Filter

Mine tidligere søk
Filtrer etter:
Budsjett
til
til
til
Skriv
Ferdigheter
Språk
    Jobbstatus
    43,719 furniture assembly jobber funnet, priser i USD

    Hi, I'm looking for someone for a unique writing project to create categories for a new website. MUST have EXCELLENT English writing skills. The website will have 4 categories. Non-categories Causes Good For the Planet Good For People Then the site will have the regular produ...the headline will be: Use our make-up if you’re going to be in front of the camera. For Good for People and candy (subcategory) the headline will be: Immigrant siblings started a candy business to help their family keep their home. For good for people and supplements (sub category) the headline will be: If you want to have a clearer mind, try our organic supplements. For non-categories and furniture (sub category) the headline will be: Looking for a couch to mesh well with a contemporary des...

    $94 (Avg Bid)
    $94 Snitt bud
    49 bud

    Hello, there is a logical wireframe-diagram ready for you to check for small manufacturing-assembly business. You need to check it, think about it from UX side and then complete UI in a most SIMPLE design possible without any unnecessary effects (shadows, transitions etc). It must be done in Figma. If it could be interactive, that would be amazing. Or at least arrows should point.

    $472 (Avg Bid)
    $472 Snitt bud
    59 bud
    Render me furniture and Jewellery 6 dager left
    VERIFISERT

    I have a successful ecommerce store looking for a designer for long term relationship, having 4 years hands-on experience of 3D modelling jewellery and furniture. Renderings and designing using blender or 3D Max is desirable. We need photorealistic renderings, ideal candidate is someone who can demonstrate they can 3D make and animate products to go on to an Ecommerce store. Preferable skills include 3D CAD modelling, animation, and rendering.

    $482 (Avg Bid)
    $482 Snitt bud
    44 bud
    contract essay 6 dager left

    ...materials and labour. Worried that the work would not be completed on time, Natalia sent an email to Phat Designs promising an extra £2000 for the work to be completed as agreed. That same month, Natalia’s brother-in-law, Olufeme installed a hot tub in the salon’s garden as a surprise for Natalia. On discovering this, Natalia promised to pay him £500. Natalia was also approached by a Patrina, a local furniture seller who had three salon chairs to sell. Natalia stated that they ‘must be chairs that can recline fully because I need to be able to line them up to the sinks when washing hair.’ Patrina assured Natalia that the chairs would recline fully and handed the order form to Natalia to complete. The extension of the salon was completed by 1st...

    $83 (Avg Bid)
    $83 Snitt bud
    27 bud

    I need an experienced designer to create full 3d flo...floorplan with arial view, and rendering of all rooms for my 3 bdrm 2 1/2 bath home remodel. I have the CAD drawings with all measurements and I have drawn my ideas of where to put furniture etc on the cad drawing. I just need to see how the project will look in a more realistic format so I know how much space I have in each room with furniture. Please ONLY bid accurate pricing you will charge for this full project. I added my CAD with measurements (ceiling is 8’ height); my idea sketching and I chat with me for photos that inspire the styles I like. I consider it simple project because I have already ideas of furniture placement etc. However I am willing to go slightly above the top of the budget for realis...

    $165 (Avg Bid)
    $165 Snitt bud
    87 bud

    we need AD radio voice for a furniture store in Mp4 format and ad roughly 30 seconds with background Music. Professional radio actor with pro voice. USA..................

    $25 (Avg Bid)
    Lokal
    $25 Snitt bud
    1 bud

    we need AD radio voice for a furniture store in Mp4 format and ad roughly 30 seconds with background Music. Professional radio actor with pro voice. USA

    $33 (Avg Bid)
    $33 Snitt bud
    12 bud

    Extra hours for organising file types due to the complexity of the project. Sub-assemblies within sub-assemblies within the assembly.

