Blynk jobber

I have Arduino code and a svc model and I’m using a application called Blynk for visualization I want to send the reading of the moisture sensor to the svc model as an input for prediction and send the prediction back to the Blynk or Arduino so if the output is 0 it stop watering and if its 1 it start watering

I have Arduino code and a svc model and I’m using a application called Blynk for visualization I want to send the reading of the moisture sensor to the svc model as an input for prediction and send the prediction back to the Blynk or Arduino so if the output is 0 it stop watering and if its 1 it start watering

I'm in search of a talented illustrator who can design an adorable and captivating cartoon mascot for our upcoming internet and mobile retail platform. The primary aim of this mascot is to embody the essence of cuteness and mischievousness to appeal to our target audience. The business is called Blynk Internet and Mobile and has a purple colour theme so we are looking for a cute small purple-haired creature with one or two cute large eyes and in various poses such as giving two thumbs up next to the business logo on the site header, using a laptop, etc. Key Points: - The mascot needs to be in cartoon/creature form - The main emotion to be conveyed is 'Cuteness and mischievousness' - Expected usage includes Website, Mobile app, Marketing materials, and Television Id...

I am looking for an expert in IoT who c...who can develop a custom lighting and device control system for my home. - Capabilities Needed: - The ability to control lights, thermostat and door shutters using Blynk or similar platforms. - Automation control with a mobile application will be required as well. - Mobile Application: - I prefer the use of Blynk or a similar cross-platform management tool over a specifically iOS or Android-only platform. - UI/UX Design: - I want a mobile application that is simple and easy to use, similar to the interface on platforms like Blynk. Applicants must have extensive experience with IoT systems, preferably with Blynk or similar platforms, and excellent understanding of automation control. Knowledge of UI/UX de...

...need of someone to develop a project where the ESP32 and Blynk application will be used for sensor integration, specifically involving a NO switch, GPS module. This project is for an IOT based NO switch that knows where it is (Hence the GPS) PCB is to be compact, low power consumption. Firmware is to be provided for the PCB The application must be Blynk based. The application must be simple to use and have a map and status page for each PCB as a minimum. The app must recognise when a PCB is powered/paired and show this on the status page. The Application is to be scalable - we may need 40-50 units when busy running on the same app. Ideally there is capacity for more. Deliverables are: PCB (Hardware) Application based on Blynk Firmware for ESP32 Full instr...

I am looking for a freelancer who can assist me with an IOT based project using Arduino and Blynk. The project involves the following tasks: - Hardware Setup: I need assistance in setting up the Arduino and Blynk hardware for the project. The preferred programming language for this project is C++. I already have the necessary Arduino and Blynk hardware for this project. Ideal skills and experience for this project include: - Proficiency in C++ programming language - Experience with Arduino and Blynk hardware setup - Knowledge of IOT concepts and protocols

For my latest IoT-based venture, I'm in urgent need of a highly skilled Embedded Engineer. The chosen freelancer will tackle the following important tasks: - ESP 32 microcontroller programming - Internet of Thinks (IOT) - Blynk server - Current sensor, RFId tag & reader, relay The project revolves around key components such as sensors, microcontrollers, and a Blynk server, making expertise in these areas a must. Proficiency in using Wi-Fi as a communication protocol is also necessary to ensure the successful execution of this project. As an ideal candidate, you'll have a proven track record in embedded engineering for IoT applications. Your portfolio should showcase your ability to successfully handle similar tasks. Let's connect and bring this IoT conce...

To create a project using the Blynk app, I'm looking for a freelancer with expertise in data monitoring and tracking. The project must be written in the Blynk app and incorporate specific features and functionalities that I have in mind.I'm open to suggestions and am expecting the ideal freelancer to be able to work out the best possible solution for this project. With your help, I'll be able to create an efficient and optimized data monitoring and tracking program tightly integrated into the Blynk platform. Thanks in advance for your assistance!

