Find Jobs
Hire Freelancers

Utility to build a mold from an STL file

€30-250 EUR

Stengt
Lagt ut omtrent 5 år siden

€30-250 EUR

Betalt ved levering
I am working with STL files for 3D printing. The STL files normally contain the hull of a shape with no thickness. Imagine the shapes to be similar to a cup that you drink from. With this as an input, the utility should do the following: 1. Calculate the volume of the shape. 2. Extend the top of the shape an additional 4 mm (just a plain extrusion). 3. Project an additional surface 0.8 mm outwards and close the shape at the top (just flat, nothing fancy). This is to create a mold that will have 2-part rubber poured into it. 4. Using a specific density (1.06 g/mm3) of liquid filled to the initial height (before the 4 mm extension), calculate and create supports for the mold such that it can withstand a 10 degree tipping without falling over. There should be 4 supports, projected from the calculated center of gravity, 8 mm x 0.8 mm, going up from the 'floor' at 55 degrees, with very small feet around the supports. 5. A small notch (running most of the length of one side) has to created on a specific side of the mold, which brings the thickness down to approximately 0.4 mm. 6. The output file must be a valid STL file, and must run as a command-line utility on linux. 7. Java is preferred, but if you have another suggestion, please mention it with your bid.
Prosjekt-ID: 18748463

Om prosjektet

19 forslag
Eksternt prosjekt
Aktiv 5 år siden

Ønsker du å tjene penger?

