Electronics jobber

We have a couple of l electronics brands on Amazon and already have Sponsored Products and Sponsored Brands campaigns running. We want to boost the Sales growth d, so I want a fresh set of eyes to audit what’s live, tighten the structure, and then scale the winning keywords and placements. We are looking some Amazon PPC Expert now it inside out. Here’s what I need: • Full account audit with a written summary of current performance, wasted spend, and immediate quick-wins. • Re-structured campaigns (Sponsored Products, Sponsored Brands; DSP only if you feel it will add lift) built around proven keyword research and competitor insights. • Ongoing bid and placement optimization focused squarely on increasing sales while holding or lowering ACOS/ TACOS...

Hello , I need a complete design for a compact consumer-electronics board that revolves around a PIC microcontroller. The scope spans three tightly-linked parts: • PCB hardware – Produce the schematic and multilayer layout in Altium Designer, include all libraries you create, and deliver the full manufacturing package (Gerbers, drill files, pick-and-place, and a PDF schematic). • MCU firmware – Write well-commented code in MikroBasic (or another PIC-friendly tool if you justify the switch). The firmware must read multiple sensors, exchange data through an efficient serial protocol, and use smart power-saving modes to stretch battery life. Please supply project files, compiled HEX, and a short flashing guide. • PC interface – Build a Windows utility...

I need clear, technically-accurate product descriptions for a range of consumer electronics. Each text must read like it belongs on a spec-driven retail page—precise wording, no marketing fluff, and enough engineering detail to satisfy informed shoppers. Scope You will receive a list of electronic items along with basic specs and any manufacturer data sheets I can supply. From that material, craft concise copy that highlights key features, explains core technology in plain terms, and anticipates common pre-purchase questions. Deliverables (per product) • 120–180-word main description • 4–6 bullet-point feature list • Tabular spec section (model number, dimensions, weight, power, connectivity, etc.) • Optimised file delivered in eithe...

I need a complete design for a compact consumer-electronics board that revolves around a PIC microcontroller. The scope spans three tightly-linked parts: • PCB hardware – Produce the schematic and multilayer layout in Altium Designer, include all libraries you create, and deliver the full manufacturing package (Gerbers, drill files, pick-and-place, and a PDF schematic). • MCU firmware – Write well-commented code in MikroBasic (or another PIC-friendly tool if you justify the switch). The firmware must read multiple sensors, exchange data through an efficient serial protocol, and use smart power-saving modes to stretch battery life. Please supply project files, compiled HEX, and a short flashing guide. • PC interface – Build a Windows utility in ...

I need an experienced electronics/PCB engineer to design a reliable, 24/7-operating traffic light controller PCB. This is a safety-critical system (not a hobby project). • Load: 220VAC traffic light LED modules • Operation: Continuous (24/7) • Experience with ESP32 hardware • Experience with AC mains / industrial electronics • Comfortable designing fail-safe systems • easy eda check image . PCB1 is main and then i can connect few pcbs like pcb2

I have a full dyeline and a set of reference images and designs for a freestanding retail display that will showcase our product range. I now need every visible panel ‑ front, sides, header, ‑ fully designed so the stand grabs attention and drives product sales. The stand’s sole purpose is to promote the product range, with a quick-scan approach. I already have high-resolution imagery, feature copy and the exact dimensions; what I’m missing is your creative treatment that pulls it all together into one cohesive look. It doesnt have to use images, but show are products like in a brochure. Please work directly on the supplied dyeline, keeping a green edge around the board of all the 3 bottom sides Once approved, I’ll need: • A print-ready PDF for each panel &bull...

I need a clean, well-structured catalogue that showcases my full line of electronics across seven or more product categories. The goal is to inform potential buyers about each item’s key specifications rather than push a hard sale, so the layout must balance concise tech details with plenty of white space and clear imagery. I will supply product photos and specs; you organise them into a logical category flow, apply consistent styling, and deliver a print-ready PDF plus the editable source file (Adobe InDesign or Illustrator preferred). Pagination, typography, icon use and colour palette should all reinforce a modern tech aesthetic while remaining easy to read. If you have ideas for subtle infographics or comparison tables, feel free to suggest them—anything that hel...