Sensor Data Collection with Arduino ESP8266 NodeMCU CP2102 Programmable Temperature controller with timer 16x2 i2c display Blynk app settings - Desired functionality: Sensor data collection - Specific sensor type: Temperature sensor - Preferred programming language: Any (C++, Python, or Javascript) Skills and experience: - Proficiency in Arduino programming - Knowledge of ESP8266 NodeMCU CP2102 - Familiarity with temperature sensor integration - Understanding of wireless communication protocols - Ability to collect and analyze sensor data - Experience in home automation projects is a plus The project requires the development of a system that can collect temperature data using a temperature sensor and Arduino ESP8266 NodeMCU CP2102. The ideal candidate should have experience in Ar...

Bonjour, Je suis à la recherche de quelqu’un ayant une bonne expérience en robotisation application/arduino j’ai créé un robot Sterilisateur a uvc en arduino autonome sur base de capteurs à ultra sond et d’un capteur de mouvement pour allumer ...d’un capteur de mouvement pour allumer et éteindre la lampe au cas où quelqu’un rentre dans la pièce. J’aimerai que quelqu’un créer une application je veux que dans l’application je puisse le diriger et appuyer sur un bouton pour que le mode autonome s’active. De plus mon robot sera doté d’une caméra Esp32 qui est doté d’un flash afin de voir le trajet du robot. De préférence MIT App in...

Progetti di Telecontrollo IoT con ESP32 e Blynk Desired Outcome: - Remote monitoring and control of devices Hardware Design: - Partial assistance required Communication Platform: - Cellular Skills and Experience: - Experience with IoT projects using ESP32 and Blynk - Proficiency in hardware design and integration - Knowledge of cellular communication protocols - Familiarity with remote monitoring and control systems - Ability to analyze and collect data from devices

I am looking for someone to assist me in programming an ESP32-S3 based Line following robot which uses GPS+MPU6050 module/similar. I have made the code to soe extent and need to get it completed. ... I have made the code to soe extent and need to get it completed. The lines wouldn't be straight and would be similar to that in roads. The line following robot should get to the desired location by following the lines and should work in line junctions where it will use GPS and the MPU6050 (compass+accelerometer) to turn to the desired location. The data will be then stored in the SD card. Blynk app will be used for turn on and off and to set the waypoint. Detailed explanation will be given in chat. Sensors used: ESP32-S3 MPU-6060/ BMI270+QST Compass IC GPS module 2 IR modul...

kebetula...inkubator bayi menggunakan stm32. saya sensing temperatur dan kelembaban menggunakan AHT10 dan rencananya akan menambahkan sensor heart rate menggunakan MAX30102. Dari data sensing tersebut nantinya mau ditranmit ke esp01 menggunakan UART, lalu mengirimkan data tersebut dari esp01 ke server Blynk. Nanti di blynk akan muncul data dari AHT10 dan MAX30102 dan juga rencananya akan dapat mengatur tingkat kelembaban dan temperatur dari blynk. Nanti tingkat kelembaban dan temperatur yang telah diatur dari Blynk akan dikirimkan dari esp01 ke STM32 menggunakan UART. Dari data tingkat kelembaban dan temperatur tersebut nantikan akan digunakan sebagai variabel untuk mengaktifkan relay. Permasalahan terbesar saya berada pada komunikasi serial antara stm32f103c8t6...

I am looking for a freelancer who has experience with Blynk GUI IoT to assist me in creating a weather monitoring system. The following are the specific requirements for the project: - The project will involve using a Raspberry Pi device. - The system will need to monitor temperature and humidity data. - The ideal candidate will have experience in working with Blynk GUI IoT and be able to provide guidance and support throughout the project.