    $118 (Avg Bid)
    $118 Snitt bud
    1 bud
    sketchup project 6 dager left

    currently have floor plans of rooms and need to add optional furniture layouts and schematics

    $18 / hr (Avg Bid)
    $18 / hr Snitt bud
    65 bud

    Hello, I saw in your profile that you're experienced in assembly and C++. I'd like to know how much would you charge to have these functions converted to C++ code? List of function names that I need converted to C++: Here you can find the function bodies: I look forward to hearing from you.

    $20 (Avg Bid)
    $20 Snitt bud
    1 bud

    Hi, I am looking for Looking for Product Photoshoots for my Furniture Business. My business is in Kirti Nagar. Total Products around 50-60

    $232 (Avg Bid)
    Lokal
    $232 Snitt bud
    6 bud

    Bought the scooter where you rest an injured keg on cushion and push scooter around with other leg. Sp this project is to help total assembly of my knee scooter.

    $136 (Avg Bid)
    $136 Snitt bud
    16 bud

    I have to have a layout done of an exterior patio I will; need to layout a tile pattern , furniture , tables and benches , and also create wall elevations for 2 additional rooms I have all the measurements verified , I am an interior designer

    $19 / hr (Avg Bid)
    Viktig
    $19 / hr Snitt bud
    52 bud

    I have a house i designed on paper, its 3 storeys high, split levels, I need it put on a suitable CAD system so I can edit and view it on basic inexpensive software. If editing is not possible (re arranging furniture, changing decoration) then I would need it to be viewable in some form on inexpensive software or view in IE / Chrome browser. I would supply plans as scans with dimensions.

    $1120 / hr (Avg Bid)
    $1120 / hr Snitt bud
    21 bud
    $783 Snitt bud
    2 bud

    I have a house i designed on paper, its 3 storeys high, split levels, I need it put on a suitable CAD system so I can edit and view it on basic inexpensive software. If editing is not possible (re arranging furniture, changing decoration) then I would need it to be viewable in some form on inexpensive software or view in IE / Chrome browser. I would supply plans as scans with dimensions.

    $1078 (Avg Bid)
    $1078 Snitt bud
    90 bud

    In need of an interior designer. Some furniture has been bought but not all. For this house.

    $172 - $516
    Lokal
    $172 - $516
    0 bud

    In need of an interior designer. Some furniture has been bought but not all. For this house.

    $174 - $523
    Lokal
    $174 - $523
    0 bud

    I have 4 hand sketches of floor plans (total 5 rooms) each. I need it to be converted into flood plans with furniture to put it in a brochure (similar to the uploaded file) Note: it dose not need to be accurate it just need to look nice

    $124 (Avg Bid)
    $124 Snitt bud
    11 bud
    MCOS design 3 dager left

    An equipment which is available in physical form, needs to be designed in part & then assembly. Each part of equipment need to be measured and then plotted at Pro-E

    $271 (Avg Bid)
    $271 Snitt bud
    7 bud
    Furniture Designer 3 dager left
    VERIFISERT

    I am looking for an industrial designer to help me finalise the design of a new outdoor furniture product for commercial production. Experience in hotel furniture design and manufacturing would be advantageous, it would be great if you have experience in designing ergonomic furniture. It will be a new outdoor sunlounger for resorts and customers who want them for their own home. Its a cross between a beanbag and a sunlounger (ergonomic beanbag). I'm happy to pay for a bit of researching time too so they can understand the market I'm targeting

    $24 / hr (Avg Bid)
    Taushetspliktsavtale
    $24 / hr Snitt bud
    47 bud
    Heat pump 3 dager left

    We have P&IDs for CO2 water to water heat pumps. Our designer is sick with cancer and we need someone to do the assembly drawings.

    $356 (Avg Bid)
    $356 Snitt bud
    44 bud

    We need two things to be completed in this project: 1. Re-design an already collated/finished assembly manual and make it look professional. All the information & pictures provided are correct so there will only be a couple of minor changes like spelling etc. 2. Create a second assembly manual using the template/design of the first assembly manual. We have all the pictures & information for this but it hasn't been collated into an assembly manual, so you will have to do this. We will set this out very clearly on what goes on each page so it won't be hard to follow. I have attached the first assembly manual our logos and our brand guidelines, please follow these. I have also attached a few pictures you could use for the front cover. The...