...PCB Design for Smart Ring Wearable I’m developing a compact smart ring device and need an experienced PCB engineer to design a rigid-flex PCB. The design includes: A flex PCB section (polyimide) that wraps around the inner circumference of a ring Two gold-finished contact pads on the flex section that interface with the user’s finger A rigid PCB section that connects to the flex and hosts electronics Scope of work: Design a single-piece rigid-flex PCB Flex section with exposed ENIG pads (dimensions and spacing will be provided) Proper coverlay usage and manufacturable rigid-flex stack-up Clean routing of high-impedance analog signals from flex to rigid section Mechanical alignment features and reliable rigid-flex transition Requirements: Proven experience...

I manage two busy TikTok + Facebook pages—one for consumer electronics and one for sporting goods—and I want all of our raw photos, clips, and testimonials turned into scroll-stopping graphics and short videos on a monthly, salaried basis. For the electronics page, the priority is polished product-review creatives, but you’ll also reshape our happy-customer snaps, unboxings, and promo shots into a consistent look using reusable templates. For the sports line, eye-catching product-advertisement content comes first, with room to experiment around launches or seasonal pushes. The day-to-day flow is simple: you’ll pull incoming assets from a shared Drive, sort them into clear folders, then design or edit pieces sized correctly for TikTok feeds, Stories, ...

...to a manufacturing partner. Required Qualifications: Fluent English: Must be able to communicate complex technical concepts clearly on calls. Consumer Appliance Experience: Proven track record of designing household products involving food-grade liquids, heating/cooling elements, or pressurized systems. Multi-Disciplinary: Capable of handling the mechanical design (SolidWorks/Fusion360), electronics (PCB design for high-current Peltiers), and firmware (C/C++). OR partner closely with someone who has these skills (i can hire for this) Safety Compliance: Experience designing systems that handle hot water/steam sterilization safely. To Apply: Please share 2-3 examples of hardware prototypes you have built from scratch. Specifically, highlight any projects involving thermodynam...

I am looking for an experienced electronics engineer/PCB designer to create a custom carrier board (or fully integrated PCB) for a smart beekeeping monitoring system. The device will monitor two beehives simultaneously and transmit data via LoRaWAN to the "Beep" platform. Project Scope: The goal is to design a PCB that handles power management and interfaces with multiple sensors for two separate hives. The device will be powered by a Solar panel and a Li-Ion/LiFePO4 battery. Core Components & Requirements: Microcontroller & Connectivity: Based on ESP32 with LoRaWAN capabilities. Preference: You can either design around a module (like ESP32-WROOM + RFM95) OR design a carrier board for a dev-board like the Heltec WiFi LoRa 32 V3 (to simplify...

I need an experienced electronics/PCB engineer to design a reliable, 24/7-operating traffic light controller PCB. This is a safety-critical system (not a hobby project). SYSTEM: • MCU: ESP32 • Load: 220VAC traffic light LED modules • Outputs: ~19 relay-controlled channels • Operation: Continuous (24/7) RELAY CONTROL: • Relay outputs driven via 74HC595 shift registers (SPI-style) • 3 × 74HC595 chained • OE pin must have hardware pull-up (outputs OFF at boot) • ESP32 enables outputs only after startup • Relay drivers with proper flyback protection FAILSAFE / SAFETY: • Master relay/contactor that cuts power to ALL lamp outputs • Must drop on: - ESP32 crash - Watchdog timeout - Power instability • Safe power-up a...

I am building an indoor lifting system that needs its own custom hydraulic valve. The unit must modulate acceleration, controlled slowing, and positive stopping in both lifting and lowering directions, yet remain entirely manual in operation—no electronics or remote triggers involved. Key design parameters • Pressure range: 10 – 60 bar • Flow range: 20 – 100 L / min • Body material: aluminum (for weight and corrosion resistance) I am looking for a complete engineering package that covers hydraulic sizing, spool geometry, spring rates, flow-control metering notches, and seal selection so the finished valve behaves smoothly through the whole stroke. A 3-D CAD model and fully toleranced manufacturing drawings are essential, backed by calcula...

