Arduino bluetooth ipad jobber

iPhone/iPad App iPhone og iPad Jeg trenger den designet og bygget Hei-jeg trenger hjelp med å få laget en app .Jeg har ideen og hvordan den skal være ferdig forklart. Trenger bare noen som kan virkeliggjøre min ide til en ordentlig fungerende app. Trenger også hjelp til p legge den ut på Applestore og android googleplay butikk. Mvh Hodan

iPhone/iPad App iPhone og iPad Jeg trenger den designet og bygget Hei-jeg trenger hjelp med å få laget en app .Jeg har ideen og hvordan den skal være ferdig forklart. Trenger bare noen som kan virkeliggjøre min ide til en ordentlig fungerende app. Trenger også hjelp til p legge den ut på Applestore og android googleplay butikk. Mvh Hodan

iPhone/iPad App iPhone og iPad Jeg trenger den designet og bygget Heter Aleksander Bårtvedt og er 19 år gammel. Ser etter en sokkan hjelpe meg å programmere og få til en App hvor man har oversikt over bensin og diesel prisene i Hordaland Fylke. Denne appen må ha en GPS som kan vise distansen til den billigste, eventuelle bompenge avgifter og den nærmeste. Om den slår igjennom ønsker jeg å satse i større deler av Norge.

iPhone/iPad App iPhone og iPad Jeg trenger den designet og bygget Detter er en app som skal kunne synke mellom android og iOS. Og kommer til å være en underholdningsapp for alle aldere, og kommer til å bli veldig populær! Budsjettet er ikke bestemt, men setter det så lavt som går, så kan det diskuteres med den som er interessert i å hjelpe meg!

iPhone/iPad App Kun iPhone Jeg trenger den designet og bygget Jeg ser etter noen som kan utvikle app til IOS innen kamera/bilde fra en idè jeg som privat person har. Det er viktig at utvikleren har god kunnskap om dette og at han/ hun kan hjelpe til med å sette opp appen, samt følge retningslinjer innen lover og opplegging til AppStore! Personen må også kunne rådgive i forhold til hvordan man kan tjene penger via appen og brukervennlighet. utvikler har taushetsplikt! Pris kan diskuteres

Hei! Jeg har nettstedet Ønsker å oppgradere layouten på siden og gjøre den mer brukervennlig for administrator. - Jeg må selv kunne redigere siden. Ønsker at det blir lettere å legge ut nye innlegg og enklere å redigere innhold i sidebars, mm. Jeg vil bruke mer tid på å skrive og mindre tid på å jobbe med det tekniske på siden. - Fornuftig plassering av an...gjøre den mer brukervennlig for administrator. - Jeg må selv kunne redigere siden. Ønsker at det blir lettere å legge ut nye innlegg og enklere å redigere innhold i sidebars, mm. Jeg vil bruke mer tid på å skrive og mindre tid på å jobbe med det tekniske på siden. - Fornuftig plassering...

Skal lage en iPad/iPhone app. Mer info kan oppgis ved nærmere avtale. En non-disclosure agreement må skrives under ved inngåelse av avtale.

Vi skal lage en second-screen applikasjon. Det skal være en app som brukerne skal få ekstra informasjon på under direktesendinger på tv. Det kan være filmer, info om hva som skjer på skjermen, chatting, feeds med instagram, facebook, twitter osv. Vi ønsker en frontend til brukeren og en enkel backend som kan administrere og pushe ting ut til frontend.

appen skal fungere både på iphone og ipad fra ios 5 til ios 8 Biblen er ferdig oversatt så teksten har jeg det er bare å lime den inn har også musikk og bilder. og appen skal lages som en page based application

Knytte til meg programmerer / utvikler for programmering av applikasjoner til Iphone, Ipad og android. Først utvikle enkel app for forkortelser.

Jeg er ute etter noen som kan lage et simpelt iphone/ipad spill, angående ideer så har jeg ingen akkurat nå, men er åpne for forslag fra dere. i prinsippet så vil jeg ha et spill som er simpelt men samtidig artig, alla flappy birds, satser på stor suksess ifra detter haha.

rtertertertwertwertewryehertergher

Have an idea for a quiz app Can any programming, but need help setting up the basics. The application shall be made for iOS iPAD and iPhone in the first place. Coded in Xcode 5 Or if you have other suggestions came with it.

