptrcunk - The VPN connection required is IPSec - The remote site is domestic - I require multiple concurrent VPN tunnels, specifically more than 10 - The ideal candidate should have experience in configuring FortiGate firewalls and setting up IPSec VPN connections - Knowledge of network security protocols and best practices is necessary for this project.

Hello everyone, im about to start installing Wireless antennas in order to sell internet. The project will be made after one month and we are at the paperwork at this m...will be one main line and one as Failover line 4) It is neede to setup Wireguard VPN tunel to the key given. 5) make all the setups and the packages at the UISP Cloud at the setup there will be a Tiny pc connected that can have windows or linux in order to make the logging and to have remote access to the network. At the setup of the router of the Client can make the connections with PPPoE or Vlan its your desision with the best option in order to have safe network AND MOST IMPORTANT IS TO BE AVILABLE SO IF I NEED SOMETHING IN THE FUTURE TO HAVE YOUR SUPPORT https://ispdesign.ui.com/#p=fa4f941bc7744585844250...

...150mbps $250 - The form should then create a new RADIUS user that gets tied into an available VLAN in our pool of available VLANS. -- We have a list of available VLANS that can be assigned to customers as they sign up. - We have 150 VLANS that are able to be assigned to users that select option 1 - We have 100 VLANS that are able to be assigned to users that select option 2 - The form should then generate a username/password in the RADIUS server and send an email to the new user with their WiFi Login credentials, the RADIUS user should receive an available VLAN from the pools of available VLANS depending on what speed they selected. - Once the end date comes, the user account should be deleted and the VLAN should then be added back to the list of available VLANS ...

You will have to configure an isolated Switched network behind the RIV router (Inter VLAN Router). The Switched network consists of several switches, including a core switch and the remaining floor switches. On the floor switches, client devices will be connected to the following VLANs: Production, Management, and WiFi. For the core switch, configure it as a VTP server and set it as the root for all the company's VLANs. Create all the company's VLANs on the core switch. All ports on the core switch should be configured as multi- VLAN

I am looking for a freelancer who can help me set up VLAN and subnet masks on my network equipment. I have an omada system, controller, router and multiple eap's. I have multiple vlans setup but when I adjust the main network subnet mask routing seems to fail. Ideal Skills and Experience: - Experience in setting up VLAN and subnet masks - Knowledge of network security protocols and best practices

I am looking for an experienced specialist to aid me in configuring a VLAN network on an Avaya IP Office system. I am in need of assistance but not sure which network setup is best for me - single VLANs or multiple - so I would appreciate help with making a decision and implementing it accordingly. The specialist should also be knowledgeable about performing just the VLAN configuration, as I do not need any help with integration into my existing network.

I am looking for a freelancer who can help me set up VLANs on my UDM Pro. The purpose of this VLAN setup is to segment network traffic. Specifically, I have a list of devices or users that will be assigned to these VLANs. I am looking to set up 1-3 VLANs in total. Ideal skills and experience for this project include: - Strong knowledge and experience in setting up VLANs on UDM Pro - Understanding of network segmentation and traffic management - Ability to configure VLANs based on specific device or user requirements - Familiarity with network security best practices - Experience in optimizing network performance through VLAN setup

...freelancer who can assist me with GPON OLT provisioning. I already have the Genexis Saturn Solt33 08p equipment in place, but require basic configuration. The ideal candidate should have experience in GPON OLT provisioning, specifically with Genexis equipment. Additionally, they should possess the following skills: - Expertise in configuring GPON OLT systems - Knowledge of basic configuration, VLAN, and QoS - Familiarity with Genexis equipment I am looking for a freelancer who can work efficiently and effectively to configure my GPON OLT system. This is a one-time project, and the freelancer will have the opportunity to work with me on future projects if the work is satisfactory. The following are the expectations for project completion: - Connect to the VPN network using PP...

Have a Firewalla gold router and firewall. Using Omada EAPs, 1 managed Omada switch, 2 unmanaged netgear switches, and Omada oc200 controller. Looking for 2 deliverables: 1. Create VLAN for IoT devices 2. Setup 1-way communication so devices on main network can access printer/Roku/etc on IoT VLAN

Tengo un proyecto ya hecho. Necesito que se configure una VLAN troncal, una NAT dinámica y que se arregle un error en la redistribución.

