Need Firmware for Freescale mc9s08dz128clh microprocessor

I have a board with: - Freescale mc9s08dz128clh is micro - Freescale MMA7455L is accelerometer - FTDI FT232RL is USB chip - Newhaven NHD-C12865AZ-FSW-GBW is LCD display - Lithium Ion battery with charging circuit from USB power - On/Off buttons and 4 menu buttons for LCD menuing - Several analog inputs, 2 frequency inputs and 1 analog output. I need firmware for several (more than 10) different applications. I can send a board for you to work with. I can load firmware with free Freescale "Hiwave" programming software. If you bid on this project and complete it, there will likely be several more applications I will route directly to you. For this first application, I just need to be able to have the device display an analog voltage from 0-5 volts from the first analog input channel on the LCD screen. There does not need to be any interfacing with the USB from the computer or menuing from the 4 buttons. I want to keep this first project simple so I can find out how well this process will work. I've attached a list of components on this board. ## Deliverables 1) All deliverables will be considered "work made for hire" under U.S. Copyright law. Employer will receive exclusive and complete copyrights to all work purchased. (No 3rd party components unless all copyright ramifications are explained AND AGREED TO by the employer on the site per the worker's Worker Legal Agreement). ## Platform Freescale mc9s08dz128clh is microprocessor