Jeg ønsker en skift kalender til iPhone/iPad for de som jobber offshore på rigg, samt for sjøfolk. Det finnes i dag flere slike på nett, men ingen til iPhone. Se på følgende link for som er en nettversjon av det jeg ønsker: I tillegg til de funksjonene som er der ønsker jeg å kunne eksportere "jobb" periodene til iPhone kalenderen, eksportere til venner via mail/sms ( i bilde/pdf format) og eksportere til "mine bilder" på iPhone. Når kalenderen genereres må det være mulig å kunne sette navn på den, slik at det f.eks. i toppen kommer "Ola Normann - 2013". Om mulig ønsker jeg også mulighet til å importere kalendere fra inntil 3 venner som ...

Jeg trenger hjelp til å lage en iphone/ipad app som lærere kan bruke i sin planlegging av arbeidsdagen. Jeg har en idé om hvordan en slik app skal se ut, og hvordan den skal virke, men trenger hjelp til å fullføre ideen. Jeg har prøvd mange slike applikasjoner, men ingen er slik jeg ønsker den skal være. Håper noen er interessert i høre på min idé.

I am in need of an experienced electrical engineer to assist with spec'ing an electrical system. The system design. -I am needing to control a Nema17 stepper motor and 300watt BLDC Motor. -I already have the motors selected and the drivers for each motor. -I am wanting to use an arduino microcontroller for the controls. -I require the power supply to be as small as possible, but still being well within in a safe range of the power demand of the system. Refer to addition info regarding the sizing, or have a discussion with me on possibilities. -Additional peripheral components: 3 x Push Button, 1 x power switch, 1 x small display screen. 2 x Limit switches. What I need done. I need a freelancer to design and spec the unspecified components around the ones that are al...

I'm looking for an experienced firmware developer specializing in STM32 microcontrollers. I already have arduino Mega tested code which i need to convert into stm32 family Key Project Details: - Specific STM32 Model: The project will involve firmware development for a specific STM32 microcontroller model. - Application/Use Case: While not specified, the project likely involves a real-world application within the realm of consumer electronics, industrial automation, or wearable devices. Skills & Experience: - Prior experience with STM32 microcontrollers is essential. - Proficiency in utilizing various communication protocols (e.g. UART, SPI) and integrating sensors would be a plus. - Familiarity with power management techniques is highly desirable. - Experience with the ...

I need to design a tracker control unit for the 137 MHz band antenna system of the ground station receiving weather information from the NOAA spacecraft on Arduino. The project must be modeled at https://projecthub.arduino.cc. Need your idea and help how to implement it.

The objective is to develop an application to manage two devices via WiFi (may be increased in the future) I have two devices: Sauna and red light therapy panel. They all have a touch control panel and can be connected to your cell phone via Bluetooth and Wi-Fi. Many of the providers also offer you the mobile application already developed (as can be seen in the attached images). The idea is to make a similar application from which the two devices can be managed (set time, lighting, power, etc.). And the history of uses/settings is saved. It could also be evaluated to take the code of the two suppliers' applications and combine them into one, strongly separating them within it.

I'm looking for an engineer who can help me write some code for an Arduino to help me with a hardware project to read accelerometer data / gyroscope data. I have a piece of construction equipment that is supposed to vibrate up and down, however, if a customer assembles some attachments to it incorrectly it will vibrate up and down and side to side which will damage the equipment. I want to be able to read the accelerometer data to determine my customer has placed the attachment correctly and if it's incorrect I want to display a message on an LCD screen saying "incorrect placement" or something to that regard. I need help getting the hardware to work, creating the code for the hardware as Phase 1. Phase 2 is to allow this hardware to send a signal back to...