I have multiple ISP providers, I would like to create multiple vlan where each router will be connected, each ISP router is connected to a different Mikrotik and the output of each Mikrotik goes into a separate uplink vlan port of the Huawei OLT (Mikrotik1 output 1 connect to G0, Mikrotik2 output1 connect to G1, Mikrotik3 output 1 connect to G2 etc...) I am not sure if the Line profile or the Service profile of the OLT are being configured correctly. I meant T-CONT, GEM Port index and GEM Port connection index... I would like someone with the knowledge to verify the configuration I have done and tell advise if it is wrong. Huawei OLT MA5608T

necesito un ingeniero que sepa de redes sdn para recrear una red sdn en ubuntu usando OpenDaylight como controlador, OpenFlow como protocolo y mininet como emulador, necesito que la red use una topologia estrella o mixta, tenga 6 switch y un pc conectado a cada switch y poder hacer envio de datos, streaming y poder ver los resultados usando una herramienta de monitoreo de datos como wireshark. Necesito que se haga capturas de pantalla desde la instlacion de dichas herramientas, configuracion de los switchs, controlador y finalmente capturas de pantalla de las pruebas del trafico de datos. El proyecto será requerido en unos 5 meses por lo que no hay urgencia inmediata :)

I am looking for a freelancer to update my current PacketFence Server configuration to meet new requirements. The ideal candidate should have experience in PacketFence configuration and troubleshooting. New requirements: - Allow the currently isolated sub-reds to have access to the server TCP services a...troubleshooting. New requirements: - Allow the currently isolated sub-reds to have access to the server TCP services and UDP IPTVs channels. Current State: - PacketFence is set up as a gateway in Inline Mode to create the isolated networks by Roles Solutions: 1. Update the current inline mode to allow the firewall to have access to the TCP services and UDP channels and VOP content 2. Set up of PacketFence VLAN mode 3. Open to a better solution to update the network with Packet...

I am looking for a Cisco Meraki expert to configure several VLANs for my network. I need between 1-5 VLANs configured with specific routing and firewall rules. The devices that will be connected to the VLANs are a mix of servers, workstations, and network devices. The ideal candidate for this project will have experience with Cisco Meraki configuration ...connected to the VLANs are a mix of servers, workstations, and network devices. The ideal candidate for this project will have experience with Cisco Meraki configuration and a strong understanding of VLANs, routing, and firewall rules. They should also be able to provide recommendations for best practices and ensure the network is Certification ECMS and a good working Knowledge of VLAN management using Meraki Infrastructure

I am in need of an expert freelancer who has experience with Mikrotik PPPOE servers, VLANs, OLT Huawei, and ONT. This project has already being designed and implemented. I will like someone to overview the project and tell me what is missing and what can be done for improvements. And guide me to implement the best solution. The ideal candidate should have in-depth knowledge of the following: - Configuring Mikrotik PPPOE servers - Setting up VLANs and connecting them to switches - Configuring OLT Huawei and ONT - Troubleshooting network issues Current design is attached. The project must be completed within 3 days. The freelancer should be able to work efficiently and deliver high-quality results within the given timeline.

I am looking for an experienced individual with a specific knowledge set in Software-Defined Networking (SDN). I want someone who is able to leverage Mininet and Ryu to test and monitor an existing SDN network. This individual must have a thorough understanding of SDN technology and be able to create network topologies and debug code. In SDNs use mininet and create different topologies connecting them with the Ryu controller to monitor flows. The switch is OVSK and the links are TC links. The traffic generates using continuous ping, Iperf3, and python server and clients script. I need a person who can generate collisions and errors in the SDN network environment by simulating a more congested network and record port statistics by Ryu controller using script. and record

I need some network professional that have good experience with Arista EOS and Cisco IOS. You need to work with both devices in the Area of VLAN, BGP SNMP, etc. I will give you access to both Consoles Remotely via AnyDesk. COM4 Arista DCS-7124S COM5 Cisco 6509 We have a Cisco 6509 which will be the Upstream for the Arista. You need to configure 2 BGP Sessions as well on the Cisco and setup 2 bgp instances on the Arista that need to establish with the Cisco 6509 (upstream) and its ASN. Also you need to create multiple VLANs etc. Attached in PDF is step by step tasks you need to do. If you think you are the right one for this job let me know

Requirements:The network supports two VLANs: Lab and Support. The address-ranges for the VLANs are shown in the figure. No routers can be used internally except for the R-Edge router, which connects the network to the internet. You need to implement two-layers switching architecture ...for the R-Edge router, which connects the network to the internet. You need to implement two-layers switching architecture with one switch at the distribution/core layer and three access switches. All the access switches support both VLANs. There is only one IP address assigned to this network. R-Edge must use PAT to share it between all the devices in both VLANs. You need to implement inter-VLAN routing. You can use either Layer-3 switching at the distribution switch, or Routing-on-a-stick ...

need someone to configure ADDITIONAL VLAN on the switch for Wifi only, we currently have 2 vLans 1 for data and 1 for voice

Need to configure a 60f fortigate firewall with a vlan for yealink hardware running on vonage

Hi. I would need a Cisco technician for my Cisco 1111 router configuration. I have two ISP routers and would like to set up a VLAN with load balancing. One Vlan for primary WAN 1( ISP 1), fallback WAN 2 (ISP 2) and one Vlan for ISP 2 primary and as fallback ISP 1.