My new electronics shop measures 16 ft × 27 ft and is already divided into a front retail zone and a back service zone. I need a space-optimised, modern design that instantly pulls customers toward a dedicated iPad & laptop display—the hero area of the store. What I’m after • A bright, vibrant look and feel that reinforces a tech-forward brand without sacrificing practicality. • Clean sightlines and plenty of under-display storage shutters so we can keep stock on hand yet out of view. • A clearly organised accessories wall or rack system. • A neat POS demo corner where payment terminals can be tried and tested. • A fully private repair area that remains completely hidden from customers. • A small conversation desk with...

I need a modern, 15–20-page catalog that showcases my electronics line in a sleek, visually engaging way. Each product page should balance strong imagery with clean typography and consistent branding, following a contemporary, tech-focused aesthetic. Deliverables • 15–20 print-ready pages laid out in Adobe InDesign (or comparable professional tool) • For every product: – Product specifications clearly formatted – Concise usage instructions set apart for easy reference • High-resolution, press-ready PDF plus editable source files • Cover design, contents page, and logical section breaks to guide readers Once I provide product photos, specs, and copy, I’d like initial layout concepts within a few days, then one revisi...

We are seeking an experienced technical writer with a solid background in electronics to update and improve the instructional documentation for our DIY Bluetooth Speaker Kit. The kits, used in schools and STEM programs, include pre-assembled circuit boards and require basic soldering skills to assemble. The documentation must support both the electronics assembly process and provide guidance for student customization. Responsibilities include: - Revising existing instructions for clarity, especially for beginner-level enthusiasts. - Simplifying technical explanations to be accessible for Year 10 students. - Updating the Bill of Materials (BOM) with precise detail. - Enhancing wiring diagrams with clear labels suited for basic soldering practices. - Including step-by-step v...

...in Gitega, you never pay a listing fee. The Platform Before applying, all candidates MUST visit our official platform at to familiarize themselves with our interface and categories. We focus strictly on the local needs of our citizens: Automotive: Safe trading of vehicles with local license plates. Real Estate: Commission-free rentals and sales in local neighborhoods. Electronics: A trusted hub for second-hand phones and laptops. Jobs: Connecting local artisans and professionals with employers. Role: Country Representative We are looking for passionate individuals based in Rwanda (Kigali, Huye, Musanze) or Burundi (Bujumbura, Gitega, Ngozi) to act as the face of Isokorusange. Key Responsibilities: User Verification: Help us verify that sellers are real people to keep

...part of the watch (bezel + glass + dial) can spin manually like a spinner. The lower case and watch hands are fixed. Spinning is locked by default. When the user pulls the upper part upward (lift trigger), the lock is released and the upper part can spin. When the user pushes it back down, spinning is locked again. This is a purely mechanical system (no motor, no spring-driven spin, no electronics). The goal of this project is to design the mechanism, produce engineering drawings, and prepare manufacturing-ready documentation so I can prototype and mass-produce the watch in China. Core Functional Requirements (Must-Have) 1. Locking System Rotation is mechanically locked when the upper part is in the down position. Lock is released only when the user pulls the upper assem...

...compact PCB whose only job is to collect data from several temperature sensors and route those readings to the rest of my prototype through simple wired connectors. Everything must be laid out and modelled inside Fusion 360, right down to the housing that will protect the board once it is fabricated. Here is what I need from you: • Create the full schematic and board layout in Fusion 360’s electronics workspace, optimised for straightforward sensor-integration and robust wired headers. • Export clean Gerber/Drill files plus the native Fusion 360 design so I can iterate later. • Model a 3-D printable enclosure in the same project file, dimensioned precisely to the finished PCB, with openings for the temperature-sensor cables, mounting holes and a snap-f...

Project Brief: Stealth-Modified Automatic Parking Disc (Certified for Pu...automatic. No user interaction should be needed after parking. • No visible alterations (e.g., wires, unusual controls, abnormal movement patterns). • Power should remain efficient — preferably still battery-powered or with a hidden upgrade that doesn’t draw attention. Ideal Freelancer Profile: I’m looking for someone with experience in electronics, microcontroller programming (e.g., Arduino), or embedded systems. Ideally, you’ve worked with consumer electronics, automotive modifications, or smart devices before. Both functionality and stealth are equally important for this project. ⸻ Let me know if you have questions or need specific details (such as device model...