Fordeler med budgivning på Freelancer

Angi budsjettet og tidsrammen
Få betalt for arbeidet ditt
Skisser forslaget ditt
Det er gratis å registrere seg og by på jobber
19 freelancers are bidding on average €184 EUR for this job
Brukeravatar
Hey, I'm a product designer/Mechanical Engr. Please share more details so that I can take a look at he file. Feel free to take a look at my profile so that you can select me. Have a great day!!!
€250 EUR om 3 dager
5,0 (81 omtaler)
6,8
6,8
Brukeravatar
Hi... For 3d print workable Stl out put as per your specs, Professional 3d print ready modeling and design services will be provided with cost effective manner. Your Budget and Your offer will always respectful to us. so please discuss in chat for detail. Please visit freelance profile and check ranking/standing and rating/reviews. With the 12 years of expertise, we guarantee the services of reliable and flexible team work. Looking forward for long term professional relations. Best Regards Shahid 3d Homes
€199 EUR om 7 dager
4,9 (55 omtaler)
6,2
6,2
Brukeravatar
Hi i have many years of experience in 3d printing ..Please message me ..................................................................... Regards
€200 EUR om 3 dager
4,8 (79 omtaler)
5,8
5,8
Brukeravatar
Hello ! I can provide you proper stl file for 3d printing. Please share any drawing that you have, so i can have proper insight on this and can provide you proper confirmation. Skills: Mechanical Engineering, Solidworks, Autocad, Fusion 360, Inventor, Ansys, Keyshot Bid quote depends on project work, we will discuss it when you share details.
€30 EUR om 3 dager
5,0 (89 omtaler)
5,9
5,9
Brukeravatar
i have read the six points specifications of the needed utility i prefer to use java i think 5 days will be enough Regards
€500 EUR om 3 dager
4,8 (42 omtaler)
5,7
5,7
Brukeravatar
expert AutoCAD 2D/3D 3d printing, solid works, Excel autocad , autodesk fusion 360 and sketchUP user. Best quality work in lowest price guaranteed. No any rework charges. 100 % work satisfaction. please consider. thank you
€150 EUR om 3 dager
4,7 (94 omtaler)
5,8
5,8
Brukeravatar
Hello there! I am a catia expert, product designer, and mechanical engineer. I checked your job carefully and I have a great interest in your job. I have many experiences in your project. I can make changes and send you stl file for 3D printing. I'm sure of completing your project in the shortest time with high quality. If you hire me, then your project will be completed more successfully. I am waiting for good news. Best Regards. abhishek
€111 EUR om 3 dager
4,9 (35 omtaler)
5,6
5,6
Brukeravatar
I am an architect with 13 years of experience in 3d modeling of various types of projects. I have experience in 3d models of industrial design. Also I have experience in create models for 3d printing. I am an expert in autocad and 3dsmax. Best regards.
€250 EUR om 3 dager
4,9 (27 omtaler)
5,0
5,0
Brukeravatar
I am here to bring your product to life. I'm a mechanical engineer and I have 8 experience years. Experience type: 3D, 2D models, Render, Sheet metals, Machine and Devices, industrial product, Plastic molds, plastic parts Software program: Autodesk Inventor,Solidworks, Autocad , NX-Siemens I am always glad to cooperate, I guarantee quick lead-time and free revisions and required. Your project will be developed with speed and high quality, as well as all the jobs already accomplished. Please send me a message.
€250 EUR om 10 dager
4,7 (19 omtaler)
5,0
5,0
Brukeravatar
Hi there, I have read your project description and completely understand that you need a stl file of your product. I will he more than happy to help you with your project. I can assure you the best quality within your time frame and budget. Contact me so that we can discuss more. Looking forward to work with you Regards Irfan
€100 EUR om 2 dager
5,0 (6 omtaler)
3,4
3,4
Brukeravatar
I am working with STL files for 3D printing. The STL files normally contain the hull of a shape with no thickness. Imagine the shapes to be similar to a cup that you drink from. With this as an input, the utility should do the following: 1. Calculate the volume of the shape. 2. Extend the top of the shape an additional 4 mm (just a plain extrusion). 3. Project an additional surface 0.8 mm outwards and close the shape at the top (just flat, nothing fancy). This is to create a mold that will have 2-part rubber poured into it. 4. Using a specific density (1.06 g/mm3) of liquid filled to the initial height (before the 4 mm extension), calculate and create supports for the mold such that it can withstand a 10 degree tipping without falling over. There should be 4 supports, projected from the calculated center of gravity, 8 mm x 0.8 mm, going up from the 'floor' at 55 degrees, with very small feet around the supports. 5. A small notch (running most of the length of one side) has to created on a specific side of the mold, which brings the thickness down to approximately 0.4 mm. 6. The output file must be a valid STL file, and must run as a command-line utility on linux. 7. Java is preferred, but if you have another suggestion, please mention it with your bid.
€155 EUR om 3 dager
4,9 (4 omtaler)
2,5
2,5
Brukeravatar
Hello! I can complete your project work with instructions as provided by you. Following will be my responsibility:- 1. Calculation of volume of shape. 2. Making geometrical changes like Extending the top of the shape and projection of additional surface. 3. Calculation of supports for liquid of specific density (1.06 g/mm3). 4. Implementing the supports. 5. Creation of Notch. 6. Verifying your product from engineers of Central Institute of Plastic Engineering and Technology for quality of the product. kindly discuss your project work in chat.
€222 EUR om 5 dager
2,8 (5 omtaler)
3,4
3,4
Brukeravatar
My main work is injection plasic mold design so i can do this project for you as you need and in short time
€55 EUR om 2 dager
0,0 (0 omtaler)
0,0
0,0
Brukeravatar
-day 01 - For the beginning of my work pays $ 100 on this day. We exchanged information about the project - briefing via email. 3D of hardware, photos, images, video, descriptive, power-point presentation, etc. - Day 3 - We present 3D winp for fine tuning, technical data needed to update without changing the design intent presented on 01. This presentation serves to align everything that is necessary for the definitive 3D delivery of the day 07. You pay $ 100 in this day. - day 07 - 3D is delivered via email and the job ends. if you want some update not specified previously we deal in a new project and new denial. You pay 50 U $ on this day. Best Marco Araujo
€250 EUR om 7 dager
0,0 (0 omtaler)
0,0
0,0
Brukeravatar
My team has great experience in 3d modeling and engineering drawings. We have previously worked on designing and creating molds so we can provide you with the best solution for your needs.
€100 EUR om 12 dager
0,0 (0 omtaler)
0,0
0,0

Om klienten

GERMANYs flagg
Wolfratshausen, Germany
0,0
0
Medlem siden jan. 29, 2019

Klientbekreftelse

Takk! Vi har sendt deg en lenke for at du skal kunne kreve din gratis kreditt.
Noe gikk galt. Vær så snill, prøv på nytt.
Registrerte brukere Publiserte jobber
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Forhåndsvisning innlasting
Tillatelse gitt for geolokalisering.
Påloggingsøkten din er utløpt og du har blitt logget ut. Logg på igjen.