Cmos amplifier design jobber

Filter

Mine tidligere søk
Filtrer etter:
Budsjett
til
til
til
Skriv
Ferdigheter
Språk
    Jobbstatus
    1,250 cmos amplifier design jobber funnet, priser i USD

    ...on the attached “Simple Hydrophone [logg inn for å se URL]“ document’s design (inside the zip file). If you can locally source the parts, that would be great as it will make the project move faster. If you cannot, we will send you the parts. 2. Connect the newly created hydrophone to a premade amplifier ADC circuit (something like this [logg inn for å...

    $551 (Avg Bid)
    $551 Snitt bud
    6 bud

    ...brain in blue/grey (with RGB colors above - you can decide which blue tones to use to make it look most aesthetic) [logg inn for å se URL] - Make background of light grey boxes (stimulator, amplifier, signal processing) darker - Use one of the blue tones above mentioned for the blue boxes as brackground [logg inn for å se URL] - Delete the two boxes on the right including t...

    $45 (Avg Bid)
    $45 Snitt bud
    16 bud

    ...The camera module should be selectable between area scan and line scan mode. The standard area scan sensors should also be driven as line scan sensor. We want to use standard cmos camera modules as RGB, mono with 2K and 4K horizantal resolutions. During line scan mode we need to reach 25 kHz. Area scan speed can be any 20-30 fps. As the milesotones: 1

    $1 / hr (Avg Bid)
    $1 / hr Snitt bud
    1 bud

    ...The camera module should be selectable between area scan and line scan mode. The standard area scan sensors should also be driven as line scan sensor. We want to use standard cmos camera modules as RGB, mono with 2K and 4K horizantal resolutions. During line scan mode we need to reach 25 kHz. Area scan speed can be any 20-30 fps. As the milesotones: 1

    $1 / hr (Avg Bid)
    $1 / hr Snitt bud
    1 bud

    ...The camera module should be selectable between area scan and line scan mode. The standard area scan sensors should also be driven as line scan sensor. We want to use standard cmos camera modules as RGB, mono with 2K and 4K horizantal resolutions. During line scan mode we need to reach 25 kHz. Area scan speed can be any 20-30 fps. As the milesotones: 1

    $1 / hr (Avg Bid)
    $1 / hr Snitt bud
    1 bud

    ...The camera module should be selectable between area scan and line scan mode. The standard area scan sensors should also be driven as line scan sensor. We want to use standard cmos camera modules as RGB, mono with 2K and 4K horizantal resolutions. During line scan mode we need to reach 25 kHz. Area scan speed can be any 20-30 fps. As the milesotones: 1

    $1 / hr (Avg Bid)
    $1 / hr Snitt bud
    1 bud

    ...The camera module should be selectable between area scan and line scan mode. The standard area scan sensors should also be driven as line scan sensor. We want to use standard cmos camera modules as RGB, mono with 2K and 4K horizantal resolutions. During line scan mode we need to reach 25 kHz. Area scan speed can be any 20-30 fps. As the milesotones: 1

    $1 / hr (Avg Bid)
    $1 / hr Snitt bud
    1 bud

    ...The camera module should be selectable between area scan and line scan mode. The standard area scan sensors should also be driven as line scan sensor. We want to use standard cmos camera modules as RGB, mono with 2K and 4K horizantal resolutions. During line scan mode we need to reach 25 kHz. Area scan speed can be any 20-30 fps. As the milesotones: 1

    $1 / hr (Avg Bid)
    $1 / hr Snitt bud
    1 bud

    ...The camera module should be selectable between area scan and line scan mode. The standard area scan sensors should also be driven as line scan sensor. We want to use standard cmos camera modules as RGB, mono with 2K and 4K horizantal resolutions. During line scan mode we need to reach 25 kHz. Area scan speed can be any 20-30 fps. As the milesotones: 1

    $1 / hr (Avg Bid)
    $1 / hr Snitt bud
    1 bud

    ...The initial setup will use the Raspberry Pi device as both the backend server and headless music player utilising the on-board 3.5mm audio jack for output of music to an amplifier. Within this document we will refer to each Raspberry Pi device as a ‘player’ or ‘players’. ‘Online audio sources’ will refer to Spotify, Tunein Radio and ‘offline audi...