I am in need of a skilled freelancer who can help me with my ARDUINO IDE code problem for my SIM7600 GSM module. Currently, I am experiencing functionality issues with my code, and I have a list of specific requirements that I would like to be implemented. For this project, I need someone who is experienced with...ARDUINO IDE - Familiarity with GSM modules and communication protocols - Ability to troubleshoot and debug code efficiently If you are interested in this project, please provide examples of similar work you have done in the past. I am looking for someone who can work quickly and efficiently to help me resolve this issue. I always get the GPRS fail error, and my system is not able to connect with the Blynk website. Just need to check the code and make it working version ...

We have an existing ESP32 controller with TFT screen to control commercial appliances & would like to make some changes to code and improve the board design to be more robust for commercial enviroment, the freelancer would need experience in PID temperature control, Stepper control, ESP32, Blynk and circuit board design for commercial applications. The original Author of the project is unfortunatly no longer available. We would need a NDA for the project. Please make contact to discuss further if you can meet the brief, we are open to your expertise for design and the work can be ongoing where changes are needed in the future, so we are looking for somene reliable and available to discuss issues as they arise.

To build a weather station using esp8266 nodemcu model.. that forecast weather like temperature humidity rain air pressure using dht11 and bmp180 and one rain sensor and the will be shown in web server or any third party apps like blynk or thingspeak all u need to do is design a circuit and write the code for it... I know it is available in YouTube but I just want a neat code..

Parts of sketch for ESP32 is done and Blynk template is prepared. All hardware is done. The code for ESP32 and Blynk interface need to be finished. See document.

...board, and now it can be optimized and have some components that aren't used removed. Firmware: Priority is to get the firmware code cleaned up and to function exactly like the previous code (working LEDs during charging, turn on lights during plug in, same color code during battery pack charge). Second goal is to use the WiFi capability of the ESP32 to remotely monitor the docks using an IoT (ex: Blynk). The Charging Dock is similar to the ones you worked on, with differences: - uses a micro-USB instead of type C - uses an ESP32 chip - same 120W ac dc power supply and barrel supply as the 5 slot charger Let's use the knowledge learned from the 5 and 10 slot type C chargers on this design. Deliverable: ● BOM of electrical components ● Gerber files (electrical design,...

I have tested three sensors individually and I want someone to combine them all and fix if has un accurate readings and send all the data to be display on Blynk

I need the achieve the following steps by using Matlab and blynk app software: 1. To design and develop a WSN system integrated with a power protection scheme to detect the fault. 2. To analyse a suitable CT placed at the differential current point or the EM relay. 3. To design and develop the Blynk App to show the fault detected in the network.

my topic is need to achieve the following steps by using Matlab and blynk app 1. To design and develop a WSN system integrated with a power protection scheme to detect the fault. 2. To analyse a suitable CT placed at the differential current point or the EM relay. 3. To design and develop the Blynk App to show the fault detected in the network.

To build a weather station using esp8266 nodemcu model.. that forecast weather like temperature humidity rain air pressure using dht11 and bmp180 and one rain sensor and the will be shown in web server or any third party apps like blynk or thingspeak all u need to do is design a circuit and write the code for it... I know it is available in YouTube but I just want a neat code... That's all

I have some basic code written for arduino, running on an Esp32 and NodeMCU. Code measures electricity using the esp32 and controls a relay (hot water cylinder) on the NodeMCU based on electricity measurements (see NodeMCU code attached) I need someone to modify the code on the NodeMCU so that it records how long the relay has been on in the last 48hrs and switches the relay if ...electricity using the esp32 and controls a relay (hot water cylinder) on the NodeMCU based on electricity measurements (see NodeMCU code attached) I need someone to modify the code on the NodeMCU so that it records how long the relay has been on in the last 48hrs and switches the relay if the cylinder hasn't had sufficient heating. Also, add a manual "heat for 2hrs" function that can be activated...