...you were to pass the second logic test, and $50 (Fifty Dollars) if you were to pass the third logic test. ✻ OBTAINING SUPPLIES ✻ I will send you approximately $50 (Fifty Dollars) so that you can purchase ESP32 development boards, breadboards, components (such as resistors, transistors, and capacitors), wires, etc. on a site such as AliExpress, Mercado Libre, etc. The ESP32 is similar to an Arduino. I realize it may take you up to 30 (thirty) days to obtain these items. That's fine with me. However, I will * not * help you deal with corrupt local customs officials who require bribes to release goods. Any “horror stories” you might have heard or read about corrupt local customs officials in your country requiring bribes to release goods probably were for item...

Seeking Application Developer for Consultation We want to develope a cross-platform mobile ...user experience and functionality. Consultation Scope: - Secure File Upload: Enabling users to upload audio files with embedded encrypted keys. - Encryption & Decryption: Implementing robust encryption methods to ensure the secure attachment of keys to audio files. - File Sharing Facilitating the secure transfer of files between users within the app. - **Bluetooth Key Sharing:** Allowing the encrypted key to be shared via Bluetooth between devices. - Cross-Platform Development: Ensuring compatibility and seamless functionality on both iOS and Android platforms. - **Integration with Shopify: Connecting the app with our existing Shopify website for user authentication and tr...

...hardware system for a fitness rig that involves real-time human movement tracking. The system should be a combination of microcontrollers and computer vision technology, specifically using Arduino boards and Raspberry Pi. Key Requirements: - Real-time Movement Tracking: The primary functionality of the system is to track human movement accurately and in real-time. This involves capturing and processing data on various physical activities. - Minimalistic and Functional Design: I envision a setup that is small, lightweight and unobtrusive. Skills and Experience Needed: - Proficiency with Arduino boards and Raspberry Pi is a must. - Experience with computer vision, machine learning and human movement tracking is highly desirable. - Understanding of fitness or sp...

Vennligst Registrer deg eller Logg inn for å se detaljer.

I need assistance programming an Arduino Opta PLC for remote monitoring. - The device must: - Monitor all 8 voltage inputs. - Provide access to monitored data through a web interface. Including Bluetooth capabilities and Wifi. Needs to send emails to customers or notifications to my apps. Ideal Skills: - Proficient in Arduino programming - Experience with PLC programming - Knowledge about remote monitoring and control systems.

...hardware system for a fitness rig that involves real-time human movement tracking. The system should be a combination of microcontrollers and computer vision technology, specifically using Arduino boards and Raspberry Pi. Key Requirements: - Real-time Movement Tracking: The primary functionality of the system is to track human movement accurately and in real-time. This involves capturing and processing data on various physical activities. - Minimalistic and Functional Design: I envision a setup that is small, lightweight and unobtrusive. Skills and Experience Needed: - Proficiency with Arduino boards and Raspberry Pi is a must. - Experience with computer vision, machine learning and human movement tracking is highly desirable. - Understanding of fitness or sp...

...a UI designer to create a modern and sleek user interface for an ESP32/Arduino and a sensor based project. The design should feature gauges and other components in various colours completing a modern and clean aesthetic design. The UI should include the following components: - Sensor Readings: The main screen should present readings from various sensors in a clear and easy-to-understand format. - Real-time Graphs: The design should incorporate real-time graphs that display data trends in an engaging and user-friendly manner. - Control Buttons: The UI must also include control buttons for user interaction. Ideal candidates should have: - Proven experience in UI design for IoT projects, particularly for ESP32/Arduino. - Proficiency in creating sleek, modern, and minim...

I'm looking for an Arduino expert to setup an Opta PLC that can effectively monitor temperature readings. The system should be able to: - Receive inputs from different temperature sensors and digital inputs. - Monitor a vast range of temperatures from below freezing to above 90°F. - Send email notifications of temperature readings and changes every hour for remote monitoring. The perfect freelancer for this project is experienced in programming Arduino Opta PLCs, utilizing sensors, particularly those for temperature, and setting up efficient email notification systems. Beside technical proficiency, good understanding of thermodynamics would be a plus, but is not a requirement. The end-goal is an efficient and reliable remote temperature monitoring system.