...shop focused on consumer electronics and gadgets and need a full-featured e-commerce site built from the ground up, polished, and ready to accept orders. The store has to showcase products in a clean, modern layout, let shoppers add items to their cart, move through a secure checkout with major payment gateways, and track orders in an easy-to-use account area. A responsive design is essential so the experience feels the same on phones, tablets, and desktops. I’ll supply branding, product images, and copy; you’ll handle the build, set up taxes and worldwide shipping rules, connect payments, and test every step so launch day is trouble-free. When you respond, put the spotlight on your experience creating e-commerce sites—especially any work you’ve done for...

1. Purpose This document defines the functional and non-functional requirements for developing a RetailMan-style Point of Sale (POS) system designed for retail businesses operating multiple branches, each running offline, with multiple terminals, multiple stock locations, and credit sales support. The system must be fast, reliable, offline-first, and suitable for supermarkets, electronics stores, hardware shops, and similar retail environments. 2. System Overview Each branch operates independently on its own local server and LAN. Multiple cashier terminals connect to the branch server. The system works 100% offline at branch level. A future sync module will allow consolidation between branches when internet is available. 3. Architecture Requirements 3.1 Deployment Model Bra...

...for You" based on view history. If new, show "Trending Now" (based on click-through rate). Flash Sales: A dedicated section with a countdown timer for time-sensitive deals. 2. Advanced Search & Discovery: Fuzzy Search: The system must handle typos (e.g., searching "Iphne" should find "iPhone"). Dynamic Filtering: Filters must change based on category (e.g., "Clothing" shows Size/Color; "Electronics" shows RAM/Storage). 3. Complex Cart & Checkout (Critical): Split-Order Logic: If a customer buys Item A (from Vendor 1) and Item B (from Vendor 2), the system must generate one Parent Order ID for the customer, but split it into two Child Order IDs in the backend. Payment Gateways: Integration of Cash on Delivery (C...

I need a bank of highly detailed, realistic prompts that can be dropped straight into mainly for FREEPICK, Midjourney, Stable Diffusion, or DALL·E to generate commercial-grade images for my Amazon listings. The products in scope are electronics accessories—primarily mobile covers and tempered glasses—so each prompt has to highlight texture, ports, and overall fit with crisp, shadow lighting that meets Amazon’s pure-white background requirement. Here’s what will make the engagement successful: • Craft prompts that reliably output 3000-px-plus, photorealistic renders showing front, back, angled and lifestyle compositions of the product. • Include any seed settings, aspect ratios, negative prompts, or modifier tweaks you use so I can reprodu...

Mohammed Hamed I am a Master’s researcher working on a GaN-based Current Source Inverter (CSI) for photovoltaic systems. I already have a working SVM control model in MATLAB/Simulink and a partial inverter structure. I am looking for a highly experienced MATLAB/Simulink Power Electronics engineer to professionally upgrade and restructure my model into a full physical Simulink/Simscape CSI system suitable for IEEE-level academic research. Scope of Work: • Convert inverter power stage into physical transistor-based Simscape models (GaN / SiC) • Integrate existing SVM control algorithm • Implement realistic DC-link current source and EMI-aware switching network • Verify losses, stress, and harmonic performance

Working from our previous project, this step is to get the Wand electronics fully functional, this may require a second round of prototype hardware and then a final modified version of the hardware based on the feedback of the industrial designers of the enclosure (likely changing in wiring and plugs to suit production). Also included is the eLARP software conversion now to run on the Wand hardware. 1) Addressable LED's 2) Accelometer 3) Vibration Motor are all new on this platform.

Project: Election Campaign-Themed Electronic Package Design Project Overview: We are seeking a talented and politically savvy freelance graphic designer to create a visually compelling and impactful package design for an electronic device. This is not a standard commercial package—it will function as a miniature election campaign poster, featuring the image, branding, and key messaging of a political candidate. The goal is to design packaging that immediately communicates the candidate's identity and platform, generates excitement, and leaves a lasting impression on recipients, much like a classic campaign sign or flyer. Key Requirements & Responsibilities: · Transform the provided cutline (structural dieline) of the electronic package into a vibrant, campaign-foc...