I'm trying to build a project to measure 240v AC electricity at our grid connected, PV assisted home, and switch applicances on and off depending on excess PV generation. I have nodemcu and esp32 modules. I'm only learning arduino coding and am brand new to Blynk, but think these two will fulfil the project. I'm looking for someone who is experienced in arduino + blynk to help me set this up. Please share me a couple of screenshots of something similar that you have done, to prove that you understand more than I do:)

TENGO UN PROYECTO IOT FUNCIONANDO A LA PERFECCION CON BLYNK AHORA QUIERO AGREGAR UN CODIGO PARA MEDICIONES DE VOLTAJE.

Application for controlling Home Automation. Application example BLYNK

We already have half cooked code we just need to optimize it. Need to be done via anydesk and start immediately The sensors are wahoo cadence sensor And other side we can have a windows pc Goals to be achieved : •Single device connection •Multiple device connection •Single device statistics •Multiple device statistics •Export to blynk •Average cadence •Latest cadence •Start and stop button

The sensors are wahoo cadence sensor And other side we can have a EPS32 or raspberry pi or windows pc whatever u want Goals to be achieved : •Single device connection •Multiple device connection •Single device statistics •Multiple device statistics •Export to blynk •Average cadence •Latest cadence •Start and stop button

TENGO UN CODIGO ARDUINO EL CUAL LO QUIERO PONER A TRANSMITIR POR BLYNK

...switch between total accumulated hour of each power input lines 9. The meter doesn't have a reset button, reset is only possible through for reference of similar project, please review the following (difference in this project is that the two power lines would need to connect directly to the Arduino energy monitor) 1. has a back up battery built in that can make the device work for 2 hours with no power 2. has a built in storage capacity 3. has an LCD screen to display the readings and measurements 4. Has GSM / GPRS module to send data to a server deliverable within 4 weeks should work as close to the final product as possible at least when it comes to the packing of all the modules together

Hi Hemant Liladhar R., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I'm a hobyist and would want you to convert my old and inefficient Blynk code into efficient one for New Blynk Iot platform .

i want to design a WSN system for fault detection in power system network by using Proteus CAD software detection fault with blynk app and the methodology I will give it in file

I want to have a developer that can help me with development of code for Arduino. First step is to get the sensors going and migrate the code for PH sensor and EC sensor from DFRobot. Next step to connect to wifi and send data to BLYNK. Step 3 is to manage 4 pumps from the values of the sensors. You need to be able to work this now with it and have the time. You need to do sketch and code and check that in GITHUB. You need to have advanced skills in arduino and development.

We are looking for a hybrid mobile developer with several years of experience in mobile development. We have designed an Android app and now we are looking to redesign the app for both Android and iOS with Ionic. The project An IoT application that lets the users monitor and control remotely our devices that they purchase from us. It will be a platform like Blynk or Platformio. We'll provide the UX and maybe the UI too so all we need is to develop a reliable scalable app. The ideal candidate • Should be available to work minimum 30-40h per week to complete the project • Demonstrate deep understanding of mobile development and the Ionic Framework • Fully understand the goal of the project and offer suggestions if any • Provide detailed timeline for the c...

I’m wanting to build esp32 with a SHT 31 humidity and temp sensor. Already have one that works but need an additional one built. Would like to use Blynk platform for controller.

Need help with coding and connecting to cloud servers. (Arduino cloud/ azure & Blynk/IFTTT) Remote help if possible.

The requirements of my project is IoT (blynk+arduino) and consists of below components: a. PH sensor - can set a threshold value min & max value, if exceeds or below then notification trigger. b. Water temp sensor - can set a threshold value, if exceeds value then trigger notification and turn on cooler fan relay ; if below then turn on heater relay. c. TDS sendor - can set a threshold value min & max value, if exceeds or below then notification trigger. d. Ultrasonic sensor for plant - can set a value if exceed then trigger notification. e. Ultrasonic sensor for water - can set a value if lower then trigger notification. f. Relay for Water pump and air pump is always on. g. Water flow sensor - set a default value if lower then notification trigger. h. Digital light sensor ...