    $62 (Avg Bid)
    Garantert
    $62
    4 bidrag

    Need an extra set of hands to unload a mattress, couch, table, and TV from a trailer into my apartment. No stairs, short walk, 15 minute job max. Time frame is tomorrow Aug 5 between 12:00 to 6:00pm

    $1370 (Avg Bid)
    Lokal
    $1370 Snitt bud
    2 bud
    Assembly language -- 2 3 dager left
    VERIFISERT

    Write an assembly language program that reads move review information from a text file and reports the overall scores for each movie as well as identifying the movie with the highest total score. There are four movie reviewers numbered from 1 to 4. They are submitting reviews for five movies, identified by the letters from “A” through “E”. Reviews are reported by using the letter identifying the movie, the review rating, which is a number from 0 to 100, and the reviewer’s identifying number. For example, to report that movie B was rated a score of 87 by reviewer 3, there will be a line in the text file that looks like this: B,87,3 The fields within each record are separated from each other by a comma. Your program must store the movie review scores in...

    $28 (Avg Bid)
    $28 Snitt bud
    5 bud
    Trophy icon Design the 55m^2 apartment remodel. Avsluttet left

    ...are as described on the attached image, need to leave them in place. Some doors may be closed off. Bathroom is as described on the picture, and we would prefer to leave it in place, but may consider moving it if it would significantly improve the space. The kitchen infrastructure is placed currently as is described in the model, but can be moved if necessary. I need a plan with walls and furniture placement. Attached a sketchup model and a plan screenshot of that model. ! Important ! Clarification 1: I want both bedrooms to have windows, please don't put a bedroom into the corner without light. Clarification 2: In the cabinet (2nd bedroom), no need to put a bed at this stage, only the computer table, a chair and a small bookcase. I would like the computer table to ha...

    $190 (Avg Bid)
    Viktig Garantert Forseglet
    $190
    23 bidrag

    Subframe redesign Control arms and fatigue strength FEA Upright design + FEA Push rod- bell crank design and assembly Wheel travel simulation and geometry validation

    $1507 (Avg Bid)
    $1507 Snitt bud
    1 bud
    Wine barrel logo 3 dager left
    VERIFISERT

    Looking for someone to help design a start up ( hobby ) company logo/branding. I buy used wine barrel, disassemble them then make furniture and Decor items with the parts ( chessboard’s, wine racks, stool’s, clocks, etc. I have a few ideas to help with where I want my branding going but need someone to develop it into useable files and templates for business cards, web page, social, cad etc. #note Attached are some examples of what I’m doing.

    $45 (Avg Bid)
    $45 Snitt bud
    109 bud

    Hi Guillermo Fabian M., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I have the furniture purchased already but I would like to give the room life with decor pieces, possibly wall paper or decal, art pieces and more. I would like you to interior design the room to show how it would look with the furniture pieces and suggest decoration and possibly additional furniture pieces if needed. I would like 2-3 options, and a brown/beige color.

    $150 (Avg Bid)
    $150 Snitt bud
    1 bud

    Almost 1200 square covered area tentatively drawn on rough paper aling with open green space and parking space and furniture placement .

    $10 (Avg Bid)
    $10 Snitt bud
    42 bud
    Trophy icon Evolution of Society - ARTWORK 3 dager left

    ...* Think farmers. Starting to see the mechanization of processes (machines). Left side of the image should show the hunter-gathers finding plants and learning to cultivate them. In the middle of the scene, you would see farms and people plowing the land. On the right side, you see the introduction of tractors and machines on the farm. ### Society 3.0 *industrial age.* Think of printing press, assembly lines with machines, and bigger machines for everything. Mass production. Industry 1.0+2.0 start ### Society 4.0 *information age - the one we are living in now.* We've started connecting to each other over the internet. But information is unevenly distributed. Technology is secondary to everything. Automation with robots. Emergence of Artificial Intelligence. Industry 3.0 st...