I’m putting together a small interface that lets a 5 V logic line drive a 12 V DC mechanical relay while keeping the control electronics completely isolated from the field wiring. My plan is to repurpose an off-the-shelf two-channel relay module for the load side and pair it with a standard optocoupler breakout on the control side; you can choose whichever optocoupler best meets the brief as long as it fits the isolation goal. What I need from you is a concise, ready-to-build circuit design: • A clear schematic showing the 5 V input network, the optocoupler stage, any necessary current-limiting or pull-down components, fly-back diode protection for the 12 V coil, and the wiring to the relay board. • A bill of materials with exact part numbers so I can order everyth...

I’m building a wearable exoskeleton and need a dedicated PCB that brings all core electronics onto one compact board. The board must integrate: • Microcontroller • DC-DC converter • LDO regulator • IMU • Operational Amplifiers • JTAG header • All required connectors for power, sensors, and external actuators Scope of work 1. Schematic capture with component selection that balances size, efficiency, and heat dissipation. 2. PCB layout optimized for a tight wearable form factor—minimal footprint, clear signal integrity, and robust grounding. 3. Generation of manufacturing deliverables: Gerber files, assembly drawings, pick-and-place files, and a complete BOM. 4. Design review iteration to address any EMI/EMC or rou...

I run a retail electronics store and I’m ready to reach shoppers both here and overseas by turning social media into a reliable sales engine. I need a clear, actionable strategy and hands-on support that will help me build genuine relationships with potential customers, showcase my products, and convert engagement into measurable revenue. What I’m looking for: • A data-driven social media plan tailored to electronics retail, showing how we will attract, engage, and retain followers at home and abroad. • Profile optimisation or setup on the platforms you recommend (the obvious starting points are Instagram, Facebook, TikTok or any other channel you can prove will work for electronics). • A 90-day content calendar that mixes product spot...

I need a complete WordPress shop built in Arabic that can handle a broad mix of physical goods—the concept is a general-store, so the catalog will range from fashion items to small electronics and home accessories. The site must be fully localized: all front-end text, checkout screens, email notifications, and any plug-in labels should display in modern standard Arabic. 6 pages home page product page category page checkout page thank you page privacy policy page budget 22$

I'm seeking a skilled web developer to create a modern and sleek e-commerce website for my home appliances and electronics company. The site should be user-friendly and visually appealing, with the following key features: - Product search and filters - User reviews and ratings - Secure payment gateway Ideal skills and experience: - Proven experience in developing e-commerce websites - Strong design skills for modern and sleek aesthetics - Expertise in integrating secure payment gateways - Ability to implement product search and filter functionalities - Familiarity with user review and rating systems I look forward to working with a professional who can bring my vision to life.

...print and ship the prototype parts (or print locally and provide proof of fitment with photos/video). • Prototype material can be standard (FDM) for fit checks; we’ll iterate as needed. What I Will Provide • Facemask STL / measurements (or I can ship a sample facemask if needed) • Reference photos and placement requirements • Any internal component envelope constraints (camera module + electronics packaging targets) Skills Needed • Mechanical Design / Product Design • SolidWorks or Fusion 360 (or similar) • 3D printing + prototype iteration • Experience with mounts, enclosures, impact-resistant parts is a big plus To Apply (Please Include) 1. Examples of similar mechanical CAD work (mounts, enclosures, wearables, sports ge...

I need good electronics engineer to help me capture schematics in Altium from a reference design, I will provide you BoM and PDF I need Altium schema files without footprints Most components are available on vault so you need to just put them and create symbols for components rarely must have Altium license with vault access Can use altium manufacturer part search and BoM management is available to do complete project in 5 days Indian (Please no Pakis & Bangladeshi) Can provide regular updates on work progress

I’m a PhD holder with a core background in Electronics and Communication Engineering and I’m on a career break. My goal is to transition into reliable work-from-home roles, ideally centred on teaching and tutoring. I need clear, actionable advice as soon as possible—something I can start putting into practice right away rather than a broad, generic overview. Here’s what I expect from you: • A brief skill-gap analysis that maps my current qualifications to in-demand remote opportunities. • A prioritised roadmap of new or complementary skills I should acquire, including recommended online courses, certifications, or platforms (Think Coursera, edX, Udemy, LinkedIn Learning, etc.). • Specific guidance on monetising these skills through remote ...

