Find Jobs
Hire Freelancers

Stepper drive.

$30-250 USD

Fullført
Lagt ut nesten 3 år siden

$30-250 USD

Betalt ved levering
I am a retired tool and die maker with some electronics skills, programming is not one of them. What I am in need of is an Arduino coupled with an MPU6050 capable of driving two stepper motors using A4988 motor drivers. The motors should be stationary when the MPU6050 is level. When the pitch or roll change, either in a positive or negative motion, the motors should rotate, either CW or CCW depending on the angle of movement. It would be ideal if the motors speed of rotation increased the more the pitch or roll increased from 0 deg. I would require a sketch as well as a schematic.
Prosjekt-ID: 30502805

Om prosjektet

20 forslag
Eksternt prosjekt
Aktiv 3 år siden

Ønsker du å tjene penger?

Fordeler med budgivning på Freelancer

Angi budsjettet og tidsrammen
Få betalt for arbeidet ditt
Skisser forslaget ditt
Det er gratis å registrere seg og by på jobber
Tildelt til:
Brukeravatar
Hello I'm an electronics engineer with 10+ years of experience, including Arduino, ESP, STM, and Raspberry. I have all the hardware for the project and ready to start immediately. Please contact me to discuss the details. Best regards, Dennis
$210 USD om 5 dager
4,9 (7 omtaler)
4,7
4,7
20 freelancers are bidding on average $161 USD for this job
Brukeravatar
Best PCB Design Expert at your doorstep! Dear Client, We have lots of experience in Arduino so we able to do this project for you. We can provide Arduino coupled with an MPU6050 capable of driving two stepper motors using A4988 motor drivers as per your requirements. We can provide a sketch as your schematic so, Please message us so that we can discuss in details what shall be step by step formula for a Stepper drive. We couldn’t stop ourselves from bidding after going through the description as they are an exact match with our skill set and experience. We have experience in Stepper drive based PCB design and know all the intricacies required to get the job done with perfection. With more than 15 Years of experience in PCB Design and Circuit Design in Altium. Following is a brief list of expertise that we are carrying: 1. IOT products development 2. Microcontrollers based circuit design – STM32, STM8S etc 3. Smart Products like Smart watch - GSM/GPRS 4. Wireless Products 5. MPU6050, A4988 motor Please answer the following questions: 1 What are your future plans with this project? 2. Are there any specific market standards like CISPER you are aiming? 3. What will be ambient temperature of this product? Please try to answer these questions based on which I would be providing free of cost consultation. The price mentioned is for indication purpose and exact would be calculated after requirements finalisation. Regards Avi Tech Experts Quality is never an Accident
$250 USD om 2 dager
5,0 (32 omtaler)
7,1
7,1
Brukeravatar
Hello, I have experience in designing electronics circuits and can complete your project. I can also develop hardware compatible smartphone apps which can control hardware. I have all the hardware available to test and debug the codes. If you wish we can discuss in details. Thank you.
$200 USD om 15 dager
4,8 (67 omtaler)
7,0
7,0
Brukeravatar
Hey there! I'm professional electrical engineer having master. I'm expert in arduino and circuit design and simulation task having more than 4 years of experience. I can do your task perfectly.
$100 USD om 2 dager
4,9 (81 omtaler)
6,3
6,3
Brukeravatar
FREE OF COST CONSULTATION Dear Client, I am an Electronic Engineer and I will provide Stepper drive with able to MPU6050 and Schematic in a quality and timely manner. I have extensive experience in Arduino and I will able to do this project for you. Please message me so that I can discuss in detail, budget and timeline of the project. I have read and understood your requirements and could do it for you in the least time and utmost superior quality. I have experience in Electronic device and could design it for you as per your requirements. I am having more than 15 years of experience in PCB and Circuit Design, Circuit simulation, IOT products development and building electronic products. The expertise of mine is in the following fields: 1. Wireless Products – BLE, WIFI, NFC, Lora etc. 2. Power Electronics 3. IOT sensors interfacing 4. Microcontrollers- ESP32, STM32, STM8S, RL78 etc. 5. GSM, GPS, GPRS 6. MPU6050 After reading your project details, I have certain queries and suggestions: 1. What is the application of this product? 2. What will be ambient temperature of this product? 3. What are the mechanical constraints to be taken care of? Please try to answer these questions based on which I would be providing free of cost consultation. The Price mentioned is for indication purpose and exact would be calculated after requirements finalization. Waiting for your reply, Regards Hari Mohan Engineering for one is a magic for others
$200 USD om 2 dager
5,0 (3 omtaler)
5,2
5,2
Brukeravatar
I will help you program arduino interfaced to MPU6050 and A4988 MPU detect pitch/roll changes to drive your stepper CW or CCW at a given speed I will draw you a schematic as a guide to connect arduino to the MPU and A4988 I hope you have a right SMPS (volts and amperes) supply for your stepper motor send me a message so I can start the task now Thanks
$160 USD om 7 dager
5,0 (25 omtaler)
5,0
5,0
Brukeravatar