    $330 (Avg Bid)
    Garantert Forseglet
    $330
    20 bidrag

    Logo should be simple font logo with BF. Color: Red, Blue, White

    $40 (Avg Bid)
    Garantert
    $40
    187 bidrag
    conservatory interior design 1 dag left
    VERIFISERT

    We would like to get a new nterior design for our conservatory with new furniture and design

    $389 (Avg Bid)
    $389 Snitt bud
    78 bud

    The Scope of work is to prepare all Interiors Working drawings for a corprate office, a detail SKp file will be provided for the approved design. The freelancer should be able to provide All drawings in either AutoCAD format or Sketchup Layout format. The deliverable drawings will be 1) Furniture Plan 2) Flooring Plan 3) Civil Lineout Drawing 4) Furniture LIneout Drawing 5) RCP 6) Utility Coordination Drawing 7) All Sectional Elevations 8) Toilet Details 9) Door and Window Details 10) Furniture Details All drawing should be in pre-defined layers and format which will be provided by us Enclosed find Screen shot of the SKP file. Final SKP file will be provided to selected freelancer.

    $286 (Avg Bid)
    $286 Snitt bud
    24 bud
    Apartment 1 dag left

    i purchased a new apartment in Bahrain and i would like to do modern internal design for it , by utilizing the local furniture supplies in Bahrain. The apartment having 3 rooms can have queen bed and one single bed . the apartment in blue color in the attached plot plan

    $125 (Avg Bid)
    $125 Snitt bud
    28 bud

    Home refurbishment with many changes…. It’s a villa that needs To be redesigned. 3 floors, with proposed layout changes, furniture placement, lighting, Bedroom / bathroom elevations. Landscaping is shown on plan.

    $954 (Avg Bid)
    Taushetspliktsavtale
    $954 Snitt bud
    47 bud

    Drawing needed of Sofa, Chair and Table for production company. The measurements are also given.

    $143 (Avg Bid)
    $143 Snitt bud
    92 bud

    Hello, I’m looking to work with somebody knowledgable in online marketing on a commission basis. I made a turnover of £330,000 on Etsy within a year and decided to sell those same proven products through a Shopify E-commerce store called “Earthy Interiors” (It is a furniture store). I had 700+ views of targeted traffic per day through Etsy and would like someone to bring that amount into the Shopify store with the methods they see fit. If you think your suitable I would love to hear from you. Warm regards, Alex Williams ORPHICCOMMERCE LTD

    $60753 (Avg Bid)
    $60753 Snitt bud
    15 bud

    I am trying to have someone create 3d designs for my home remodel. I have the CAD drawings with all measurements and I have drawn my ideas of where to put furniture etc on the cad drawing. I just want to see how the project will look in a more realistic format like a 3d rendering. Colors grey, white with accent black walls in den and mbr.

    $164 (Avg Bid)
    $164 Snitt bud
    63 bud

    A code converter is a software that is used to convert codes (data) from one programming language to another. There are many different types of code converters but the most popular ones are for converting from a high-level programming language like JavaScript or Python to a low-level language like C or Assembly. The code converter can be used for various purposes such as converting a binary file into ascii text or decimal into hexadecimal or hexadecimal to binary file. Alright the job here is simply convertion of some ascii text into binary file, more information will be sent to you as we proceed further with the project. Interested candidates should kindly contact our company administrative team member via telegram @DebraMcCann. For further information on the project and payment de...