I'm in need of an experienced Android developer to update our Java-based app, originally designed for Android 5 KitKat, to work seamlessly on modern tablets. Key Requirements: - Improve User Interface: The project involves enhancing the app's existing UI. - Compatibility Upgrade: Th...Requirements: - Improve User Interface: The project involves enhancing the app's existing UI. - Compatibility Upgrade: The current app is only compatible with Android 5 KitKat; the developer must ensure it functions smoothly on contemporary tablets. Additional Information: - The app currently consists of 6-10 screens or activities. - A new feature will be the integration of Bluetooth connectivity. -The app controls hardware via bluetooth, sends PWMs and reads ADC values and read...

Task description I am in need of a competent freelancer with proficiency in arduino, particularly for STM32 microcontrollers (specifically the NUCLEO-G491RE model) and ESP32 microcontrollers (specifically the ESP32-DEVKITC-32UE). It needs a certain amount of inputs and outputs to begin with, but also minimum 2 outputs with PWM-control or analog 0-5V, as the motorcontroller of choice works with PWM or 0-5V inputs. Also 2 analog inputs 0-5V for 2 kinds of safety edges. Find also the list of peripherals in the attachment. The pulse generated by the motorcontroller won’t exceed 500 Hz with our current motor/motorcontroller configuration. (see peripheral list: section motorcontroller) In total we need to have: Digital inputs: 12 Digital fast inputs (counter): 2 Analog inputs: 2 Di...

I'm in need of an Arduino expert who is adept at programming a small Arduino circuit to control LEDs, a motor, and sound. It will be integrated into a small, Matchbox/Hot Wheels-sized fire truck. The LEDS will flash alternately to represent the emergency lights. The motor will power the back wheels and the sound will play through a small speaker as a siren and horn. Here are the requirements for the project: I believe the Arduino MKR Zero would be a good fit since it has the integrated micro SD card holder and sound processing capabilities. It also has an integrated battery charger. The Arduino needs to be powered by a rechargeable Lithium Polymer battery like 3.7 Volts. - Control LEDs: I believe I can get by with two white 3mm LEDs. I will install fibr...

I am seeking a professional and capable freelancer to create a home automation system using Arduino technology. The system should incorporate some form of MIDI control for traktor Dj software - **Expertise Required** - Strong knowledge of programming Arduino. - Prior experience in home automation design and implementation. - Proficiency in achieving interoperability between different smart home systems. - Familiarity with MIDI controls. - **Key Features** - The use of knobs, faders, and buttons on the MIDI controller to enable intuitive interaction with different systems. - Lighting control: an easy-to-use and versatile system to control various lighting fixtures around the house. Please provide examples of similar projects you have completed previously.

I am looking for an adept developer to create a productivity iPad app tailored to students. The app should encompass: - Note taking: The heart of this app is note taking. Users should be able to quickly and smoothly record, edit, organize, and access their notes. - Collaborative work features: In addition to personal note taking, the app should facilitate collaborative work among users. This includes features that enable sharing, co-editing, and discussion of notes. The ideal candidate for this project has extensive experience in productivity-based application development, a strong grasp of ux/ui design for a student demographic, and a track record of creating apps with seamless collaborative features.

...developer capable of creating a Bluetooth iOS app from scratch for controlling low-complexity Arduino devices, particularly LED lights. Key aspects of the project include: - Developing the app from ground zero: As the app isn't based on any existing software, the developer has creative license within the confines of my requirements. - Arduino Device Control: The main function is to control Arduino devices. Familiarity with Arduino-related software is strongly preferred. - Bluetooth Connectivity: The app should maintain stable bluetooth connection with the Arduino devices. - User-friendly interface: It should have an aesthetic, yet functional UI that's easy to navigate. Ideal Skills and Experience: • Extensive k...

I am in need of a skilled individual who can establish a connection between an Arduino (ESP 8266) and Firebase. This connection is essential as it's intended to control and monitor environmental sensors remotely. Key Requirements: - Impeccable expertise in Arduino programming and configuration, specifically the ESP 8266 module. - Proficiency in Firebase setup and integration. - Experience in real-time data collection and storage. - Prior work experience in remote device monitoring and control. The project entails the following key aspects: - Establishing a secure and reliable connection between the Arduino (ESP 8266) and the Firebase platform. - Programming the system to enable remote monitoring and control specifically for environmental sensors like temperatur...