Hello I have experience in Embedded System Design include Motor Driver board. I can share you sch and sketch as well. I'm flexible with my working hours. Cheers! Srdan
$140 USD om 7 dager
5,0 (6 omtaler)
4,5
4,5
Brukeravatar
Hello, I am an electronics and telecommunication engineer and I am quite experienced with hardware and embedded systems' design. So far I have designed many PCBs and I am experienced with EMI hence I am quite sure that I can help you with your project just give me all the details and I will do my best to help you. Best regards
$140 USD om 7 dager
4,9 (16 omtaler)
4,6
4,6
Brukeravatar
Hi, I am an electrical engineer and expert full stack developer. I can help you with that, Contact me.
$250 USD om 7 dager
5,0 (5 omtaler)
3,9
3,9
Brukeravatar
Welcome Sir I can help you in successfully completing your project. I am an expert in the Arduino field. I have done many similar projects for this work. Send me all the details. Here are some of my work I unveiled an integrated Arduino smart control system at Nestle Ice Cream Company I made a car robot that avoids obstacles I made a Bluetooth controlled robot and showed me its location on the phone I made a Wi-Fi-controlled robot I made an integrated smart control in a mini city I made a robot that is used for protection and it shows me the temperature and humidity of the place and it also shows me the percentage of gas in the place and can send me the percentage of lighting in the place and the distances around it -c/c++ -Drones circuit Design -fritzing -proteus -Tinkercad -PCB design -plc -cad
$30 USD om 2 dager
4,7 (10 omtaler)
3,9
3,9
Brukeravatar
Hello, I am control and electronic engineer. now I am working front end developer in freelancer. I read your despciption. I want to do this project. I have rich experience with microcontroller and DC & Step motor. I can drive this devices. Please give me this project. I will do my best efforts and complete this project perfectly. Please give me a chat. Thanks.
$200 USD om 10 dager
5,0 (1 omtale)
2,0
2,0
Brukeravatar
Stepper drive. Since 2012, almost from 8 years I am managing academic writing tasks successfully. I am working with my friends from different backgrounds, it means I can manage wide range of projects like; Engineering, Business, Arts, Computer Sciences, Medical Sciences, Mathematics and Statistics. Now I am here on freelancer.com to serve my clients with masterpiece against very REASONABLE PRICES. I can help you with your Online Exams, Quizzes, Summaries, Research Papers, Reports and Dissertations and ETC. I provide FREE Turnitin reports and countless revisions to my clients. I PROMISE you 100% SUCCESS. For samples, visit my profile: https://www.freelancer.com/u/FineIdeas
$30 USD om 1 dag
5,0 (1 omtale)
1,0
1,0
Brukeravatar
Hello my name is Alvaro, I have experience in circuit design, PCB layout design, programming with arduino MCU, ARM and WIFI, stepper motor control, I have built 2 CNC I know well how the drivers work to control stepper motors, I am sure I can help you, send me a message to review the details of the project and to fix a price
$140 USD om 7 dager
0,0 (0 omtaler)
0,0
0,0
Brukeravatar
Hello, Checking your requirements we found ourselves fit to proceed with this project. We are very much confident that we can achieve and fulfill all the project needs. with our efforts. Before start workings I would like to have a detailed discussion with you on this project in order to clarify the specifications better as i have some queries also. Kindly initiate me on chat to make a live conversation. Profile: https://www.freelancer.com/u/devbaker
$180 USD om 7 dager
0,0 (0 omtaler)
0,0
0,0
Brukeravatar
Hi there, I noticed you are looking for someone who can assist you on your arduino, motors and gyroscope project. To give a few examples of my similar work, please have a look at my portfolio containing several prototyping projects that involved the key components of your project(portable motors, arduino, motor drivers, accelerometers, gyroscopes). Based on your project requirements, I can assist with the design of the motor control, gyroscope/accelerometer detection, microcontroller programming and thereafter provide you with the arduino code, electronic schematic, simulation instructions for you to test the concept and cad model showing the arrangement of components. You are guaranteed to get a professional service without any disappointments at a fast turn around time as your feedback and rating is more crucial. On the other hand, can you tell me about the power source. Do you plan on using batteries and if yes which type? The key is to come up with a detailed design of everything. I would love to discuss more possible over a chat. Best regards Mandlenkosi N
$156 USD om 6 dager
0,0 (0 omtaler)
0,0
0,0
Brukeravatar
I am very much interested and experienced person to work on Arduino. I can finish your work with the accurate output. which you want. further details we will discuss on chat. if possible thank you
$222 USD om 15 dager
0,0 (0 omtaler)
0,0
0,0

Om klienten

UNITED STATESs flagg
Bryson City, United States
0,0
0
Medlem siden jun. 11, 2021

Klientbekreftelse

Takk! Vi har sendt deg en lenke for at du skal kunne kreve din gratis kreditt.
Noe gikk galt. Vær så snill, prøv på nytt.
Registrerte brukere Publiserte jobber
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Forhåndsvisning innlasting
Tillatelse gitt for geolokalisering.
Påloggingsøkten din er utløpt og du har blitt logget ut. Logg på igjen.