I need dedicated mobile apps for IOI and Android with features similar to other IOT platforms such as Blynk and EWELINK. It is important that the devices can be provisioned, grouped, schedule support and that real time data can be monitored and extracted. I also need a web platform where I can manage the devices efficiently and group them into organizations. The servers shall be able to scale and be hosted in the cloud or locally.

Looking for a programmer: Data monitoring during a FCEV fueling by using IR Sae j2799 communication protocol is used during fueling which communicates basic data like tank temperture and pressure. Aim is to use a IR led to read communication between car and dispenser. BLYNK can be used as logging tool

Hi Narayanan Nampoothiri K., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I want a esp8266 code for automatic irrigation system using one capactive soil moisture sensor which gives soil moisture readings and turns on and off the relay when set threshold of moisture is acheived. I also want Blynk iot intergration in it. Please Reply

You will have to provide a complete working solution including al...ok) I am looking to monitor temperature & humidity and control lights, fan, humidifier, heating and cooling. The electronics should also include a small oled or other display to continuously display temperature and humidity. The board should communicated to a phone where I should be able to set some logic for the controller. For example to schedule the lights/fans… and specific scenes. Using Blynk or any other appropriate platforms can be an option. Once the user set the settings via the phone, the controller should function accordingly even when disconnected or after a power failure. Only vendors with proven experience with such technologies will be considered. Please cerfully read the attched req...

Needed: We're looking for someone to join our small team who is proficient in coding in Python, MicroPython, C++ or a similar micro-controller language in order to integrate an ESP32 or similar board with other hardware. Our need is to enable communication between commercial off-the-shelf hardware, firmware and software and then use Blynk, or a similar platform, to develop the machine-human interface. This is a drone (UAV, unmanned aerial vehicle) related project so a good familiarity with basic mechanics and dynamics is necessary. ArduPilot familiarity would also be advantageous, but not necessary. Multiple environmental and situational sensors will need to be integrated, so logical programming will need to be written to include these sensors and flight actuators (servo o...

Help me to configure iot blynk on my raspberry pi and set the device online. We can use teamviewer or gmeet and guide me to set it up.

Hi, I am trying to connect my ESP8266 with Arduino Mega 2560 to connect it to WiFi. I want to use the blynk or any opensource app.

Hi, I am trying to connect my ESP8266 with Arduino Mega 2560 to connect it to WiFi. I want to use the blynk or any opensource app.

You will have to provide a complete working solution including all the hardware and software. select the electronics (...ok) I am looking to monitor temperature & humidity and control lights, fan, humidifier, heating and cooling. The electronics should also include a small oled or other display to continuously display temperature and humidity. The board should communicated to a phone where I should be able to set some logic for the controller. For example to schedule the lights/fans… and specific scenes. Using Blynk or any other appropriate platforms can be an option. Once the user set the settings via the phone, the controller should function accordingly even when disconnected or after a power failure. Only vendors with proven experience with such technologies wi...

Hi Kennedy S., I noticed your profile and would like to offer you my project. We can discuss any details over chat. Have a simple Arduino project. Using NodeMCU, L298N to control two motor ( with forward and backward moving state) and a servo motor through blynk. Would need the actual designed circuit, PCB diagram, code and annotation, and also video on coding and setting explaination.

Hi Kennedy S., I noticed your profile and would like to offer you my project. We can discuss any details over chat. Have a simple Arduino project. Using NodeMCU, L298N to control two motor ( with forward and backward moving state) and a servo motor through blynk. Would need the actual designed circuit, PCB diagram, code and annotation, and also video on coding and setting explaination.

Crear un proyecto de arduino con tarjeta ESP8266 y blynk 2.0 Se tratará de un sistema de riego automatizado, con dos válvulas controladas a través de una aplicación de blynk con funcionamiento manual/automático