    $665 (Avg Bid)
    $665 Snitt bud
    10 bud

    Hi we are looking for a logo for our new business called the : “Portfolio Amplifier Fund”. We are based in Switzerland. The aim of the fund is to arrange loans against their shares and bonds. Our clients are private banks, financial institutions and wealthy individuals so the logo should be very high quality & elegant feel to it. The logo should

    $150 (Avg Bid)
    Garantert
    $150
    440 bidrag

    ...[logg inn for å se URL]“ document’s design (inside the zip file). If you can locally source the parts, that would be great as it will make the project move faster. If you cannot, we will send you the parts. 2. Connect the newly created hydrophone to an amplifier and sound card and record the sound. The bidder will recommend to us which amplifier and sound ...

    $231 (Avg Bid)
    $231 Snitt bud
    8 bud

    ...[17]. This issue has been recognized as a matter for the planet. While energy saving can be achieved by adopting renewable energy resources or improving design of certain hardware (e.g., power amplifier) to make it more energy-efficient, the cost of purchasing, replacing, and installing new equipment (including manpower, transportation, disruption to normal

    $371 (Avg Bid)
    $371 Snitt bud
    14 bud

    This project involves close understanding of 4 electronics parts - CMOS camera OV7670, STM32 microprocessor, Battery charging module, Bluetooth AT-09. We only have circuit diagrams for individual components but we need Gerber file to place online order for final board. You will have to do: 1. Review components we require on the board and draw a circuit

    $217 (Avg Bid)
    $217 Snitt bud
    25 bud

    need a PCB designed based on ...trim pot to adjust gain of the feedback source level (it will be from another source in a stereo system and will be simple QC tab connector). Most items as per the reference design from TI. 2 layer PCB preferred. 4 layer maximum. [logg inn for å se URL] [logg inn for å se URL]

    $103 (Avg Bid)
    $103 Snitt bud
    6 bud

    need a PCB designed based on ...trim pot to adjust gain of the feedback source level (it will be from another source in a stereo system and will be simple QC tab connector). Most items as per the reference design from TI. 2 layer PCB preferred. 4 layer maximum. [logg inn for å se URL] [logg inn for å se URL]

    $179 (Avg Bid)
    $179 Snitt bud
    10 bud

    I need someone who has good knowledge in transistors to work on a simple project. It is based on JFET amplifiers. Details will be given in chat.

    $28 (Avg Bid)
    $28 Snitt bud
    6 bud

    Power amplifier block with controllable gain and a temperature sensor for the block. LTspice schematic and Altuim design of pcb needed

    $162 (Avg Bid)
    $162 Snitt bud
    15 bud

    In the attached files are the full specifications of this project. I would require a schematic of the design on LT Spice as well as a PCB design on Altium that is ready for fabrication.

    $62 (Avg Bid)
    $62 Snitt bud
    13 bud

    Audio amplifier design USB input, media player Bluetooth ------------------------------------------------------------------------------------------------- requirements are : 1. The media player only needs to play audio files, it would be better to include .wav format 2. Can you create a simple method of displaying the functions of the media player

    $153 (Avg Bid)
    $153 Snitt bud
    10 bud
    Logo designer needed Avsluttet left

    The brand is called "Van Hunks". We are a startup building audio amplifiers. The logo will be engraved on the metal face plate of the amplifier. Van Hunks is the name of a man in a local legend. He had a pipe smoking competition with the devil on Table Mountain in Cape Town and won. The logo could maybe feature the silhouette of Table Mountain

    $21 (Avg Bid)
    $21 Snitt bud
    27 bud

    I want to make a DC amplifier - microvolts in millivolts out. There is a circuit on the TINA website. ([logg inn for å se URL])

    $138 (Avg Bid)
    $138 Snitt bud
    25 bud
    Electronic design Avsluttet left

    ELECTRONIC CIRCUIT DESIGN Audio preamplifier circuits for USB input, media player bluetooth Attachments as follows 1. Flow chart 2. Stereo amplifier input circuit 3. Surround amplifier input circuit 4. Remote control Budget is negotiable

    $350 (Avg Bid)
    $350 Snitt bud
    12 bud
    Swing Weight Scale Avsluttet left

    Current project is building a digital swing weight scale for golf clubs. Digital scale portion is built using an Arduino Nano, 1kg load cell, HX711 load cell amplifier, a pushbutton, and a 1602 I2C LCD. Attached is the code which works fine and a pic of readout I’m getting on LCD. All good. What I would like to do is convert the gram weight to swing