    $2024 (Avg Bid)
    $2024 Snitt bud
    20 bud

    What I have to do: Furniture 3d models: 7 beds and 15 sofabed Project duration: 2 weeks from the assignment (Expected delivery date 21 August) Technical details: -No low poly models -Each model has to be accurate in softness padding, sewings, materials texture and accessories. -Minute details (for example small creases) will need to be reproduced for total realism. -Each 3d model has to include bed/sofa accessories like sheets, pillows, goose, bed cover, plaid cushions. Input of the project: -HD .tiff file of the model to reproduce -Dimensions of the model -600 dpi fabric for CGI texture creations Output of the project (what has to be delivered for milestone release): -Overall source 3d file with texture and lights -Front view 6k RGB/CMYK .tiff file -Lateral view 6k .tiff file ...

    $500 (Avg Bid)
    $500 Snitt bud
    67 bud

    Small Villa 280 m2 divided into ground floor, first floor and small roof. It is townhouse, i.e. there is another villa attached to it. Site area is 200 m2. I.e. there is a corridor of about 2.0 m.s wide around 3 sides of the Villa. The Villa is furnished with some furniture but not complete. It is about 80 % furnished. There is no drawings available (plans, elevations, ...etc ). Therefore, the ID has to take measurements and get the required information himself. We are seeking Interior Designer to develop interior design for the Villa. He has to be based in Cairo with good experience in Modern Design. Please provide samples of previous works

    $1021 (Avg Bid)
    $1021 Snitt bud
    60 bud
    Furniture designer 20 dager left

    Looking for furniture designer who can develop furniture families.

    $86 (Avg Bid)
    $86 Snitt bud
    19 bud
    Need an expert in assembly 14 dager left
    VERIFISERT

    C to assembly conversion using grcc 32-bit (intel)

    $15 (Avg Bid)
    $15 Snitt bud
    9 bud
    Logo design 13 dager left

    I need a logo designed for my office rubbish removal business. We remove unwanted office furniture and office rubbish, we a core focus on repurposing the office furniture.

    $25 (Avg Bid)
    $25 Snitt bud
    215 bud

    Looking for a short single word (ideally 4-7 characters) or 2 short words business name for an Australian furniture brand. I love the names Dizain and Zalu but I have used them already. Please don't use these in the bid, but they give an idea of words I like. In the past I have sourced inspiration from Mediterranean beach names such as 'Balos' or relatable words in another language. I highly resonate with all things Italian and the business will be located in a beachside town. I really like words that include the letters Z, T, K, L, M, N, U, A The furniture brand will be pieces for 'your future vintage heirlooms'. Mid century style. I would potentially consider adding the word 'studio' into the name. Thank you and goodluck!

    $69 (Avg Bid)
    $69
    242 bidrag

    Looking to render a home exactly as the plans show. I have elevations, floor plan & electrical plan. Would ask that you include furniture & finishes. Sketchup -> Lumion Preferred

    $938 (Avg Bid)
    $938 Snitt bud
    146 bud

    We sell high-end cat furniture that looks beautiful in your home rather than sticking out like an eyesore. All furniture we create is supposed to look like a piece of decor and 100% functional for cats to use. Our website is maupets.com. We are looking for somebody who could 1) bring our ideas to life and 2) present concepts of new products for us to choose from. We are looking for somebody who we can work together with long term. Budget is flexible and depends on deliverables our website - Before product creation, we would like the first project should consist of product research and concept development.

    $750 - $1500
    Forseglet
    $750 - $1500
    40 bud

    Looking for an email list of companies related to Large Part Machining, Large Format Machining, Large Milling, Large Turning, Large Lathe, Large Diameter Turning, Large Footprint Machining, Pin assembly suppliers from the USA. Send me a sample of your works Thanks

    $9 / hr (Avg Bid)
    $9 / hr Snitt bud
    37 bud

    We have ESP32 Based Gateway and it is ready for Production. we are looking for someone who can support us during fabrication and assembly process. if minor changes needed in PCB during manufacturing process than you have to take care of it. we will provide you all PCB related documents. if you have any query than please feel free to contact me.

    $116 (Avg Bid)
    $116 Snitt bud
    18 bud

    Topp furniture assembly artikler