...you were to pass the second logic test, and $50 (Fifty Dollars) if you were to pass the third logic test. ✻ OBTAINING SUPPLIES ✻ I will send you approximately $50 (Fifty Dollars) so that you can purchase ESP32 development boards, breadboards, components (such as resistors, transistors, and capacitors), wires, etc. on a site such as AliExpress, Mercado Libre, etc. The ESP32 is similar to an Arduino. I realize it may take you up to 30 (thirty) days to obtain these items. That's fine with me. However, I will * not * help you deal with corrupt local customs officials who require bribes to release goods. Any “horror stories” you might have heard or read about corrupt local customs officials in your country requiring bribes to release goods probably were for item...

...developer to create an android app that will connect with machine hardware via Bluetooth and communicate with an ESP32/similar microcontroller. Also design a PCB to integrate the microcontroller with the machine's electronically operated devices. - Design: I don't have a specific design in mind, so I'd need your help with designing the app. - Design: Design a pcb to integrate microcontroller and other electronically operated features. - Functionality: The key functionality of the app will be to control the LEDs on the machine. More specifically, I'd like the LEDs to be used to scan an object. Ideal skills and experience for this job include: - Proficient in Android app development - Experience with Bluetooth integration - Familiarity with ESP32 or si...

...reliable freelancer to help me with app functionality demonstration through a screencasting project. The role primarily involves: - Using a PC/Laptop, Android phone, and an iPhone/iPad for the demonstration. - Strictly following the steps outlined in the instruction I will provide. - Focusing on the following key areas of the app: Registration process, Navigation and menu options, Search functionality, and Interactions with other users. - Capturing the entire process using a screen recording app. Ideal candidates should have: - Proficiency in operating a variety of devices, including PC/Laptop, Android phone, and iPhone/iPad. - Proficient experience in screencasting and demonstrating app functionality. - Strong attention to detail to accurately follow instructions and ca...

I'm seeking a skilled programmer to assist in developing a taekwondo scoring system. The project entails crafting code for a system comprising one master and four slave devices all to be programmed using Arduino. Wireless communication between the devices will be facilitated through the ESP-NOW protocol. The job entails several key responsibilities: For the SLAVE devices coding : 1. Each slave device should feature an initialization green LED that indicates successful wireless communication with the master device. 2. Additionally, each slave will have two LEDs, one red and one blue, which will illuminate when specific buttons (B1 to B3 for blue team, R1 to R3 for red team) are pressed by the user. 3. With a total of six buttons per slave device, each responsible for assigning...

I'm looking for a skilled web developer to create a static website for our software designed to manage biomedical waste. The software is used to collect waste from various healthcare facilities like hospitals, clinics, and pathology labs. It incorporates an Android app that allows users to scan waste bags and record their weight through a Bluetooth scale. The main aim of this project is to create a professional and informative online presence for our software. The website should have 2 main sections: 1. Product Description: - This should be a detailed and compelling overview of the software. - It should explain the purpose and benefits of the software in a clear and engaging manner. - The text should be accompanied by relevant images that help illustrate the uses and featur...

El programa a desarrollar permitirá controlar de forma dinámica y eficiente múltiples paneles LED RGB de 64x32 píxeles utilizando un ESP32 y el entorno de desarrollo Arduino IDE. Se podrán cargar y mostrar una o varias imágenes estáticas, así como texto en movimiento con una velocidad y dirección definidas. Funcionalidades: Mostrar una o varias imágenes estáticas en los paneles LED. Desplazar texto en movimiento horizontalmente a través de los paneles. Ajustar la velocidad y dirección del movimiento del texto. Soportar de 1 a 5 paneles LED RGB para una mayor flexibilidad en la configuración.

...searched for and used for future jobs (also ability to edit / delete part). - Ability to export each completed job card (including attached PDF files, pictures and notes) to a PDF. - Sync with Quickbooks Online to allow the syncing of customers - Sync with Quickbooks Online to send completed job cards for invoicing. Updated: - Ability to print a delivery note on job completion (or have signature iPad) * We do NOT need any type of scheduling or tracking for employees. Primary Users: - Employees and Managers/Administrators: This system is primarily for the use of employees who will be responsible for carrying out the tasks listed on the job cards and the managers/administrators who oversee these tasks. Employees will need access to all past completed and active jobs. Managers wi...

