We've a MikroTik CHR as LNS receiving ppp traffic from broadband aggregation group over l2tp tunnel. this solution is known as LNS and working without issue in Cisco, but there are some issues with our mikrotik setup and it's not getting pppoe frames.
MikroTik support LNS from 6.35 i think but I am missing something in configuration.
Only Senior Network Engineers (with LNS experience especially on mikrotik or cisco ) bid please.
Dear Sir
I'm interested in your project. I would like to help you to solve your issue.
Please feel free to contact me if you have any further queries.
Best Regards,
Tanvir Rumman
Hey there,
I've previous experience in LNS to receive ppp connections on l2tp from a provider in UK and authenticate against radius with bgp etc. etc.
That time I remember there was a serious issue on the mikrotik and we rolled back to lower version, submitted support request and mikrotik finally solved the issue.
I am sure with some digging in my chats and emails I have the complete configuration backup of what I've done and also know the issues in this solution, so I can help you get it done the right way,
Contact me to discuss the details.
Regards.
Good day!
I am MikroTik certified network engineer (MTCTCE/MTCNA) having over 10 years of experience in configuring, maintaining and troubleshooting of enterprise MikroTik devices (RouterOS v5/v6).
I can try to help You with your L2TP Server on MikroTik.
Hi
My name is Samson K and I am a network engineer with 9+ years hands on experience in an ISP environment working with Mikrotik and Cisco. I am familiar with tunneling and your current setup.
Which CHR OS version are you running?
Please do not hesitate to contact me to further discuss your project
Regards
Sam
Hello sir:
I'm a certified Mikrotik consultant. would you please let me see your config?
it might be an mtu problem.
what's the lac? is that a Mikrotik device too?
please feel free to contact me.
Hi.
I have no practical experience in PPPoE over L2TP / LNS. Too specific task. But my 20+ years of network experience and hundreds of configured ,ikrotiks suggest that there would be no place to make a mistake there. Do you have an L2TP connection going up? Do you see traffic on this connection in the sniffer? You can make a mirror port, send traffic on a PC and analyze its in wireshark.
If you do not find a specialist with the necessary experience, write to me. I will either deal with the problem or bring everything to a state where you can / need to contact mikrotik technical support. The volume of work I can not estimate now. Cost 20 USD per hour. I think that a few hours to determine the reason we have enough.
Hello
I have mikrotik MTCINE, MTCNA, MTCRE, MTCTCE, MTCUME, MTCWE.
only need remote winbox access to check what configuration is wrong .
if you wan't send me a export rsc file from your config to analys it.
thanks
Hi There
I'm a senior network engineer from Australia and I have worked with Cisco & MikroTik LAC/LNS using PPPoE using Linux based RADIUS for authentication.
I have extensive experience troubleshooting and configuring what you're looking for and managed a medium ISP in Australia for 8+ years that had 50+ MikroTik LACs, with multiple Cisco LNS'.
I look forward to working with you.
Dylan.