I’m launching a dedicated Amazon Brand Storefront for my electronics line and need someone who can take it from blank slate to live, shopper-ready destination. All core branding assets—logo files, product shots, lifestyle images, and colour palette references—are organised in a shared drive and ready for you to drop in. What I’m after is a clean, conversion-minded layout that spotlights our individual product listings while weaving in a concise brand story section to give customers a feel for our mission and design philosophy. You’ll handle page structure, copy placement, image optimisation, and any A+ content blocks needed to make the storefront feel cohesive and on-brand. Deliverables • A fully built Amazon Brand Storefront published to my Sell...

I'm looking to create an e-commerce site specializing in selling electronic products. The site should have the following features: - Product Reviews - Wishlist - Product Comparison Ideal skills and experience: - Proven experience in developing e-commerce websites, especially in the electronics sector. - Strong UI/UX design skills to ensure a user-friendly shopping experience. - Knowledge of integrating product review systems, wishlists, and comparison tools. - Familiarity with SEO best practices to enhance site visibility. - Ability to provide post-launch support and maintenance. Please include examples of previous work and any relevant certifications.

• I need an automatic LED control solution that switches my lights according to two conditions: ambient daylight levels and nearby motion. In practice, that means the system must remain ON while there is enough natural light, turn OFF whenever it gets dark, and also turn ON immediately when someone approaches, regardless of the time of day. Once the area is ...threshold and motion sensitivity Acceptance Criteria • LEDs stay ON in daylight and OFF at the desired darkness level after dark regardless of Distance sensor input. • LEDs turn on with input from distance sensor at night when ambient light has LED's turned OFF. • No flicker or false triggers under typical indoor lighting changes. • All documentation is concise and ready for someone with basic e...

...a mechanical designer who can take the idea from sketch to production-ready CAD using SolidWorks. The goal is an engaging educational robot—think classroom-safe, modular, and easy to assemble—that physically demonstrates code in action (moving, gripping, lighting up, etc.). I already know what the electronics will do; what I’m missing is the full mechanical package: chassis, actuators and sensor mounts, snap-fit or screw-together panels, wire-routing, and anything else that turns the electronics into a robust teaching tool. Key expectations • Work entirely in SolidWorks, supplying all native files alongside STEP/IGES exports • Develop the full 3-D model, sub-assemblies, and exploded views ready for DFM/3-D printing or light CNC work &bul...

I am looking for an electronics hobbyist, student, or trainer to create 10 short practical video tutorials (8-10 mins each) on basic IoT/Electronics topics. Project Requirement: You must record your REAL HANDS using a physical kit (Arduino, Raspberry Pi, or similar). NO AI Avatars allowed. Real physical demonstration is mandatory. Face cam is NOT required. (Top-down view of hands + kit is perfect). English Voiceover required (Clean audio, can be AI-polished but must match the video). Video Topics (Choose any 10): Blinking an LED with Arduino Using a Breadboard & Resistors Reading Temperature (DHT11 Sensor) Controlling a Servo Motor Using a Push Button as Input Soldering a basic component (if you have tools) Interfacing an LCD Display Ultrasonic Distance Sensor Introduc...

...lighting—no power or water hookup is guaranteed on-site. Scope of work • Exterior – foam pre-wash, hand wash, clay treatment, light machine polish, sealant or wax, and tyre/wheel finishing. • Interior – vacuum, steam or shampoo where needed, plastics and leather treated, windows spotless, odour neutralised. • Engine bay – degrease, rinse or wipe-down as appropriate, plastics dressed and all electronics left safe and dry. I’m based within the city limits and can make the car available any day next week. Completion time should be the same day; please advise if you foresee otherwise. When you reply, include clear before-and-after photos from past full-detail projects so I can gauge workmanship. A brief outline of the products and...

I need a skilled professional to apply my vector logo onto various electronic products. The products include speakers, headphones, and earbuds. Requirements: - Experience with logo application on electronics. - Proficiency in handling vector files. - Attention to detail and precision. Ideal Skills: - Graphic Design - Product Branding - Familiarity with electronic product surfaces Please provide examples of similar work.

...car) with the system logic Conduct system testing, debugging, and validation Ensure all components (hardware, software, IoT devices) run together smoothly Provide on-site demo support during February (up to 5 days) Suggest iterations, optimisations, and technical solutions during testing Assist with troubleshooting during setup and initial runs Required Skills & Experience Strong background in electronics engineering Experience with IoT setups, sensors, triggers, and controllers Familiarity with app installation, system configuration, and integration Hands-on experience with testing, debugging, and hardware-software integration Ability to quickly diagnose issues and propose practical solutions Experience with interactive installations, events, or experiential setups is a plu...