...project that focuses on AI and Machine Learning. The AI/ML algorithms are in place but I'm in need of an IoT expert to help establish a robust Arduino-based connectivity solution. Key project requirements: - Completion of IoT connectivity: I need someone who can work with Arduino and establish a reliable IoT connectivity system. - Troubleshooting existing code: The project is partially done, and there might be some debugging required. - Documentation: I'm also looking for someone who can provide clear documentation of the implemented IoT solution. Ideal skills and experience: - Strong Arduino and IoT background: An expert in IoT systems and Arduino programming. - Familiarity with AI/ML: While not strictly necessary, a good understanding of AI/ML m...

I need someone skilled in Arduino for a robotics control project centered around security. Here's what I hope to achieve: - Integration of Arduino with an existing access control system. Ideal skills would be proficiency in Arduino programming, experience in security system control, and knowledge in automation. Your proposal would stand out if you have handled such tasks before and can complete the milestone within the budget of 2k INR. Looking forward to a successful collaboration.

- Communicated bluetooth function on esp32 - able to connect stm32 master

Hola !! necesitamos un diseñador gráfico para nuestra empresa que nos pueda diseñar banners y Flyers para redes sociales, publicidad etc... Necesitamos alguien moderno, creativo e innovador dado que nuestro actual diseñador por ...aproximadamente 6 banners y una vez creados adaptados en tamaño para una tv física de la tienda, web e Instagram 8 banners en 3 tamaños tv, web y instagram List banners (sizes tv 1920×1080px web 1920×500 or 600px and instagram 1080x1080) 1. Cambio de cristal Apple Watch 2. Instalación de Monterey, Ventura, Sonoma en macs no soportados 3. Reparación de Flex Face ID 4. Cambio de cristal tactil en iPad´s 5. Reparamos todos los productos de Apple 6. Reparación de crista...

Seeking someone with skills in Arduino and MIDI technology. Your task will entail creating a connection between LoraMidi AtMega1284P and Arduino IDE. The main objective here is to control MIDI devices using this interface. What I Need: - Develop a way to control LoraMidi AtMega1284P using Arduino IDE - Enable wireless transmittance of MIDI data - Develop a custom LoraMidi communication protocol Ideal Freelancer: - Proficiency in Arduino IDE - Familiarity with LoraMidi AtMega1284P - Experience in MIDI technology There is not a strict deadline for this project, and we can prioritize quality deliverables over speed. Please submit your proposal detailing how you intend to accomplish the indicated tasks.

Programa para crear un radar con arduino, que imite un radar real, con un sensor de ultrasónico Hc Sr04, un servo Sg90, un botón interruptor, un buzzer, una pantalla oled 0.96 o similar. Con el interruptor debe cambiar el modo del radar: pantalla con distancia, con líneas y distancia, grabar en memoria y representar el entorno, etc.

I need to build a Mac/ipad application. Write in swift so it’s cross compatible. It is an html website editor WYSIWYG. I don’t need anything fancy, but I am wanting to build this because I need this for myself and there is not good ones available and maybe others could benefit from it. What I want is an html editor with live preview, where you can switch between the html and editing it as a text document and it auto converts to html. Main features include: Manage organization, including multiple html documents integrated, as well as other documents such as images. Organize a “project” with multiple files and folders, kind of like an IDE but simplified for HTML editing. Expect your website as code files in the same folder structure you set up so you can j...

...system. This application would need to be made to run within the arduino or other. Would like to eventually move to a chipset if able. Key Requirements: - Voice Recognition: The system should have high accuracy voice recognition capabilities. - Intent Extraction: It should be able to extract specific intents from the recognized speech. - Standalone Operation: The system should function independently without requiring an internet connection. Specific Intents: - The system should be able to recognize and act upon commands related to controlling mouse functions, such as cursor coordinates and clicks. Ideal Candidate: - Experience in developing speech-to-intent systems. - Proficiency in programming microcontrollers or Arduino for standalone operation. - Strong...