    $54 (Avg Bid)
    $54 Snitt bud
    9 bud

    Sophisticated 8 channel amplifier board. Schematic and partial pc-board layout available to start from

    $1997 (Avg Bid)
    $1997 Snitt bud
    28 bud

    I am seeking a top level device developer

    $12 / hr (Avg Bid)
    $12 / hr Snitt bud
    9 bud

    ...GPIO C, D, E, F (16 combinations here), selecte one of the 16 Ogg music files to play. 3. Using I2S to send the music data to another chip to play (Adafruit I2S 3W Class D Amplifier Breakout - MAX98357A). 4. After the Ogg music files is finished, enter deep sleep mode again. You will make two videos for part A and part B to show everything is working

    $401 (Avg Bid)
    $401 Snitt bud
    9 bud

    Based on my current design of CDS active pixel, I'd like to have it extended in order to make an implementation of CMOS Image Sensors of array 512x512 at least. You need to make a proof of concept and make simulations of it. We'll use Cadence Virtuoso 6.17

    $221 (Avg Bid)
    $221 Snitt bud
    6 bud

    ...experienced analogue electronic design engineer with good English communication skills to work on designing a circuit to meet our specific requirements and to provide us with regular updates. The circuit will operate from 5V DC by USB power, and comprise of a white noise source, external audio input, signal mixer, and power amplifier to drive an external resistive

    $719 (Avg Bid)
    $719 Snitt bud
    12 bud

    an electronics engineer required having expertise in CMOS digital logic circuits and LTSpice

    $26 (Avg Bid)
    $26 Snitt bud
    17 bud
    cadence_matlab03 Avsluttet left

    ac...need guidance for simulation of CMOS Gate "To understand fundamental concepts underlying CMOS gate speed and power performance, as covered in ELEC 372/472, in the context of design. To design, verify and investigate CMOS standard cells conforming to the specified design rules using a professional, integrated circuit design package, named C...

    $74 (Avg Bid)
    $74 Snitt bud
    4 bud

    ...equipment I have, I need someone to draw the map for me on how to install and remotely program the system for me! include in your proposal how would you link the speakers to the amplifier, to see if you read the description! VERIS2-212S-BLACK - Subwoofer, 12", 4ohm, 300W BLU50 - 4 Chnl Analog Mic/Line Input EC-4BV-BLK-US - Ethernet Controller 4 Buttons

    $35 (Avg Bid)
    $35 Snitt bud
    7 bud
    Simple App Icons Avsluttet left

    I need the following: - Company logo (app icon) - Microphone icon - Amplifier icon - Profile icon - Calendar icon, - Management icon - Edit icon - Delete icon, - Add icon - Post icon - Comment icon All those and possibly some more. You will find my rough draft for a company logo attached, doesn't have to be based off of this. If the job is done

    $74 (Avg Bid)
    $74 Snitt bud
    28 bud
    cadence_matlab02 Avsluttet left

    I ...need guidance for simulation of CMOS Gate "To understand fundamental concepts underlying CMOS gate speed and power performance, as covered in ELEC 372/472, in the context of design. To design, verify and investigate CMOS standard cells conforming to the specified design rules using a professional, integrated circuit design package, named C...

    $52 (Avg Bid)
    $52 Snitt bud
    3 bud
    cadence_matlab01 Avsluttet left

    I ...need guidance for simulation of CMOS Gate "To understand fundamental concepts underlying CMOS gate speed and power performance, as covered in ELEC 372/472, in the context of design. To design, verify and investigate CMOS standard cells conforming to the specified design rules using a professional, integrated circuit design package, named C...

    $79 (Avg Bid)
    $79 Snitt bud
    4 bud
    Trophy icon Design Logo for Music Studio Avsluttet left

    Hello, I'm looking for someone to design a logo for my private music studio. The name of the studio is "Pearlhouse Recordings". I'm still unsure of which direction I want to go exactly with the logo, so I'm open to many ideas. Some of the general directions I have been leaning towards include:Old rock and roll flyer for a show like for The Doors

    $173 (Avg Bid)
    Garantert
    $173
    440 bidrag

    need information how to construct amplifier with gain controlled via voltage high speed

    $29 (Avg Bid)
    $29 Snitt bud
    22 bud

    ...ground to programmed PI input pins Hardware features: Outputs: HDMI and Video composite for additional monitors and Audio L / R via USB Audio Adapter to feed an external amplifier. Software update and update of media file libary on the device via USB AUX connector (socket or cable) to 3,5mm connecting mobile phones or MP3 players for Audio input Touchscreen:

    $653 (Avg Bid)
    $653 Snitt bud
    6 bud

    Looking for a team able to develop an AI-based image enhancement software, with the ability to...accurate, exactly the same as real life, producing better images than even the best cameras currently available. This piece of software will need to be trained on our 41MP CMOS sensor, and according to hundreds of different lighting situations and scenes.