I need a wearable device to detect sleep-time bruxism. Requirements: - Monitors muscle activity. - Alerts with sound when clenching. - Collects clenching duration and frequency data. - Must reside in india ( bangalore) Ideal Skills: - Arduino/ESP32 development - Python/TensorFlow Lite (microcontrollers) - Embedded systems & electronics (mic setup, signal processing) Hardware can be procured by me or reimbursed. Urgent requirement

This project is designed to guide a product smoothly from sourcing to selling, combining reselling, order creation, marketing, and customer engagement into one powerful and easy-to-manage flow. Step 1: Reselling Made Simple We begin by sourcing quality products from reliable suppliers and preparing them for resale. Each item is thoughtf...₹300,000 at the end of the month. Growth, dedication, and performance are directly rewarded. Step 8: Wide Range of Product Categories The project supports multiple categories to attract a broad audience, including: Men’s & Women’s Clothing (stitched and unstitched) Kids’ Clothing Kitchen Accessories Home Accessories Shoes & Footwear Home Décor Branded Products Books Perfumes Bags Electronics Fitness ...

I'm looking for a skilled electronics engineer to design a small circuit board for a home appliance. Requirements: - Use a 0.05 hp motor - 12V 600DC connector - Incorporate a push button switch - Add LED indicator - Include speed control functionality Ideal Skills and Experience: - Experience with circuit board design - Familiarity with motor control and home appliance electronics - Proficient in integrating LEDs and speed control mechanisms Please provide relevant experience and examples of similar work.

This project is designed to guide a product smoothly from sourcing to selling, combining reselling, order creation, marketing, and customer engagement into one powerful and easy-to-manage flow. Step 1: Reselling Made Simple We begin by sourcing quality products from reliable suppliers and preparing them for resale. Each item is thoughtf...₹300,000 at the end of the month. Growth, dedication, and performance are directly rewarded. Step 8: Wide Range of Product Categories The project supports multiple categories to attract a broad audience, including: Men’s & Women’s Clothing (stitched and unstitched) Kids’ Clothing Kitchen Accessories Home Accessories Shoes & Footwear Home Décor Branded Products Books Perfumes Bags Electronics Fitness ...

This project is designed to guide a product smoothly from sourcing to selling, combining reselling, order creation, marketing, and customer engagement into one powerful and easy-to-manage flow. Step 1: Reselling Made Simple We begin by sourcing quality products from reliable suppliers and preparing them for resale. Each item is thoughtf...₹300,000 at the end of the month. Growth, dedication, and performance are directly rewarded. Step 8: Wide Range of Product Categories The project supports multiple categories to attract a broad audience, including: Men’s & Women’s Clothing (stitched and unstitched) Kids’ Clothing Kitchen Accessories Home Accessories Shoes & Footwear Home Décor Branded Products Books Perfumes Bags Electronics Fitness ...

...Well-documented STM32 firmware source code. 2. A clear protocol reference (frame layout, timing, byte ordering, command set). 3. Representative UART and UDP test logs that prove acquisition and network transport under realistic conditions. 4. A short integration guide so my team can drop the firmware into our production board with minimal effort. Experience with sonar, DSP, or marine electronics is highly desirable; if you have past work with range-focused signal chains, let me know. I’m looking to kick this off as soon as possible, so please outline your approach, toolchain familiarity, and any relevant hardware you can use for bench testing....

...electronic product (a sensor) that is hand-held (size: like a USB stick, or a as big as small remote controller size) - Use of eco-friendly materials: recycled cardboard, biodegradable plastics, and natural fibers - Must convey a modern and appealing look - Also include drawings for foam insert to help with a fully inclusive design Ideal Skills and Experience: - Experience in designing packaging for electronics - Experience with hermatically sealed (not required for this but nice to have someone that has some experience with it) - Strong understanding of sustainable materials and eco-friendly design principles - Proficiency in graphic design and 3D modeling software - A portfolio showcasing previous eco-friendly packaging projects We would like the design to be in a format that...