    $9471 (Avg Bid)
    $9471 Snitt bud
    17 bud

    I looking to purchase a Baluff BCW0004 Capacitive Liquid Level Sensor with an IO Link Amplifier. Need assistance figuring out what other pieces of equipment I need and also need help programming a simple SCADA/HMI to read the liquid level in a container and store the data. I am not sure if I need a plc or not.

    $147 (Avg Bid)
    $147 Snitt bud
    14 bud

    Hi, we need to develop linux driver for our expansion board for the Beagleboard X15. The expansion board contains 2 CMOS Sensor of Onsemi MT9V024 and will work in parallel / stereo mode. The CMOS Sensors can be configured by i2c interface and the data out will go via LVDS to Deserializer to Video Parallel (VIP). Now we need an expert who can assist

    $222 (Avg Bid)
    $222 Snitt bud
    4 bud

    I need an active (12v DC power supply), low noise, low frequency (1Hz to 10Hz) receiver/amplifier (3V peak to peak output) with a low pass filter set at 12Hz. I need the design, schematic, and PCB design in Altium. The PCB will need to be 28mm wide. Length and layers are flexible

    $215 (Avg Bid)
    $215 Snitt bud
    18 bud
    ESP32 TTGO Shield Avsluttet left

    We need the design for a PCB to be used as Shield for ESP32 TTGO Lora V2.0. The shield should be according to the schematic attached and according to the information on this description. ESP32 TTGO Lora V2.0: ([logg inn for å se URL]) Load Cell Amplificator HX711: ([logg inn for å se URL])

    $533 (Avg Bid)
    $533 Snitt bud
    19 bud

    I am a 60 year old project engineer working on the design of a high frequency sensor. I am looking for an experienced Electronic Engineer that can perform Circuit design. The purpose of the design is to provide a stable gate biasing circuit for a LNA amplifier to properly biasing the amplifier to draw the optimum amount of current (Id = 25mA). Please

    $129 (Avg Bid)
    $129 Snitt bud
    12 bud

    ...would be from amplifier to Woofer. The scope of the work would include developing the hardware (which should be pretty straightforward since this is a Wireless SOC with its own MCU), write the code for wireless communication and supplying at least 2 working pairs of the transceivers. You would on completion transfer the entire design data, software

    $248 (Avg Bid)
    $248 Snitt bud
    1 bud

    Hello, I need to design a 2.1 soundbar PCB along with DSP programming. I have a reference design of Texas Instruments's value soundbar which have onboard amplifier chips, DSP, EPROM etc. I need some modification on this PCB according to my design requirement.

    $361 (Avg Bid)
    $361 Snitt bud
    12 bud

    CMT is seeking bids for time and cost to create a hardware design and layout for a small circuit board based on the TI CC2652 microcontroller, plus supporting circuitry (e.g. power, clocks, integrated BLE antenna, sensor connections, etc)This board will be worn at the nape of the neck, integrated into a sof skull cap for sports and other highly physical

    $1225 (Avg Bid)
    $1225 Snitt bud
    16 bud

    I need a freelancer to generate a list of Chief Marketing Officers at different companies in the USA. I need the information in a .csv. The emails must also be verified with a mail tester tool. I need the following columns in the .csv file: First Name, Last Name, Title, Email, Phone Number, Company Name, Website. I need at least 600 leads. The freelancer who can deliver the most leads will be...

    $157 (Avg Bid)
    $157 Snitt bud
    22 bud

    Hi Dorothy, Im looking to finish formatting my manuscript for e-publishing (Amazon) and hard copy. Also, my references need to be converted to footnotes, preferable CMOS. Can you do this job?​ If so, your cost and turn around time. Thanks

    $115 (Avg Bid)
    $115 Snitt bud
    26 bud